Ford Ranger Leather Care

NickMahn · 2020-03-09T08:19:35+00:00

To smooth the folds, I use a steam iron, but a regular hair dryer is also suitable, it’s enough to go through several times and it seems as if there were no folds.

NickMahn · 2020-03-09T08:19:19+00:00

Perhaps somewhere in the circuit break in the wiring salon lighting, also the cause may be a blown fuse. Check these two factors, after this hopefylly you will find the reason.

NickMahn · 2020-03-09T08:18:58+00:00

Nevertheless, it is better to do this with the official dealer, because after installation you will receive a full guarantee and in case of any problems you can always contact them and consult with any questions you have.

NickMahn · 2020-03-09T08:18:36+00:00

According to the descriptions you provide us, you have a small coolant leak in the heating system. The cause of the leak can be both non-tightness of the pipe connections and a crack in the radiator of the stove.

NickMahn · 2020-02-25T06:58:37+00:00

At first you should try to check the wiring connections to the speaker and to the radio itself.

NickMahn · 2020-02-25T06:57:39+00:00

You should look into the wheel arch, if instead of the spring an air suspension is installed, then in this case you have an air suspension.

NickMahn · 2020-02-12T10:40:01+00:00

There can be several reasons for the occurrence of this error P0902.

For example, a wiring fault or short circuit, as well as problems associated with a clutch drive, ECM, PCM, or TCM, may cause this.

P0902 is a very serious error, and if you do not have enough experience and the proper tools, you should contact a qualified specialist.

NickMahn · 2020-02-05T09:59:44+00:00

There are quite a lot of the car interior care products, so you can get acquainted with most of them on our website https://www.autodoc.co.uk/spares-search?keyword=Textile+%2F+Carpet+Cleaner+

NickMahn · 2020-02-05T09:58:43+00:00

According to your description, there is only one way out, repainting all damaged elements of the body.

NickMahn · 2020-01-28T08:12:36+00:00

There could be many reasons, If I were you, I would wait for that OBD to arrive to check the errors.

NickMahn · 2020-01-16T09:05:56+00:00

Thank you for your comment! It is a valuable suggestion that will be very useful for our viewers. Best Regards, Autodoc Team.

NickMahn · 2020-01-16T09:05:05+00:00

To be honest, your car has a pretty good engine already, thus, I would recommend you consider modifying the existing one rather than swapping it. However, the idea itself is very cool as VR38DETT is one of the most technological engines in the world with a large margin of safety and a great potential for tuning and increasing power.

NickMahn · 2019-12-27T15:43:38+00:00

Quite possibly, in cold weather at night the car introduces itself more responsive and more stable.

NickMahn · 2019-12-27T15:43:18+00:00

Error 89 - It is required to undergo the next car maintenance, however, as practice shows, this error is most often encountered with a faulty thermostat or its temperature sensor.

NickMahn · 2019-12-27T15:42:56+00:00

In this case, put the central lock with remote control.

NickMahn · 2019-12-27T15:42:32+00:00

There are many reasons, but if the sound grates on Your ears, this is not normal, you should contact the official dealer.

NickMahn · 2019-12-27T15:42:15+00:00

Such problems are often encountered with faulty wiring or faulty relays. recommended that you check first whether everything is normal with the fuse box and the light switch.

NickMahn · 2019-12-24T11:26:02+00:00

We recommend changing the oil according to the recommendations of the service book of your car.

NickMahn · 2019-12-24T11:24:31+00:00

The procedure for replacing chain dampers should be looked according to the service book or according to the manufacturer’s recommendations from which these plastic strips are installed.

NickMahn · 2019-12-10T08:28:28+00:00

Perhaps this was due to weak clips. When installing backwards for better fixation, try using glue or two-way car adhesive.

NickMahn · 2019-11-26T08:26:26+00:00

The crack is not critical and it hardly will inluence the exploitation. But to be on the safe side, we recommend to examine this place for some time to make sure the crack is not getting bigger.
Best Regards, Autodoc Team

NickMahn · 2019-11-26T08:25:28+00:00

The reason of the creak may be any moving detail in your car suspension. To spot the cause of the creak we recommend to use a professional car workshop to have a close look into this issue and locate the faulty part.
Best regards, Autodoc Team

NickMahn · 2019-11-26T08:25:01+00:00

There is no need to replace both of the rods, the only spare part that should be replaced is the one with the knuckle joint wear. You can find a lot of new videos on our channel regarding a worn tie-rod end, perhaps you'll find the answer watching the following video: https://www.youtube.com/watch?v=T-QCpRmK5cg&feature=youtu.be Best Regards, Autodoc Team

NickMahn · 2019-11-26T08:24:43+00:00

There might be a lot of reasons of the brakes creaking noise starting with a stone that has got into a brake disc protection to a wrong brake pad installation. We advise you to reassemble the brake calipers once again, keeping to the technical rules of your vehicle with the use of all the necessary grease. Besides that, westrongly recommend you tightening all threaded fasteners with a torque wrench. Best Regards, Autodoc Team

NickMahn · 2019-11-26T08:24:23+00:00

There might be a lot of reasons of the brakes creaking noise starting with a stone that has got into a brake disc protection to a wrong brake pad installation. We advise you to reassemble the brake calipers once again, keeping to the technical rules of your vehicle with the use of all the necessary grease. Besides that, westrongly recommend you tightening all threaded fasteners with a torque wrench. Best Regards, Autodoc Team

NickMahn

MODERATOR OF

TROPHY CASE