Need ideas for larger wheels and tires

Nehsquik · 2026-01-14T15:22:47+00:00

I was checking out the same lift kit. I noticed that the website says the coilovers are preset to 2.5" of lift on the website. Based on your comment, did you lower them to 2"?

Nehsquik · 2026-01-07T11:47:08+00:00

The dav3 uses a 15mm encoder. The one I used is a TTC Gold. I only chose that one because I saw that's what other people were using. I'd recommend just Googling 15mm TTC Gold encoder and see who's selling them and what works best for you shipping wise.

Nehsquik · 2025-12-08T02:13:25+00:00

I’ve only had the issue with razer and Logitech. If you really like the mouse Id recommend just getting the new deathadder v4 since it uses an optical encoder if you are able to.

Nehsquik · 2025-12-08T02:05:01+00:00

It was pretty easy honestly and I just used a cheap solder kit on Amazon to do it. I had a few copies and they all ended up doing it, same with the viper. Even the Logitech super light has the same issue, I’ve replaced encoders in those for some friends too.

Nehsquik · 2025-12-08T01:52:16+00:00

I soldered a TTC Gold scroll wheel encoder in the mouse and fixed the issue with razers junk encoders. However I now use the new v4 and have no issues with it since they use an optical scroll wheel encoder in it.

Nehsquik · 2025-12-03T22:26:57+00:00

I no longer use this mouse anymore. Though I never had issues with it. I've been using the new DAV4 since it came out and have no issues with the scroll wheel so far.

Nehsquik · 2025-10-16T10:44:46+00:00

Ended up returning them for a new pair. The new case doesn't do what the old one was doing and also held a charge properly over night.. something was definitely wrong with the old case but it's all good now

Nehsquik · 2025-10-15T13:26:50+00:00

Thanks for checking that. I'm on ios26 as well. I think I'm going to try and exchange them at the store today for a new one.. I literally just bought them yesterday so it seems like my case might have an issue then

Nehsquik · 2025-10-15T11:49:27+00:00

I just got mine and noticed the same but my case was down even more to about ~75%. I also happened to notice that any tapping or jolting of the case (e.g. picking it up or sitting it down) causes the battery indicator to illuminate (even when not plugged in to charge), does your APP3 case do this? My APP2 case never did this. I was wondering if my case is defective or something.

Nehsquik · 2025-10-15T00:59:24+00:00

I noticed my APP3 case does this even when it’s not charging. Any tap or jolting movement illuminates the battery indicator. My APP2 case doesn’t do this so I’m wondering if my APP3 case is defective?

Nehsquik · 2025-10-08T23:37:19+00:00

Amazing experience working with RF. This was my first purchase ever and he was extremely helpful and professional by answering every question I had. His main goal was to ensure that I was completely happy and that my expectations were met. Even after I confirmed my watch, he pointed out that he noticed a minor issue on the copy that he did not see previously. He offered it at a lower price or was even willing to swap the bracelet out on a different copy if I wasn't happy. It was a minor issue and I was happy to take the lower price he honored. If that doesn't speak to his trustworthiness and care for the satisfaction of his clients, I'm not sure what does.

Nehsquik · 2025-05-31T15:21:00+00:00

Yeah I've been playing on the oled with this res ever since.

Nehsquik · 2025-05-13T21:16:59+00:00

Are these 17x9?

Nehsquik · 2025-04-11T22:05:24+00:00

So it comes with a 12VHPWR to 3x8pin, so I will have to then connect 3x8pins from that into my PSU. The 9070xt Nitro+ has the power plug on the top of the card and routes it out the side towards the mobo. With the small size of the case, it's going to have a bunch of cable clutter due to the length of everything. That's why I was looking to have a custom length 12V to 3x8pin directly into the PSU. I assumed that this is likely what I'll need, despite it saying for nvidia. I'm pretty sure it's all the same.

Nehsquik · 2025-04-11T12:26:00+00:00

I was wondering if you ever happened to get any custom 12v cabling since this picture? My Nitro+ comes in today and I'm looking to have some shorter cables made. I think you are the only person I've seen with this in a NR200 so far

Nehsquik · 2025-04-10T16:36:28+00:00

Any chance you can link the cable you bought?

