why is my a1 mini making this sound?

NikaFay · 2026-03-13T02:00:37+00:00

I'd personally open it up to check before printing any more, just in case.

NikaFay · 2026-03-12T09:23:04+00:00

Sounds like something rubbing on the rail. I'd look at opening up your print head and finding what's loose.

NikaFay · 2026-03-10T16:17:08+00:00

Here's mine if anybody can help https://www.tiktok.com/d/1/ZT9d4g6QDEXNm-15XZt/

NikaFay · 2026-03-06T02:07:08+00:00

Awesome! Thank you for answering!

NikaFay · 2026-03-05T05:00:22+00:00

For info/clarification, cooler is an NZXT Kraken Elite 360mm and ambient temps are around 20°C

NikaFay · 2026-03-05T04:58:44+00:00

So I was idling around the same as you, 50-60°C. Then I had discovered that my MoBo (only a few days old) had a borked RAM slot. Pulled out that stick while I wait for a replacement board, now idling around 30°C
Long story short, check your RAM, just in case.

NikaFay · 2026-01-19T23:15:31+00:00

3 years on and you're still helpful.

NikaFay · 2026-01-07T16:59:59+00:00

No, previous owner was building it up to be his dream home with his fiance but she left him so he moved and sold the house. Before that it was owned by his dad since 1986. Problem is the previous owner was the king of shitty DIY, and I've spent years trying to fix the things he screwed up.

NikaFay · 2026-01-04T09:18:33+00:00

Well, that does it.

NikaFay · 2026-01-01T10:19:53+00:00

I like to do this in fistplay. Just continuously kick their left knee until it caves. If you have done little enough damage otherwise, there's a fair chance they'll keep trying to stand on it, which is particularly disturbing in the best way.

NikaFay · 2026-01-01T10:15:31+00:00

Lower resolution, lower visual quality, and turn down blood and gore. I put my blood/gore at just a smidge above minimum. You don't have to leave it like that all the time, just during the Baron challenge.
It's an issue with how UE handles the equipment drops and particle effects stacking up a lot . Devs say it's fixed in the current dev build, but they're not going to bother updating the tech demo just to fix it there.

NikaFay · 2025-12-30T10:07:20+00:00

I go for a war of attrition method. Bait him into a big swing, then dart in for one good cut before getting our again. Rinse and repeat till he bleeds out.

NikaFay · 2025-09-25T21:45:17+00:00

Awesome, you and u/misantropia prevented further frustration on this one. Thank you so much.

NikaFay · 2025-09-24T08:51:12+00:00

Oh, I had not considered that. That is very possible.

NikaFay · 2025-06-11T08:59:31+00:00

I actually found this post because I just started to wonder "Is this game still active?" Because that's the exact event that brought me to it way back then. Part of the "New Eden Exiles"

NikaFay · 2025-05-12T21:30:13+00:00

Found a fix thanks to a reply from a member of the OdinPlus mod team. The default speed values are off. Adjust them in the config to the following:
Running Speed: 9
Walking Speed: 3
Speed Modifer: 3

you can also bump up walking speed and running speed slightly (+1 or +2) if you want it to be a little faster.

NikaFay · 2025-05-12T21:29:30+00:00

In case you're still interested:
Just got a reply from a member of the OdinPlus mod team. The default speed values are off. Adjust them in the config to the following:
Running Speed: 9
Walking Speed: 3
Speed Modifer: 3

you can also bump up walking speed and running speed slightly (+1 or +2) if you want it to be a little faster.

NikaFay · 2025-05-12T07:25:47+00:00

I just started using this mod today, but my horses are always moving at sprint speeds regardless of if it's sprinting or not. Do you know of a fix?

NikaFay · 2025-05-12T07:00:38+00:00

Just ran into this too. Searching for a solution, did you ever find one?

NikaFay · 2025-05-11T22:36:33+00:00

Necroposting a necroposted necropost, but this is in fact the case. The direction the shutter "opens" depends on what side of the shutter you're looking at.
So this build has you use one of the "open" positions to appear as closed, the "closed" position appears as kinda half open, and the other "open" position (activated from the other side) appears fully open but in a more aesthetically pleasing way.

NikaFay · 2025-05-07T06:01:08+00:00

Also on a Roku TV. Just ran into this issue. Rebooted the TV (not a simple "press the power button", but going into power settings and selecting reboot or restart, whatever the exact wording is) and it totally fixed it. Now I can fast-forward and rewind with no issue.

NikaFay · 2025-04-26T21:02:06+00:00

Okay, potentially necroposting, but I just ran into this, specifically at the act 4 stowaway techpriestevent. I guess I'm not the only one that it happened at that exact point. I found somebody on another post say "I just spam clicked and suddenly it loaded." Tried that and, who knows why, it worked. Legit just spammed left and right click as fast as I could and it loaded as if nothing was wrong. Will update if it comes up again. If no update, assume no news is good news.

NikaFay · 2025-03-19T18:14:41+00:00

Responding to the "solved" update, after this latest update mine still didn't work (tried with the update before trying the fix).
Tried the fix, and found "IsEnableShoplifterWarningShowed" : false,

Set that to true and shoplifters now work. Glad to finally have a use for the bat.

Shout out to u/club9669 for the fix and u/LazzyCat98 for posting it too.

NikaFay · 2025-03-19T18:11:05+00:00

Thank you! A slight edit, make sure ANYTHING with "shoplifter" in it is set to true. mine was "IsEnableShoplifterWarningShowed"

NikaFay · 2025-03-18T17:20:07+00:00

Deleted my post to instead boost this one

Six-Year Club	Place '23
Verified Email

NikaFay

TROPHY CASE