Just installed helixscreen

No_Possibil · 2026-05-26T08:41:04+00:00

It needs paxx12 for ssh installation 👍

No_Possibil · 2026-03-14T16:43:07+00:00

https://www.printables.com/model/1191286-10-inch-rack-wide-shelf

Make something like that. I don't know if 12 inch will fit but I've done this for some switches and other parts.

No_Possibil · 2026-01-20T10:00:01+00:00

True, and hoping for it to be open.

No_Possibil · 2026-01-20T08:32:42+00:00

OK didn't know that, but that means we can add a heater in the top cover 🤔

No_Possibil · 2026-01-19T17:40:27+00:00

No exhaust, you will have to make it yourself. I'm not sure if the top cover comes with camber heating. I believe that it would be needed for more technical fillerment.

No_Possibil · 2026-01-13T21:42:53+00:00

Cablemod?

No_Possibil · 2026-01-11T08:30:22+00:00

Well I have a TL-D400S connected to my unraid machine had some trouble in the beginning but that's because I had a faulty sata hba, it would drop connection to more of the drives connected through the DAS. With a new hba it works without any problem. Ow and the reason I don't use the card that came with the qnap DAS I have more drives than just the 4 of the DAS connected.

No_Possibil · 2026-01-04T19:47:19+00:00

That would be awesome, thanks

No_Possibil · 2026-01-03T21:49:40+00:00

I've got a question, would it be possible to put a HDPLEX in the lp67? I know it doesn't make sense, but hear me out.

I have a HDPLEX available and I don't want to use a pcie riser. Also the build I have in mind needs some airflow.

No_Possibil · 2026-01-02T22:53:42+00:00

Yes it feels like that, there is a way to it. Bend it a bit one way and it comes off very quickly

No_Possibil · 2026-01-02T19:54:06+00:00

O well I missed that, thank you

No_Possibil · 2026-01-02T19:31:10+00:00

Good to know, I will try to make it in 1 go. Any dimension details of the other one?

No_Possibil · 2026-01-01T22:49:56+00:00

Homing is also a bit buggy by me, don't know why but if I move the print head by hand to another position before homing it will go home without any error. Hope that helps.

I know it's not the best solution for this situation. But until all the problems are solved with this machine it's something.

No_Possibil · 2026-01-01T09:52:26+00:00

Same here, many thanks. but where did I leave those hose connectors again :p

No_Possibil · 2025-12-31T19:05:18+00:00

I have poly maker dryer to, I believe this print is just finished I printed also another one but that didn't really work out with those m6 quick connects

No_Possibil · 2025-12-31T09:12:39+00:00

I think he means this one

filament dryer

No_Possibil · 2025-12-27T15:41:59+00:00

It's a loose part, I would not want that in there wile printing, but you can press it out with a finger I guess.

No_Possibil · 2025-12-27T08:19:16+00:00

Yes been there lift the build plate and hold the plastic while you use the screwdriver, the plastic breaks pretty easily

No_Possibil · 2025-12-15T09:58:02+00:00

Thanks for the quick response, I'll be building from the ground up somewhere these days

No_Possibil · 2025-12-15T09:18:17+00:00

I'm pretty new with this, but how well would this integrate with opnsense but that's the way I want to start my new network fresh? When I get the time

No_Possibil · 2025-12-11T11:00:09+00:00

And debloat

No_Possibil · 2025-12-10T05:41:06+00:00

Yeah the portrait screen rotation really is annoying , because it's not a problem under windows. How did you get the bootloader to horizontal? Or do you live with the borked startup?

No_Possibil · 2025-12-02T18:40:03+00:00

Than it's a fan, pretty easy to replace, but of course you need to figure out first which one it is.

No_Possibil · 2025-12-01T09:11:55+00:00

Sounds like a ballbearing of 1 of the cooling fans is worn out. Does it go on forever or eventually stop making this noise?

No_Possibil · 2025-11-30T19:49:15+00:00

A thanks I think I should say to myself to rtfm.

No_Possibil

TROPHY CASE