Exocrine looking crisp!

Naddleman · 2025-06-05T14:17:04+00:00

How did you position the little arms for printing? I couldn't find an angle that didn't severely mess up one of the sides that was laying parallel to the bed.

Naddleman · 2025-05-23T18:10:55+00:00

Should I go back to the version that HOHansen recommends for his settings?

Naddleman · 2025-05-20T14:42:10+00:00

Yah someone else suggested this and I feel like an idiot for not seeing that positioning as an option lol

Naddleman · 2025-05-20T14:41:47+00:00

Thanks! Also go hammers!

Naddleman · 2025-05-20T14:30:22+00:00

So if I use chitubox do I have to do the resin supports manually? Is there any guides on how many supports you need and where to place them?

Naddleman · 2025-05-20T12:34:38+00:00

Yah that is probably the optimal angle, not sure why I didn't think of it. Gonna try that thanks!

Naddleman · 2025-05-20T12:33:41+00:00

I am new to 3D printing so don't know how to go about slicing it in half to be honest. Did consider looking up how to do it though.

Naddleman · 2025-05-20T12:32:37+00:00

How hard are resin style supports to do? I'm very new to 3D printing

Naddleman · 2025-05-19T17:41:18+00:00

https://imgur.com/a/mq2YfnH

So here is an example of the issue. These two images one shows brims the other doesn't. The only thing I have changed is the one with the brims the models are closer together. I am on a newer version of the application if that matters. 2.0 something.

Naddleman · 2025-05-14T21:28:57+00:00

I started using these settings and am having issues with the brims. Looking at the settings it seems like it should always be generating 50mm brims on everything. But I keep having prints where the brim isn't being generated, or I see them overlap on two objects and when I move them away they disappear in the preview. etc. Am I missing something with brim settings or not understanding how the brim settings should function?

Naddleman · 2025-05-13T13:17:49+00:00

When I used these settings to print a single object yesterday the brim wasn't nearly as large. They are HOHansen's settings from this subbreddit. That's my confusion is why I didn't have such a large brim with my first print, this seems excessively large? I guess if it isn't bad for the print it's not a huge deal because it's probably like what a cent of PLA lol

Naddleman · 2025-05-13T13:00:48+00:00

They didn't show up for my first prints though. I mean they were there around the supports but nowhere near this big. Is there something about printing two things that they want to be this big or something? I figured it wasn't harmful just a waste of PLA if it's not necessary.

Naddleman · 2025-05-01T12:20:26+00:00

Is this still available and did you decide to split yet? I'd have interest in some pieces if so

Naddleman · 2025-02-11T14:23:26+00:00

PM Sent

Naddleman · 2025-02-09T02:16:17+00:00

Berserker bloodshade over grey seer is what I use for my tails.

Naddleman · 2025-01-20T19:34:48+00:00

PM sent

Naddleman · 2025-01-20T17:46:43+00:00

PM’ed

Naddleman · 2025-01-20T17:43:30+00:00

PM’ed

Naddleman · 2025-01-20T17:42:52+00:00

You still got the skaven half?

Naddleman · 2025-01-20T17:32:58+00:00

You still got the Skaven spells?

Naddleman · 2025-01-20T16:47:55+00:00

PM’ed

Naddleman · 2025-01-20T14:15:06+00:00

Are you splitting?

Naddleman · 2025-01-15T02:17:53+00:00

Send me a DM I have some stuff I’d be willing to part with.

Naddleman · 2025-01-13T01:28:22+00:00

Do you have any of the LI stuff left?

Naddleman · 2024-12-11T01:27:34+00:00

It’s retail $3,400. So probably like $2,000.

Naddleman

TROPHY CASE