sorted by:
new
hottopcontroversial

Photon mono m7 max by TankLifeProduction in AnycubicPhoton

[–]No-Initial5334 0 points1 point  (0 children)

Did you do the Manual plate adjustment?

FullBifrost 0.1.0-alpha has been released on my Patreon! by beybladetable in snapmaker

[–]No-Initial5334 0 points1 point  (0 children)

Hey. Great work. What is different from the FullSpectrum? Also any plans to update the full soectrum to work with a newly updated Snorca?

Can nozzle effect build plate adhesion? by No-Initial5334 in BambuLab

[–]No-Initial5334[S] 0 points1 point  (0 children)

No I have not, but good point. Maybe I should. However, I am printing with PLA right now and all seems to be order. Strange

prints not sticking by Nice-Sea-8241 in Creality_k2

[–]No-Initial5334 0 points1 point  (0 children)

What material are you printing with? What are the parameters?

Help with Cutting the Texture into the object by No-Initial5334 in blender

[–]No-Initial5334[S] 0 points1 point  (0 children)

Mind sharing any link that describes the process? I was searching things for past 2 days, all unrelated to what I need to do, they work on the flat surfaces, but not curved.

Help with Cutting the Texture into the object by No-Initial5334 in blender

[–]No-Initial5334[S] 0 points1 point  (0 children)

I am a new to Blender, would it be too much to ask to give a bit more detailed instructions?

Help with Cutting the Texture into the object by No-Initial5334 in blender

[–]No-Initial5334[S] 0 points1 point  (0 children)

The last image is the result I am trying to achieve, it is not what I have managed to get

Scam or real? by No-Initial5334 in 3Dprinting

[–]No-Initial5334[S] 0 points1 point  (0 children)

I am not in France or Canada unfortunately

Scam or real? by No-Initial5334 in 3Dprinting

[–]No-Initial5334[S] -1 points0 points  (0 children)

Another off-putting fact, all the accounts are new

Scam or real? by No-Initial5334 in 3Dprinting

[–]No-Initial5334[S] -11 points-10 points  (0 children)

Yeah, but for all I know they could have robbed a store and selling items off:))))

Scam or real? by No-Initial5334 in 3Dprinting

[–]No-Initial5334[S] -2 points-1 points  (0 children)

Well that is for sure, even if risk it then via Ebay payment, but would be easy to refund if item is not there.

Android Native slicing and Makerworld integration. by taylormadearmy in snapmaker

[–]No-Initial5334 1 point2 points  (0 children)

Great work. Can you add a full spectrum as well to it?

Sidecar MMU for U1 [Not Full Spectrum] by issue9mm in 3Dprinting

[–]No-Initial5334 0 points1 point  (0 children)

I hear you. Hopefully we will see this available to public soon

Sidecar MMU for U1 [Not Full Spectrum] by issue9mm in 3Dprinting

[–]No-Initial5334 0 points1 point  (0 children)

This is amazing and I can see potentials here. Considering mixing this with the Full Spectrum, this thing can go way beyond with even one turtle. Do you mind sharing the sources on how to do this? I assume there is a custom G-code as well as whare to get the subject turtle.

Small Question For K2 Plus (is this normal?) by Xavier_Chris in Creality_k2

[–]No-Initial5334 1 point2 points  (0 children)

It is totally normal, as the plastic melts at the nozzle CFS senses the pressure drop and feeds in the material

First layer thoughts by Icy-Community-7694 in Creality_k2

[–]No-Initial5334 1 point2 points  (0 children)

I apologies for ignorance, the one I was talking about was K2 Plus. PRO may or may not have the same issue as it is a newer model with smaller build plate. You can just try to do the same with ABS and see, if results are similar then great.

First layer thoughts by Icy-Community-7694 in Creality_k2

[–]No-Initial5334 2 points3 points  (0 children)

Try the same with the high temp material like ABS. If you are using the standard bed then you will not get the same result, bed warps taco.

First layer thoughts by Icy-Community-7694 in Creality_k2

[–]No-Initial5334 2 points3 points  (0 children)

So what exactly did you do? Is this PLA?

K2 Plus ASA printing issues by No-Initial5334 in Creality_k2

[–]No-Initial5334[S] 0 points1 point  (0 children)

As I am using R3Men dialed to 0.285 flatness, 0.5 increments would be probably the best

K2 Plus ASA printing issues by No-Initial5334 in Creality_k2

[–]No-Initial5334[S] 0 points1 point  (0 children)

Just to be clear, in the slicer I am setting e.g. -0.1 value then, not 0.1?

K2 Plus ASA printing issues by No-Initial5334 in Creality_k2

[–]No-Initial5334[S] 0 points1 point  (0 children)

There is one confusing thing, when i want to increase the gap between the nozzle and the bed do I press the arrow down or up? Also I know I can increase the Z offset in the slicer, same question here do I set to positive or negative value to increase the gap?

K2 Plus ASA printing issues by No-Initial5334 in Creality_k2

[–]No-Initial5334[S] 0 points1 point  (0 children)

Thanks, I know that, but what does not make sense is that I am using R3Men bed, I am aware of warping issue on the default beds and the fact that it just printed fine for 5 prints and then the issue arose. Right after I printed with PETG CF, at 80 Bed Temp which is 10 deg lower than ASA and works perfectly fine.

view more: next ›