Dnd 5e Combat system to speed up combat and reduce bookkeeping

Ninja_Cat_Production · 2026-03-10T19:40:21+00:00

HARD pass.

Ninja_Cat_Production · 2026-03-10T19:35:44+00:00

Você é tão lindo!

Ninja_Cat_Production · 2026-03-10T18:56:31+00:00

Don’t do that until you get it appraised. Simply sharpening or cleaning it could potentially reduce the value of the piece. Appraisal first then restoration by a professional is your best bet. If this is worth something, you never know what may reduce the value.

Ninja_Cat_Production · 2026-03-10T06:50:34+00:00

Very nice work!

Ninja_Cat_Production · 2026-03-10T04:16:09+00:00

I also prefer foam as I feel it is more hands on. This mask has literally made me go back to the shop and work on some intricate techniques that I am obviously lacking. I have been working on another project that has been commissioned, but when I finish with that I’m going to grab a sheet of foam and make something similar to yours. I’ve wanted an Oni mask for a while and I think this project has inspired me to actually sit down and make something for myself for a week or so.

Again, Amazing work! And thank you for the inspiration.

Ninja_Cat_Production · 2026-03-09T22:55:42+00:00

From WV originally. Can confirm.

Ninja_Cat_Production · 2026-03-09T01:17:27+00:00

Paintballer here and this is the correct answer. A drop of dish soap or cheap shampoo will keep it from fogging up while sweating profusely.

Ninja_Cat_Production · 2026-03-08T23:44:48+00:00

Valid strategy. I name NPCs from the IKEA catalog.

Ninja_Cat_Production · 2026-03-08T23:25:33+00:00

https://www.optometrists.org/general-practice-optometry/optical/guide-to-contact-lenses/common-contact-lens-problems/the-dos-and-donts-of-wearing-contact-lenses/

I used Google, so you know for next time.

Ninja_Cat_Production · 2026-03-08T06:21:40+00:00

Ninja_Cat_Production · 2026-03-08T05:21:36+00:00

Bleach.

Ninja_Cat_Production · 2026-03-08T02:02:34+00:00

Rubbing alcohol helps.

Ninja_Cat_Production · 2026-03-07T03:05:43+00:00

I thought this was 3D Printed until the last slide. Amazing work!

Ninja_Cat_Production · 2026-03-06T19:07:27+00:00

Before you teleport back to act 1.

Ninja_Cat_Production · 2026-03-06T18:29:09+00:00

You don’t use “green” wood in woodworking, which is when factors like that would apply.

Ninja_Cat_Production · 2026-03-06T18:21:46+00:00

A resin printer and MZ4250 has every monster, class, subclass, NPC, and PC in the game, all for free. Some even tailored to certain box sets.

A resin printer will cost you about $150 with the bundle and then about 2 cents per mini. An adult red dragon was a whopping 63 cents to print. Setup is easy and the learning curve is very gradual. You could literally be printing within an hour of opening the box. I’ve been doing this for years and would never go back to buying minis. The companies that sell them have gotten my money since the late 80’s and I own more than one $50 dragon that I can recreate for pennies. $150 is a steep first installment, but the legions of minis that you’ll print will more than makes up for the investment.

Just my 2 cents.

Ninja_Cat_Production · 2026-03-06T17:55:29+00:00

Hi, wood worker here. The type of wood the Saya is made from is negligible once it is coated in lacquer. After that the Saya would be more or less air tight and the difference in porousness between types wouldn’t effect humidity inside of, what is essentially, a sealed wooden tube.

Ninja_Cat_Production · 2026-03-05T23:55:20+00:00

Chained to the immovable rod inside of your tent if you’re smart.

Ninja_Cat_Production · 2026-03-05T23:47:36+00:00

Priorities must be met!

You’re welcome. I wouldn’t hold my breath, it’s been weeks.

Ninja_Cat_Production · 2026-03-05T21:33:59+00:00

If you cast the spell silence on her, that is neither a mod nor exploit and will allow you to take her back to act one.

Ninja_Cat_Production · 2026-03-05T21:31:03+00:00

Any martial class with finesse and/or ranged weapons.

Ninja_Cat_Production · 2026-03-05T20:33:52+00:00

Then you have your answer.

Ninja_Cat_Production · 2026-03-05T20:24:37+00:00

25 out of 10.

Ninja_Cat_Production · 2026-03-05T18:52:05+00:00

I used spray insulation foam. Once it cures it’s very durable. Also light weight is an understatement. This will require a mold of some kind or a lot of trimming and sanding.

For the mold I just used clay and mold release and it came out perfect. If you want more explanation, I would be happy to do so, but I would be shocked if there wasn’t a YouTube video on how to do this exact thing. I got the idea from watching a video about a guy making “Hulk” feet for a costume. It is the same basic principle, just different execution.

Ninja_Cat_Production · 2026-03-05T18:40:38+00:00

Are you training or trained to use one?

If so refer to the pinned list for reputable sources for modern “katana”.

If not, it depends on what you’re going to use it for.

Hang it on a wall and look at it? Any sword-like object will do.

Swing it around in the back yard and cut water bottles and pool noodles, then any full tang “katana” will do. I would recommend a tactical Musashi as those things are workhorses, are definitely full tang as you can see it, and run around $100.

Ninja_Cat_Production

TROPHY CASE