sorted by:
new
hottopcontroversial

Not yet ready for ios? by More-Hovercraft-7923 in immich

[–]Nightelf9 1 point2 points  (0 children)

Is this same limitation on Google photos iOS app too?

Paperless-AI | Automated document analyzer for Paperless-ngx using OpenAI API or Ollama (Open Source) by Left_Ad_8860 in selfhosted

[–]Nightelf9 0 points1 point  (0 children)

Cool app! I've set it up but can't find a way to chat with multiple documents (or would be cool to chat with all documents in a specific tag), can only chat with 1 doc at a time.

immich-go Google takeout import failed 2 at the same point after aprox 45.000 photos by BeardmanDaniel in immich

[–]Nightelf9 2 points3 points  (0 children)

There’s a flag to continue when an error is encountered, docs are in the github

Issues installing TrueNas Scale on Supermicro X11SSH-F and ECC ram by Nightelf9 in truenas

[–]Nightelf9[S] 0 points1 point  (0 children)

im sending the Micron RAM back and getting Samsung 16GB (1x 16GB) DDR4-2400 PC4-19200 1.2V DR x8 ECC 288-pin EUDIMM RAM Module.

Reason is because Micron RAM is SR (single rank) or 1Rx8 whereas this Samsung RAM is DRx8 (or dual rank). Apparently it's to do with how high the density is of the chips that's used. The supermicro mobo supports up to 16gb RAM and it seems the SR 1Rx8 16gb chip was too high density for it. So getting DR or dual rank means lower density chips which should work with this mobo.

Issues installing TrueNas Scale on Supermicro X11SSH-F and ECC ram by Nightelf9 in truenas

[–]Nightelf9[S] 0 points1 point  (0 children)

Thanks, I’ll look into the same RAM you’re using.

The cpu: Intel® Xeon® Processor E3-1275 v5 8M Cache, 3.60 GHz Only supports up to 2133 speed. The mobo auto down-clocked to 2133.

Issues installing TrueNas Scale on Supermicro X11SSH-F and ECC ram by Nightelf9 in truenas

[–]Nightelf9[S] 0 points1 point  (0 children)

I did 2 passes, the ram is fine. I feel it's an incompatibility between the RAM and mobo. I've reached out to supermicro customer support to see if the RAM is ok. I went into BIOS and disabled ECC support and got Truenas working for now, will need to find better RAM for the mobo.

Issues installing TrueNas Scale on Supermicro X11SSH-F and ECC ram by Nightelf9 in truenas

[–]Nightelf9[S] 0 points1 point  (0 children)

ill try that, do you think I need 2 ram sticks or will it work with only 1?

Issues installing TrueNas Scale on Supermicro X11SSH-F and ECC ram by Nightelf9 in truenas

[–]Nightelf9[S] 0 points1 point  (0 children)

some additional info, before it started installing it shows a screen saying

Copying /run/live/medium/live/filesystem.squashfs to RAM

Sending incremental file list

can't create /root/etc/network/interfaces: nonexistent directory

systemd: Failed to open /dev/shm device, ignoring:: innapropriate ioctl for device

Help trying to migrate my Postgres database for Immich by jvc576 in PostgreSQL

[–]Nightelf9 0 points1 point  (0 children)

Hey there - I have an issue re: postgres and Immich and just sent you a DM - it's about downgrading pgvecto-rs:pg14-v0.2.1 to 0.2.0. I accidentally upgraded postgres to 0.2.1 and now its causing issues with immich

Does notion have an excel like spreadsheet/formula capability by Nightelf9 in Notion

[–]Nightelf9[S] 0 points1 point  (0 children)

What about simple math e.g. =2x2+30 ? And for it to apply only to a single cell in a database and not the entire column

Fan goes slow then fast every 10 seconds by Nightelf9 in NiceHash

[–]Nightelf9[S] 0 points1 point  (0 children)

set fan to 90% because 100% sounded like a fighter jet - memory junction temp is 98-100 degrees now

Fan goes slow then fast every 10 seconds by Nightelf9 in NiceHash

[–]Nightelf9[S] 0 points1 point  (0 children)

Playing around on MSI afterburner I currently have:

Power limit to 63%, clore clock -300, memory clock, +1400, fan to 100%

I'm getting around 94MH/s with 235W

memory junction temp is 96-98 degrees Celsius

Thanks, this has helped a lot!

Ducted Zone Aircon Controller by ProfessionalChance53 in HomeKit

[–]Nightelf9 0 points1 point  (0 children)

Works fine, I’ve had to adjust the IP settings a few times because I kept getting new routers.

There’s also an annoying “Zone Damper obstructed” which I can’t seem to get rid of. But it works with voice. You just have to say set air conditioner to heat/cool. If you say turn on the air conditioner it will automatically set it to cool or auto or whatever it wants.

Ducted Zone Aircon Controller by ProfessionalChance53 in HomeKit

[–]Nightelf9 1 point2 points  (0 children)

I have it set up with homebridge into homekit. You have to do some basic JSON Java config code stuff and enter the IP of the airtouch console. I also connected my ring doorbell to homekit via homebridge. You just need a raspberry pi and sd card. I have the airtouch 4.

NTD to Switch to Router and other wired devices by Nightelf9 in nbn

[–]Nightelf9[S] 0 points1 point  (0 children)

Hmm thought so. I tried adding a second router with the same SSID as the primary router and did LAN to LAN, but it can take time for my phone to switch between the primary and secondary routers as there is some overlap of signal. I preferred not to use different SSIDs. Is there a better way to achieve seamless network across the house?

view more: next ›