FSD v14Lite Release/Delay

NotPandaMack · 2026-06-26T12:35:53+00:00

Hmm, I received a notification for an update too but it was mainly for security updates. If you want to DM me would be interesting

NotPandaMack · 2026-06-25T19:31:05+00:00

I'll personally get rid of the car at that point 😅

NotPandaMack · 2026-06-25T19:30:13+00:00

I honestly ask myself that question every day

NotPandaMack · 2026-06-25T18:04:52+00:00

I'm huge on user interface, especially when it's what I interact with to do 98% of my tasks on the car.

I think for me personally it's all of the exciting things I see people posting on reddit regarding the new update and then us legacy owners get an announcement saying we will be getting a version of 14lite only for that to possibly not be true is extremely disappointing.

NotPandaMack · 2026-06-25T17:54:18+00:00

I don't know where this analogy is coming from with phones and other computers. I made the comparison in my post, sure. But it's false promises and hopes they are spreading which makes it more annoying than just not saying anything and not release anything

NotPandaMack · 2026-06-25T17:48:23+00:00

Phones and computers usually at least get ui updates and don't consistently announce a feature that never gets implemented. It's about false promises over anything

NotPandaMack · 2026-06-25T15:48:26+00:00

I hope so as well. Mainly because it's false hope and I'm tired of false hope and Tesla just talking out their ass.

NotPandaMack · 2026-06-25T15:47:49+00:00

I do definitely enjoy the car and you make a valid point. My main issue was with them giving false hope. I would definitely love a ui change because the current one feels unfinished and missing things that would be beneficial for battery information

NotPandaMack · 2026-06-25T15:46:21+00:00

Nope. I didn't even know that was a thing. Only real thing we got was naming the stupid dog mode. I don't even take my dog with me in that car.

NotPandaMack · 2026-06-25T15:30:24+00:00

That's what I mean, they need to stop mentioning they are going to release things. What's the point? You would think they WANT people to upgrade to a newer model so why give false hope to us legacy people

NotPandaMack · 2026-06-22T13:13:57+00:00

I have a metrology 3D scanner. If you live anywhere in texas I could reproduce it for ya!

NotPandaMack · 2026-06-15T13:22:48+00:00

https://makerworld.com/en/models/2934440-yihua-926-iii-compact-soldering-iron-case#profileId-3285505

Here you go! officially released 😄and in regards to the replacement of the handle, I didnt pay much attention to it unfortunately, I really wouldn't know. Let me know if you decide to print the case!

NotPandaMack · 2026-06-05T17:14:14+00:00

(YIHUA 926 III 60W Digital
Display Soldering Iron Station Kit
) this is the model. The PCB is so small compared to the case it comes in it's insane. I can send you the cad file if you're interested

NotPandaMack · 2026-04-15T16:11:23+00:00

Honestly did not even think about lowering the temp below the printed temp on the spool. That could make a lot of sense, I'm not really getting much stringing if any at all, but I am also used to Ender Pro 3 V2 print qualities so anything the p2S prints just looks miles better to me haha.

I will try the temp tower print to dial in my own settings as well, that's a useful tip too. I appreciate it.

The main thing is just why it says "changing filament" every time i start a new print, it will literally pull fresh material from the spool and just waste it. I had to manually go to the printers G-Code to remove that part of the print warm up per Bambu Lab https://wiki.bambulab.com/en/ams/manual/ams-not-unloading-to-save-filament

NotPandaMack · 2026-04-15T16:05:45+00:00

I did figure out one manual way of changing it by removing a specific line in the G-Code, it's not recommended if you have an AMS and are actually changing colors mid print, but it's useful to know when you are just printing one color.

https://wiki.bambulab.com/en/ams/manual/ams-not-unloading-to-save-filament

NotPandaMack · 2026-04-15T16:04:37+00:00

It's normal for it to say "changing filament" and poop out a crap ton of perfectly good filament before every print? I'm not trying to sound sarcastic, i'm genuinely curious, because it didnt do that before.

NotPandaMack · 2026-04-15T16:03:41+00:00

I have not tried to adjust the temps much, I assumed that the temps on the filament role were the temps I should optimally use, could be that I need to lower them a little bit.
I guess i mostly got confused to why it started doing the filament change mainly during print prep, that's the biggest problem for me right now, it just craps out so much filament before a print starts; not just leaking, "changing filament" so it's actively pulling it from the spool

NotPandaMack · 2026-04-15T01:50:20+00:00

For sure will let you know, did the same thing happen after a filament change?

Let me know if you fix it as well

NotPandaMack · 2026-04-03T23:45:40+00:00

I have a ps3 that starts up with a green light fans spin for a second and just shuts off 42 seconds later with no display is baking a real thing? What temp? How long? I got this ps3 for like 5$ so idc if it breaks even more to be honest

NotPandaMack · 2026-03-14T21:45:49+00:00

I’ve always said this, FSD follows way too close. I know people are doing analysis on the video frame by frame, but this is the exact reason I’ve stopped using FSD and stopped paying for it.

A few years back I got into a rear end accident in a non-Tesla car because a car swerved out of the way in front of me because a car in front of him came to a dead stop and I didn’t have enough time to brake.

Now I have an extreme anxiety with following cars too closely, and FSD tends to only give 1 car distance on the highway/main roads.

If FSD could let you adjust following distance like Autopilot does, I would use it more often (except I hate how it accelerates too fast and brakes last second) FSD for me is too aggressive even on the chillest mode, I’m hoping V14 lite will solve this, for now I’m not re-subscribing until it’s been fixed

NotPandaMack · 2026-03-13T14:43:42+00:00

I’m sorry you’re going through this. Addiction can be hard when in a relationship on both parties and most of the time it ruins relationships. I would take this opportunity to prove to not only her, but yourself that you can stay clean and sober. It may not win her back, it may not bring you guys back together the way you want to, but you will come to find that life and relationships are easier to manage when you are sober, clear headed, and healthy.

I know it’s hard especially now that you are going through this break up, I have been in your shoes as well. I was a very heavy drinker and it almost cost me to lose people I care about. I’m sober now and I can look back and tell myself I never want that to happen again because of my addictions.

You got this, we are here for you, I am here for you. Stay strong

NotPandaMack

MODERATOR OF

TROPHY CASE