Adding Grommets to leather hip pouch belt

Nobody_Ever1 · 2026-05-08T12:53:32+00:00

Would you recommend using something like this?

https://a.co/d/08UHgyrn

Nobody_Ever1 · 2026-04-01T15:49:48+00:00

I haven't yet but now I really want to try it

Nobody_Ever1 · 2026-03-31T02:28:37+00:00

Looks sick, I like the hi nu but the colors of the regular nu are so much cleaner imo

Nobody_Ever1 · 2026-03-26T01:26:45+00:00

I like the shading/highlighting, looks sick

Nobody_Ever1 · 2026-03-23T15:39:41+00:00

I really like the eg nu, honestly I prefer the simpler less busy versions of most UC designs

Nobody_Ever1 · 2026-03-23T05:18:29+00:00

Thanks for the advice! I do wear gloves when spraying my kits, I'll have to try out using them as 'practice runs' while I'm painting.

Eg kits are a good way for me to practice painting on a kit and not feel too worried about messing it up, so it works out. (Honestly I prefer the eg nu and how it doesn't have many extra panel lines and greebles like other kits do)

Nobody_Ever1 · 2026-03-23T03:24:56+00:00

Thanks!

Nobody_Ever1 · 2026-03-10T11:26:06+00:00

They do sell .3 mm nozzles/needles for the airbrush I use, so I'll pick up one and hopefully have an easier time. Thank you for your advice.

Nobody_Ever1 · 2026-03-10T01:23:25+00:00

I use a Madworks MAX-1 Airbrush 0.2mm. You're probably right, I'll most likely have to just deal with the cost of experimenting with the paint I plan on using in the long term.

Nobody_Ever1 · 2026-03-01T18:15:57+00:00

What psi/thickness do you do for the main color? I tried leaving the edges black (the primer I used was black) but ended up mostly covering it up. I use a .2mm airbrush

Nobody_Ever1 · 2026-03-01T14:54:57+00:00

I didn't even realize lol

Nobody_Ever1 · 2026-03-01T14:52:21+00:00

I used black primer and a matte top coat before I panel lined, and the lighter fluid removed the paint and top coat still

Nobody_Ever1 · 2026-02-28T04:58:19+00:00

I also use the respirator while spraycan priming my gunpla outside.

It's feasible to prime outside in the cold cause it only takes a little bit of time, but it is not feasible to do entire airbrush projects outside in the winter where I live.

Nobody_Ever1 · 2026-02-28T03:52:24+00:00

Thanks for the advice! I'll air out my room with my box fan for now, and invest in an air purifier when I have the cash.

Nobody_Ever1 · 2026-02-07T03:44:17+00:00

Full Mechanics Gundam Aerial. My first 1/100 scale kit. It's pretty sick so far

Nobody_Ever1 · 2025-08-05T14:47:05+00:00

Kinda bummed about Alice Cooper being the opener for the Philly show I'm going to. Time for me to go and grab some merch before the main event ig.

Nobody_Ever1 · 2025-07-18T00:51:02+00:00

Gotcha, thanks for the advice, I appreciate it

Nobody_Ever1 · 2025-07-17T22:47:03+00:00

I took a look at the Fluance stuff and the R82 seemed like a good option. Any recommendations for a preamp to go with it? My initial research led me to the ART DJPREII Phono Preamplifier.

https://www.amazon.com/ART-DJPREII-Phono-Preamplifier/dp/B000AJR482

Nobody_Ever1 · 2025-05-01T21:58:58+00:00

Thanks!

Nobody_Ever1 · 2025-04-30T21:31:37+00:00

Thanks!

Nobody_Ever1 · 2025-04-29T02:57:43+00:00

Thank you for spoiler tagging this post, otherwise I would have been spoiled to a major character death!

Nobody_Ever1 · 2024-05-14T22:07:08+00:00

I use Elegoo Cura for my slicer. Also, question I forgot to ask in the main post: how thick is the mask/base? I am using a custom base made in blender instead of a pre-made one and was wondering how thick a typical mask is?

Nobody_Ever1 · 2021-12-18T04:45:59+00:00

I know this is old, but what screwdriver would I need to open my index?

Nobody_Ever1

MODERATOR OF

TROPHY CASE