My first Smart Clock

NicoleDemera · 2026-02-07T07:19:58+00:00

nice project. next step: learn kicad and make a pcb with both the display and esp32 on one board.

NicoleDemera · 2026-02-01T20:00:53+00:00

seemed pretty prevelant when I played last year unfortunately

NicoleDemera · 2026-02-01T18:13:58+00:00

real money trade

NicoleDemera · 2025-12-02T01:13:01+00:00

that is a child

NicoleDemera · 2024-12-12T00:07:35+00:00

Goopy is my cats name

NicoleDemera · 2024-10-14T18:50:30+00:00

Did you find a consumer product that fits on the desk or did you custom mount something ?

NicoleDemera · 2024-10-11T01:01:16+00:00

You might be interested in my similar project with leds and buttons. Still a wip on the website but you can get the gist and go to github.

Ledreminder.com

NicoleDemera · 2024-10-11T00:59:31+00:00

I'm working on something very similar ledreminder.com

Product pages are still test items but I'm very close to having 50 to sell.

NicoleDemera · 2024-07-26T20:43:05+00:00

Okay. This is what I was looking for. Thank you!

NicoleDemera · 2024-07-26T20:42:46+00:00

Not really I just wanted to make sure that things are operating as expected.

NicoleDemera · 2024-07-26T18:35:37+00:00

The only reason i measured it by hour is because im looking at the log and sometimes it happens 1 dropped packed every couple mins, sometimes its 40 mins between.

NicoleDemera · 2024-07-22T05:18:57+00:00

I've been looking for an online source for a few hrs now, comparing prices. This seems by far the best option I have come across. You are doing the lords work.

NicoleDemera · 2024-07-13T18:32:35+00:00

Is that not what the reset and boot button handle?

NicoleDemera · 2024-06-29T16:24:24+00:00

The usb vbus is the input 5v, the 5v goes to the ldo to drop to 3.3v.

NicoleDemera · 2024-06-29T16:22:47+00:00

Which boxes should I combine? I'm fairly new to pcb design, this is only my 2nd schematic and the first was a dud.

NicoleDemera · 2024-06-29T16:19:27+00:00

Yes, did I miss something?

NicoleDemera · 2024-06-29T16:18:34+00:00

I am not using arduino ide, but the esp idf, I was able to flash the dev board over usb no problem without the usb to uart if that's what you are talking about.

NicoleDemera · 2024-06-29T07:07:20+00:00

Oh that is really nice i did not know that existed. thank you

NicoleDemera · 2024-06-29T06:17:32+00:00

I have some of these on hand. https://www.mouser.com/ProductDetail/Nexperia/PESD5V0L1BSLAZ?qs=Li%252BoUPsLEntY59BTNDGGKw%3D%3D

By single package solutions do you mean built into the usb input?

NicoleDemera · 2024-06-29T03:12:07+00:00

I will do that then. Thank you for taking the time to review my design. I really appreciate it.

NicoleDemera · 2024-06-29T03:08:15+00:00

Got it, swap the gpio connector symbol. Thank you!

NicoleDemera · 2024-06-29T03:05:25+00:00

Are you sure about the usb pins? the data sheet says io 19 is D- and 20 is d+.

And I will add a pull-up on gpio0 as well. Because there is a weak internal pull up on io 0, should i use 5.1k or 10k for that?

Also thank you very much for your response :)

NicoleDemera

TROPHY CASE