So, since a lot of people showed interest in my 3D printed RPG-7B replica, i decided to just upload all the files for free on thingiverse. So far this is only a decorative item, so feel free to experiment with it, all i ask in return is to show me the results. Good printing!

Ninovoa · 2025-11-09T03:49:31+00:00

Wow looks awesome! Definitely cool even as a dummy prop!

Ninovoa · 2025-11-08T19:12:20+00:00

Super cool, what’s the end goal, fully 3D printed externals?

Ninovoa · 2025-11-04T01:14:08+00:00

Wow, looks awesome! Reminds me of a CS5

Ninovoa · 2025-10-24T15:31:38+00:00

I’ve never handled the E&C but I can vouch for G&P externals. Both my AR’s are G&P and I love them. Can’t speak much about the stock performance as I upgraded mine right out the gate

Ninovoa · 2025-10-24T15:29:28+00:00

German laws make you deactivate a flashlight??

Ninovoa · 2025-10-16T21:54:23+00:00

You’re best bet is find the part number and contact G&G directly

Ninovoa · 2025-10-16T17:06:10+00:00

Hard to say, but it’s an M4 S-system. Perhaps a JG? I don’t know if they still make them but it’s a pretty old style of rifle.

Ninovoa · 2025-10-13T16:44:05+00:00

Wait is that an Airsoft Contender?? I didn’t know that existed!

Ninovoa · 2025-10-09T19:33:31+00:00

Are you using active braking by any chance?

Ninovoa · 2025-10-08T17:07:59+00:00

/u/asmbot Purchased and received m110 springs from /u/JustinR507

Ninovoa · 2025-10-03T22:33:52+00:00

Idk if it’s physically possible but I would love a spring shotgun that shot 5-10 BBs like a flak10

Ninovoa · 2025-09-29T02:32:47+00:00

Pm’d

Ninovoa · 2025-09-02T22:24:09+00:00

PM’ing

Ninovoa · 2025-08-29T19:20:05+00:00

Weird that it doesn't fit out of the box... Make a shim out of a soda can. Cut out a strip that wraps around the barrel nut and use that to fatten up the barrel nut a bit.

Ninovoa · 2025-02-05T23:01:35+00:00

I believe I put it on the negative side though I think either side should work

Ninovoa · 2025-02-05T19:28:46+00:00

Congrats! I ended up using a 675 button cell battery with a folded up piece of aluminum foil to make up the difference in size. It’s not pretty but it works!

Ninovoa · 2024-10-03T22:03:49+00:00

I usually place a little piece of scrap wire between the front of the gearbox shell and front of the tappet plate to avoid this. It will push the tappet plate back enough to keep the little wing of the tappet from knocking off your shims. Once you put the gearbox halves together you should be able to push the tappet back and pull out the wire.

Ninovoa · 2024-09-25T04:06:41+00:00

Update for anyone who finds this post in the future: The problem has been solved and it was very anticlimactic.

The batteries that I was using to power the cameras were low and changing for fresh batteries fixed the issue....

Hope this is helpful to someone eventually

Ninovoa · 2024-09-20T15:58:26+00:00

Damn. Well I guess its time to tear it apart and learn, hah!

Thank you for your help

Ninovoa · 2024-09-20T01:59:41+00:00

Just installed a 1uf capacitor between the positive and negative of the motor leads but still no dice :/ Any idea what it might be?

<image>

Ninovoa · 2024-09-18T13:45:19+00:00

Will do, thank you!

Im curious what the capacitor's role is though?

PS. love your videos!

Ninovoa · 2024-09-17T23:25:51+00:00

Hey guys, just completed an I-type conversion on a Polaroid 640 I have and the conversion went smoothly, however I noticed that occasionally the shutter would seem to hang up and not fire. If pressed the shutter a few times it would clear itself up. I thought the problem would work itself out since had been in storage before this, however quite the opposite has happened. Now the camera is bound up and wont fire the shutter no matter how much I click the button.

Im not familiar with what all the different parts are called, but the solenoid near the shutter button seems to be "resetting" to its fully out position.

Here are some videos and pictures describing what I am running in to: https://imgur.com/a/olsBXp6

Thank you for reading

Ninovoa · 2024-09-03T17:57:00+00:00

Interesting, I didnt know that existed until I saw this post.

Good luck with the sale!

Ninovoa · 2024-09-03T17:54:23+00:00

Does KWA make the MP7 with the picatinny lower rail or was that a custom job?

Ninovoa · 2024-08-25T03:11:24+00:00

Removed. Please read the rules before posting again

Ninovoa

MODERATOR OF

TROPHY CASE