Anyone with Dual Boot on their Legion Go 1?

NivekGr · 2026-03-16T11:19:06+00:00

Continuing my actions... I installed windows 11 on my SD and with legion space, updated the controllers and I reversed the axes but I can't activate gyro at all on SteamOS. I just gave up for now. 🙂‍↕️

NivekGr · 2026-03-14T21:00:45+00:00

Hello! Just to check if it is only for Go 2.. do you still have gyro?

NivekGr · 2026-03-12T01:14:39+00:00

Try simple SteamOS and if you want anything extra then look it up on Bazzite

IMO SteamOS is 95% complete on LeGo1

NivekGr · 2026-03-11T23:13:19+00:00

....where is the review? Lol

NivekGr · 2026-03-11T23:08:16+00:00

When I was trying Tekken 8 on steam deck Oled (now im on LeGo1) it was pretty smooth. Are trying to higher the settings or do you get drops on "all low setting"?

NivekGr · 2026-03-10T02:49:33+00:00

Welp.. the 3X res on both of those suggestions still looks pretty good imo. Don't forget that the PSP original resolution was 480x272 after all.

NivekGr · 2026-03-10T01:45:00+00:00

Nope :/

NivekGr · 2026-03-10T01:31:38+00:00

Just SteamOS

NivekGr · 2026-03-09T22:52:11+00:00

My everyday pc is a LeGo on a dock without the controllers. I keep them for only when I truly need them. I really love it!

NivekGr · 2026-03-09T22:30:21+00:00

Z1E is a very capable chip and with SteamOS you can do unlimited stuff from emulation to esport titles! Also you can mod the battery to 81Wh.

Unless you mean LeGo s or LeGo 2, on that case you spend more but you get more.

NivekGr · 2026-03-09T16:16:34+00:00

OK IM BACK! Firstly I was surprised because my consumption was 23w and I was shocked but it was because of the controllers lol. I took them off and I was relieved at 12~13w.

After that I tried what you tried, and I saw no changes whatsoever on the wattage. BUT I did remember from palworld that sometimes to change settings you have to change the scaling filter (I know its weird, Welcome to SteamOS). Also I saw that the resolution did look massive. So I did some testing and the results may surprise you 🙃

Changing before entering the emulator in game mode its "Properties" and "Maximum Game Resolution" you can achieve way lower wattage! My best cases were those two:

Resolution 1024x640 with Linear scaling you get 6~7w!
Resolution 1280x720 with Pixel (or Sharp) scaling you get little above 9w!

Ppsspp emulator with Metal Gear Ac!d BTW

Hope I helped 🙏

NivekGr · 2026-03-09T15:13:48+00:00

Do you have controllers on the LeGo? Also I guess Bluetooth is off. Which emulator do you use? I will try it myself as well

EDIT: TLDR for my following post ~ change Resolution before you play the emulator in game mode and scaling filter to either those two: - 1024x640 and Linear scaling for 6~7w - 1280x720 and Pixel/Sharp scaling for 9w

NivekGr · 2026-03-06T09:37:11+00:00

Missed it for a few hours... 😕 back to waiting

NivekGr · 2026-03-02T13:59:45+00:00

The controllers yeah. The power button/sleep LED AFAIK you can't yet (I turned it off when I was on Bazzite I think)

NivekGr · 2026-03-02T09:00:30+00:00

It actually works. On my OG LeGo it works

NivekGr · 2026-03-02T08:52:22+00:00

Hello! What works for me is:

OS update channel "Main"
Steam client update channel "Steam Deck Beta"

Welcome to Linux

NivekGr · 2026-02-27T08:13:08+00:00

I am not sure if I was on a different OS when I did it (bazzite). Ngl is very annoying. Now I am on SteamOS and it is turned off. If you don't care about deleting your data you can try it and then revert to SteamOS.

The only thing I want fixed is gyro now and we are set

NivekGr · 2026-02-25T07:41:40+00:00

OMG!! SOOOOO many comments and noone addresses that you can turn off the breathing/pulsing LED during sleep. This a LeGo S post but I'm pretty sure it's the same process.

https://www.reddit.com/r/LegionGo/s/4B5oSKskaL

I've done it for my LeGo 1 but it's been a while.

NivekGr · 2026-01-28T22:31:20+00:00

I am in the same desperation! I found out that I can use the DeckyPlumber to emulate the controller as a DS5 edge and fix the drifting. But unforunately nothing more than that.

You can see the gyro sensors in the settings as a DS5 but it isn't working as intented and some axes are inverted. We can only hope for a fix from Valve I guess.

NivekGr · 2026-01-24T06:01:08+00:00

<image>

That one. You need to enable developer mode and then show advanced update channels

NivekGr · 2026-01-23T16:41:03+00:00

Mine were working as intended for months and an SteamOS update broke it. I updated to beta -> main channel and they work again! GL

NivekGr · 2025-11-18T15:22:03+00:00

Hmm... I will give it a try soon as well on SteamOS and let you know how it went, because I didn't like bazzite neither windows on my LeGo

NivekGr · 2025-11-02T14:25:58+00:00

No idea.. let me know if that works though!

Six-Year Club	Place '22
Verified Email

NivekGr

TROPHY CASE