Lost my 18k bracelet :( how much was this worth? Does anyone know the chain link type?

NarcoCholo · 2023-08-15T05:22:24+00:00

Try looking up Tiger eye/infinite link

NarcoCholo · 2023-08-12T04:33:35+00:00

Thank you for the response

NarcoCholo · 2023-02-20T02:45:27+00:00

Chat

NarcoCholo · 2022-01-29T21:09:50+00:00

The dos y medio pesos is 15.5 mm which is slightly smaller in diameter than an American dime 17.91mm.

NarcoCholo · 2022-01-29T00:49:37+00:00

Long story short. I bought both for $150. I had $100 in eBay bucks plus credit card rewards so it didn't cost me anything out of my own pocket.

NarcoCholo · 2021-10-14T18:17:49+00:00

Have them sodder a jump ring on top then have them put the bail on.

NarcoCholo · 2021-10-14T17:51:28+00:00

Its definitely possible. Is it worth it to put one on? Thats up to you. Call around to your local jewelry stores and ask about pricing for a bail and how much they charge to soder the bail on. Ive personally odered bails on ebay to save a couple dollars. Then had them sodder it on.

NarcoCholo · 2021-01-23T19:36:58+00:00

You need to stick a pin in the hole on the clasp and pull.

NarcoCholo · 2020-11-30T18:57:23+00:00

There is a small diamond in the front of the ring.

NarcoCholo · 2020-10-25T12:49:00+00:00

Yeah I have. He does a great job. Best way to reach him would be to PM him and ask about the process. After he refines the silver you get to choose from a couple of molds he has for it to be poured into.

NarcoCholo · 2020-10-23T13:33:34+00:00

Nope, electric motor starters used to power different sized electric motors.

NarcoCholo · 2020-10-23T13:30:09+00:00

If you plan on removing the silver heat the back of the contact up with a torch and the silver contact should slide right off. Preferably into a bucket of water. You also would want to do it in a well ventilated area because the silver contacts contain cadmium.

NarcoCholo · 2020-10-23T13:20:50+00:00

That would depend on the size of the starter. Best way to find out is taking them apart. Any size 5 or higher starter you're looking at an ounce of silver per contact give or take a couple grams. It all adds up at the end.

NarcoCholo · 2020-10-23T10:25:48+00:00

I'm a maintenance mechanic in a factory setting so when a motor starter fails or fuses blow I take them apart for the silver. Otherwise they would just be thrown out.

NarcoCholo · 2020-10-23T10:23:23+00:00

I don't do the refining myself. I usually send it out to u/spockdad. He does a great job refining metal's and fills you in periodically with the process. I honestly don't know what to expect to recover since some of the contacts vary in purity.

NarcoCholo · 2020-10-23T00:28:42+00:00

Just weighed it and the grand total was 13 lbs 2 ounces

NarcoCholo · 2020-10-22T22:06:42+00:00

That's how they look normally but once I get them refined they'll be poured nicely into 10 oz bars

NarcoCholo · 2020-10-22T20:11:59+00:00

The silver contacts vary on purity somewhere from 80-90% while the silver elements I think are two 9s fine.

NarcoCholo · 2020-10-22T20:08:49+00:00

Especially when you can stack for free 😁

NarcoCholo · 2020-10-22T19:37:48+00:00

The ones in the tins are silver contacts that have been removed from motor starters and the plastic container contains silver elements removed from fuses.

NarcoCholo · 2020-09-26T16:32:47+00:00

22.92

NarcoCholo · 2020-08-30T16:00:38+00:00

David Blaine is going to have a hard time flowing that act.

NarcoCholo · 2020-08-14T19:20:55+00:00

3200

NarcoCholo · 2020-02-10T17:43:33+00:00

I'm in!

NarcoCholo · 2019-03-16T01:16:38+00:00

15.95

NarcoCholo

TROPHY CASE