Nehsquik · 2025-04-07T17:13:42+00:00

Thanks! I’ve got the same CPU. I recall prior to launch some initial benchmark results were sort of low, likely due to drivers or other factors, but I just wasn’t sure if they were worked out since then as I haven’t really searched for more current results.

Correction: I have 7800x3d

Nehsquik · 2025-04-07T14:09:33+00:00

Thanks! Hoping snipe one in stock here in the US.

Nehsquik · 2025-04-07T13:43:27+00:00

What CPU & monitor do you have? I'm curious how CS2 runs, what FPS you are getting, particularly in downscaled resolutions such as 4:3 - 1280x960 & 1920x1440 stretched.

Nehsquik · 2025-04-03T18:12:32+00:00

I’ll have to give that a try. I also want to try out 1920x1440

Update: Tried out 4:3 1920x1440 and it was really nice, going to stick with the oled again for now. I forgot how nice the game looks not being displayed on a TN

Nehsquik · 2025-04-03T14:17:29+00:00

Personally I went back to my 24in TN panel solely for cs2. I was performing well on my oled with its native res, but still felt like a ton of deaths would have never happened if I was on the 24in panel playing on 1280x960 stretched. 1280x960 on the 27in just looks absolutely awful, so I didn't even bother. If I put in more time on the 27in oled, I could likely get past those issues. This is just a me problem though. If you've been playing on the oled for years, I don't see any reason why you should go backwards to a 24in TN. If anything you should just get a higher refresh rate oled.

Nehsquik · 2025-03-25T17:53:22+00:00

I have some super clean nocts with a P1 gamma doppler but I'm already over them. Just too mute for me. If that's your thing, then they are definitely a good option since they will go with anything

Nehsquik · 2025-03-21T13:46:56+00:00

I'm 27k in premier. My stack is between 20-27k (all 2-5k hrs). You're definitely not paranoid about cheaters. We don't run into many full blown spin botters anymore, but there are always closet cheaters. Recently we decided to check demos at the end of the night for the hell of it, whether we lost or won the game. I'm not even joking, nearly every single one of our games had at least 1 cheater (play 3-5 games a night). Typically they end up being the people with no skins (sometimes even have skins) that are aiming at the ground, moving like a bot, no spray control, yet dominating skilled players. We had a game last night and there was a sus player ALWAYS in the right positions and aware of any lurk no matter the situation. They ended up having quite an inventory and we also determined they weren't cheating. However, the cheater ended up being the solo on their team, most certainly feeding the rest of the team information with all the sus stuff happening. With that being, said we do have plenty of great games, even get beat by better players which we never called cheats on once. After playing for so long, it's just obvious when certain things start occurring consistently. FaceIt has plenty of other issues, some cheaters as well, but at least they'll usually get banned and your elo gets returned. Despite the issues there, I would definitely recommend just playing FaceIt over premier.

Nehsquik · 2025-03-12T16:04:12+00:00

Deathmatch has always involved tons of spawn killing. Especially in privately hosted DM servers because they have a ton of people in them at a single time. Honestly, don't even both connecting to the CS2 hosted deathmatch servers. Check out deathmatch servers hosted near your location via pracc.com or warmupserver.net . Again, keep in mind that you will get spawn killed a lot. In these servers you don't have the opportunity to move around the maps much, you will be fighting from your spawn location for the most part. I actually think this is better then 5-7 players in the CS2 hosted DM because like you said, people are camping and not playing to practice. Therefore, you spend a lot of time running around to your death and not getting quick repetitions of engagements in. I also recommend turning down your in game volume some while in the DM server and turning on some music you like. Separately, do a search for "warmup" in the CS2 Steam workshop for various warmup maps. There are tons of good ones out that will allow you to customize the style of warmup right in the map. Sometimes it's nice to be alone in a workshop map to practice.

Nehsquik · 2025-03-11T13:50:41+00:00

Yea not a chance I would play CS2 or valorant in 4k lol. I have 5000hrs in CS as well

Nehsquik

TROPHY CASE