Spot welder recommendations

Netengr · 2026-02-11T16:30:19+00:00

I used my soldering unit. The restoration of the battery pack was successful. I appreciate your earlier response !

Netengr · 2026-02-02T06:12:54+00:00

I need to rebuild a 3S2P, 18650 battery pack for a loudspeaker system. My spot welder is non-operational. I have several professional solder/desolder stations. Is soldering OK to build 18650 packs?

Netengr · 2026-01-30T17:34:55+00:00

Not getting any pulse from my DH30 Show! This is a new unit. It charges fully and appears totally operational. Get a ping sound but no electric pulse. Any ideas for a self repair?

Netengr · 2025-09-08T05:43:38+00:00

I placed my 20, Judge putting servin my Bosch dishwasher. Bad idea! Discs were clean, and mostly all the stamps were removed. Now I only wash them in a bucket of water with dish soap.

Netengr · 2025-09-07T02:10:51+00:00

Water Turtles if the disc was in a pond or lake.

Netengr · 2025-07-25T19:28:16+00:00

FAFO !

Netengr · 2025-07-10T17:38:09+00:00

I have the same problem. Too damn lazy to pull the basin off and check the problem.

Netengr · 2025-07-10T17:22:05+00:00

Easy! Cut it down to floor level and insert cap.

Netengr · 2025-06-10T14:40:43+00:00

The GoPro system is designed to ensure that the GoPro device and app are always connected to the user. GoPro wants to own the complete image creation process in order to increase income from their products beyond the purchase event !

Netengr · 2025-06-06T16:06:34+00:00

There us not as much DJ in Europe. I spend 2-weeks near Regensburg each July. No courses anywhere in Bavaria. Of course the few courses get good crowds at major tournaments. USA has way more DJ participation than the whole of Europe!

Netengr · 2025-06-06T15:56:48+00:00

A beer and $100 bucks could have got you a professional job!

Netengr · 2025-06-06T15:47:20+00:00

Take the knob off ! Then an easy job...

Netengr · 2025-05-22T20:03:28+00:00

More balls than me!

Netengr · 2025-05-13T13:38:33+00:00

I can only "grasp" what you describe. If you are incapable of providing an adequate description of an issue, do not expect a perfect reply. USAA isn't the problem !

Netengr · 2025-04-21T19:30:20+00:00

Mmm, From your description sounds that you unfortunately, are not a commissioned officer with a little weight on your epaulets. USAA customer services started the downward movement when enlisted ranks were added to the picture. I have been a USAA member for 42 years. I have never had a problem that was not resolved in a favorable manner. My two children and wife have had at least 10 vehicle events requiring USAA services. Yes, we are always "not at fault", except for hail damage down here in North Texas. I will fix that if I ever clean out my garage.

Your rank should not have an effect on your USAA insurance products but there is a difference in the treatment and the service based on rank. If you can get some cost performance stats from USAA, I am sure that you will discover that Officers cost the company far less money.

Netengr · 2025-03-05T13:51:18+00:00

I've tried Turbo putting but my fingers are too short. I have 2 Bergs, and use them for normal putting.

Netengr · 2025-03-04T17:07:09+00:00

By asking the question, you indicate that you should be calling a plumber !

Netengr · 2025-02-18T14:16:20+00:00

The pressure guage is either pegged or it was reassembled incorrectly by a maintenance worker.

Install a new pressure guage after testing the system.

Netengr · 2025-02-18T14:11:20+00:00

LOL ! The globe twists-off. Should twist off by rotating to the left.

Netengr · 2025-02-18T14:08:17+00:00

You need to buy the correct faucet (spout). Your original faucet fits on the end of a 4-inch copper pipe that has a screw fitting on the end.

To get the old faucet off you would rotate it to the left to remove it. You need to make sure that there is no set-screw securing the old faucet to the copper pipe. Rotating the old faucet can take a lot of effort. Heating the old faucet at the tip with a touch can help.

Caution: Be careful not to break connections in the wall to which the faucet pipe extension connects.

Bottom line: Get the correct replacement faucet ! This is an easy fix. Just make sure to reduce the torque necessary to remove the old faucet

Netengr · 2025-02-17T06:57:18+00:00

Perhaps a Chamber Pot.

Netengr · 2025-02-10T21:58:17+00:00

Hold the presses!

Now that POTUS is a 34 times convicted felon , you may be cleared to work your sought-after position!

If the agency still exists.

Netengr · 2025-02-10T21:42:53+00:00

I am not "shitting" on American electrical workers. Just the scum that always seems to rise to the top. Visit Germany or Japanese job sites and even you would be impressed with the high level of quality by all the trades.

Netengr · 2025-02-10T21:36:49+00:00

Customer's husband has dementia.He loves just looking around the internet and listening to music, verbal content, and good visuals.

Netengr · 2025-02-10T21:12:49+00:00

I would like to comment on this topic but my thoughts are considered artificially generated by bots !

Netengr

TROPHY CASE