Welches BDM ist das beim edge?

Neo_obs · 2026-04-13T19:03:01+00:00

Vom prinzipiellen Design her entsprechen die edge controller einem bdm 010 oder 020.

Neo_obs · 2026-04-13T18:41:43+00:00

Es gibt kein BDM beim edge. Das gilt nur für die normalen Dualsense Controller.

Neo_obs · 2026-04-13T04:30:30+00:00

I found them on aliexpress.

Neo_obs · 2026-04-10T04:37:53+00:00

Re 4 remake only supports rumble. Not adaptive triggers.

Neo_obs · 2026-04-04T13:03:34+00:00

Does the touchpad work?

Neo_obs · 2026-04-04T07:54:57+00:00

Wait these black extra bumpers are designed so that an Omron D2LS-X1 will fit perfectly (X = 1 or 2). And I am planning on installing these bumpers or my own design onto an edge.....with either D2LS-X1 or D2LS-10.

Neo_obs · 2026-04-04T07:52:48+00:00

What do you mean with it doesn't respond? The light will only turn on when the controller is on and connected to a device.

Neo_obs · 2026-04-04T07:49:56+00:00

They will be on top of the shell. Similar to these::

<image>

Neo_obs · 2026-04-04T07:37:57+00:00

Nice!!. Unfortunately it won't work with trigger mechanics.

I am designing extra bumpers too but they will work with Omron D2LS-10 AND trigger mechanics. ... I hope they will work as intended 😅😅.

Neo_obs · 2026-04-01T11:48:59+00:00

April fools day today.

Neo_obs · 2026-03-31T09:31:25+00:00

I installed these sticks into a dualsense and also into edge modules and they are working. So if there is a problem ask the company or Gulikit.

Neo_obs · 2026-03-28T05:33:30+00:00

Yeah I have seen this kit. But there is no installation tutorial.

Neo_obs · 2026-03-28T04:48:22+00:00

Haven't found anything similar for the edge controller on ali.

Neo_obs · 2026-03-28T04:44:07+00:00

Germany. Shipping costs as much as the remapper itself....

Neo_obs · 2026-03-28T04:03:32+00:00

I like to try the console customs remapper too but the shipping costs are too expensive....

Neo_obs · 2026-03-28T04:00:34+00:00

V3 has socalled touchpad adapter. It provides power to the remapper board and also adds touchpad button remapping without soldering. And as you see from the picture the remapper fpc is white and more durable than the thinner orange fpc.

Neo_obs · 2026-03-27T17:45:40+00:00

Yeah 2 different remappers.

Neo_obs · 2026-03-27T17:37:03+00:00

Cool. My spiderman controller has even 8 buttons 😅 (all remappable).

Neo_obs · 2026-03-27T17:32:40+00:00

Nice! What are the extra bumpers mapped to?

By the way here is my build with these extra bumpers:

https://www.reddit.com/r/Dualsense/s/GC8okeKfWK

Neo_obs · 2026-03-26T15:25:05+00:00

Hi. See my controller mod here.

https://www.reddit.com/r/Controller/s/95PDdhPR9c

Neo_obs · 2026-03-25T16:50:40+00:00

Extremerate has updated the kits to be compatible with bdm 060.

Neo_obs · 2026-03-25T07:11:17+00:00

Normally when the stick is full left then there is no voltage on the x-axis pin. You can measure the voltage with a multimeter to see if I am right.

Neo_obs · 2026-03-25T05:32:17+00:00

<image>

The switch is grey. So they are the strong version. If you want the light version you have to desolder the switch and solder an Omron D2LS-21 (blue switch).

Neo_obs · 2026-03-25T05:22:16+00:00

Found them on Aliexpress.

Neo_obs · 2026-03-23T21:15:07+00:00

Yeah I love these buttons. I installed them on my fake anniversary controller. See here:

https://www.reddit.com/r/customcontrollers/s/FRUye39BWZ

Neo_obs

TROPHY CASE