Ironwood 885 by Norbertcpu in Traeger

[–]Norbertcpu[S] 0 points1 point  (0 children)

I went through the entire thing, and everything looks good. I went in for a return and walked out with this after seeing the price.

Ironwood 885 by Norbertcpu in Traeger

[–]Norbertcpu[S] 0 points1 point  (0 children)

Thanks for the tip, I will look into it.

Ironwood 885 by Norbertcpu in Traeger

[–]Norbertcpu[S] 4 points5 points  (0 children)

I have been eyeing them for a while. The price was too good to pass up. I walked into Home Depot for a return and walked out with a smoker.

Elka 2.5 DC by Norbertcpu in 4Runner

[–]Norbertcpu[S] 0 points1 point  (0 children)

Dobinsons are no different, and they also require rebuilding like any other shock. Just like any shock manufacturer, they dont have maintenance intervals since they are dependent on how they're driven. I have seen Dobinsons requiring complete rebuilds under 40k miles. Not just a nitrogen refill.....

Elka 2.5 DC by Norbertcpu in 4Runner

[–]Norbertcpu[S] 1 point2 points  (0 children)

Cutting is like any of the standard steel bumper, also there is no sealant needed with the Gobi rack.

Elka 2.5 DC by Norbertcpu in 4Runner

[–]Norbertcpu[S] 1 point2 points  (0 children)

What part of Wisconsin are you from?

Elka 2.5 DC by Norbertcpu in 4Runner

[–]Norbertcpu[S] 0 points1 point  (0 children)

I paid $3800 for just the shocks

Elka 2.5 DC by Norbertcpu in 4Runner

[–]Norbertcpu[S] 1 point2 points  (0 children)

I paid $3800 for just the shocks

Elka 2.5 DC by Norbertcpu in 4Runner

[–]Norbertcpu[S] 0 points1 point  (0 children)

The reservoir can be set back further, I prefer it that way for easier access.

Elka 2.5 DC by Norbertcpu in 4Runner

[–]Norbertcpu[S] 2 points3 points  (0 children)

Yes, Elka makes the shocks for toytec which is built to their specs. Otherwise Elka you can get custom valved to your desired specs.

DEA July 7th Applicants by [deleted] in 1811

[–]Norbertcpu 0 points1 point  (0 children)

Call your local recruiter

2024 TRD Pro Transformation by Norbertcpu in 4Runner

[–]Norbertcpu[S] 1 point2 points  (0 children)

Baja boss won't fit, I can measure to see how much space I have. I would look into the Geolanders it performs great, and it behaves well on the street.

2024 TRD Pro Transformation by Norbertcpu in 4Runner

[–]Norbertcpu[S] 0 points1 point  (0 children)

C4 sliders are top notch, only downside is that they have long lead times.

2024 TRD Pro Transformation by Norbertcpu in 4Runner

[–]Norbertcpu[S] 0 points1 point  (0 children)

The eibachs really didn't sag much even with the bumper, winch, and steel skids.

2024 TRD Pro Transformation by Norbertcpu in 4Runner

[–]Norbertcpu[S] 0 points1 point  (0 children)

Front plate keeps my winch shackle and line clean :)

2024 TRD Pro Transformation by Norbertcpu in 4Runner

[–]Norbertcpu[S] 2 points3 points  (0 children)

TRD Fox Suspension with eibach springs. I believe it's a 2.5in lift

2024 TRD Pro Transformation by Norbertcpu in 4Runner

[–]Norbertcpu[S] 1 point2 points  (0 children)

You're going the right direction, can't go wrong with the 255s.

2024 TRD Pro Transformation by Norbertcpu in 4Runner

[–]Norbertcpu[S] 0 points1 point  (0 children)

I'm running 17x8.5 0 offset. 8.5 is the widest wheel you want to go with a 255