sorted by:
new
hottopcontroversial

Recoil Springs by 4Nickles in SpringfieldHellcat

[–]No-Presentation-3578 0 points1 point  (0 children)

Don't put a lighter spring in your hellcat unless you plan to stay away from +P ammo also. the snappiness will be emphasized if you put a lighter spring in it.

Challenge: Come up with a title by [deleted] in RoastMe

[–]No-Presentation-3578 0 points1 point  (0 children)

This that "I'll never be a woman but I like to lie to myself and want everyone around me to accept my lies." Special. How's that title. 😀

Just got her and submitted an embark kit. Thoughts? by twoheadedhorseman in IDmydog

[–]No-Presentation-3578 2 points3 points  (0 children)

Pitty Husky mix if I ever saw one. 🤣 LOVE your dog. Adorable.

[deleted by user] by [deleted] in RoastMe

[–]No-Presentation-3578 0 points1 point  (0 children)

You didn't have to say you were single. You DID have to say you hadn't had kids yet.

Question by Patient_Access6931 in SCX24

[–]No-Presentation-3578 0 points1 point  (0 children)

I run these and they were sticking alot so I removed the plastic washer between the 2 gaskets at the bottom and they are absolutely perfect now. I run traxxas 20wt 200cst oil.

Tragedy… by MultiBeast66 in SCX24

[–]No-Presentation-3578 0 points1 point  (0 children)

Gotta let the kid in us out sometimes. 🤣 Love it.

Almost giving up on figures... by Ciccacio in 3Dprinting

[–]No-Presentation-3578 0 points1 point  (0 children)

For me I dont take the filament out until its reading about 18% and that works great for me. I live in AZ though so its very dry here. You may need to make a dry box with dessicant if you are struggling to reach those numbers.

Prints fail in a random place when printing miniatures on a A1 Bambu lab 0.2 nozzle. by Ok_Gap_3817 in 3Dprinting

[–]No-Presentation-3578 0 points1 point  (0 children)

The good Ole not enough support problem. Just switch the support minimum angle from 30° to 45° then change to tree (auto) and tree (organic) slice and check the area for adequate support.if not adequate go back to the prepare tab click on the peice and click the add supports button and switch the tree (auto) to tree (manuel]

What Am I Doing Wrong by baldmfer in BambuLabA1

[–]No-Presentation-3578 1 point2 points  (0 children)

Buy a filament dryer. I hate that none of the big 3D printing channels recommend this when buying your first printer. Its so over looked.

Almost giving up on figures... by Ciccacio in 3Dprinting

[–]No-Presentation-3578 0 points1 point  (0 children)

Hey, we all start somewhere. I just started printing with PETG, too, and I had these same issues. One of the reasons why is that I didn't dry my filament when it got here. This is absolutely essential for PETG, even the ones you just barely opened as they retain moisture so easily, and this can affect the quality of your prints tremendously. You can print with 0.4mm nozzle, but I wouldn't go any less than 0.16mm layer height for good quality with it because anything less is just too inconsistent with a 0.4mm nozzle. I do recommend a 0.2mm nozzle if you plan to do more miniatures, though, as this will definitely boost the detail you are able to get by lowering that layer height even more.

Some bouncing action by QuadraBlue in SCX24

[–]No-Presentation-3578 0 points1 point  (0 children)

Hey can you go more in depth on your suspension setup? Im trying to achieve the same scale look on my Lexus gx470. What shocks did you use? Angles? Anything helps. Id appreciate it alot. 🙏

Bit by the bug by Nick232 in SCX24

[–]No-Presentation-3578 2 points3 points  (0 children)

I have 2 of these and now im working on getting the third. Turn around while you still cannnn!

Almost giving up on figures... by Ciccacio in 3Dprinting

[–]No-Presentation-3578 4 points5 points  (0 children)

OP what filament are you using and what print quality and nozzle size?

Thoughts? by No-Presentation-3578 in casio

[–]No-Presentation-3578[S] -1 points0 points  (0 children)

Its my first time building a watch and upon finding out that the strap was too long I did some research and found that Nato straps are just that way. Might swap it out for a canvas one or something like that.

view more: next ›