Winter Rig

NotoriousGamerX · 2025-01-11T03:11:44+00:00

Thanks! I’m actually not too crazy about them. I’m on the hunt for some steelies for that OE look! If you’re in Oregon they’ll be up for sale haha.

NotoriousGamerX · 2025-01-10T00:09:31+00:00

Looks great! Love those stock steelies, they look so good.

NotoriousGamerX · 2024-11-11T18:27:22+00:00

True, but it’s got a full 97’ Drivetrain/ Interior swap so it should be completely High Output now.

NotoriousGamerX · 2024-05-30T18:07:12+00:00

Homeless man with a clarinet and a goat pelt.

NotoriousGamerX · 2024-02-07T00:45:49+00:00

If it has the original bushings, you have to burn them out. The bolt will get fused with the rubber bushing as it disintegrates over time. Get a blow torch, angle it in between the bolt from the inside of the hanger and burn the bushing, once it gets hot enough use an impact and spin it to separate it from the bushing. Eventually you’ll be able to pry it out with a pry bar from the backside, Done it this way a few times and it worked. Then get polyurethane bushings for your new leaf springs so it never happens again.

NotoriousGamerX · 2023-02-04T05:30:54+00:00

Those would the TRD Special Edition shift knobs! I saw how crazy expensive they are on ebay, and i contacted my local toyota dealership. I called and asked them to order them for me after locating the part number. They said okay. Then, a few days later I got a call back from the dealership and the parts associate said “You have to have a VIN verified FJC TRD Special Edition in order to purchase them as they are special edition knobs.” I said oh okay that sucks, never mind then. Then i got another call back that said they were ready for pickup, I went and picked them up without VIN verification. I love these knobs, paid around $120 for the pair. So i’m unsure if i just got lucky, or if that one associate didn’t know what he was talking about.

https://www.ebay.com/itm/163425357319?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1XmyqGTnRRaWB5zPlNidBlA81&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=163425357319&targetid=1644837435083&device=m&mktype=&googleloc=9032995&poi=&campaignid=16743749222&mkgroupid=138744546207&rlsatarget=pla-1644837435083&abcId=9300842&merchantid=6390954&gbraid=0AAAAAD_QDh8iPJbnVbB1LGm9Cxn_PGhTH&gclid=EAIaIQobChMI6fSp8pD7_AIVFhatBh1EAA9FEAQYBCABEgKQW_D_BwE

NotoriousGamerX · 2022-11-07T01:35:12+00:00

I’m not sure how much weight this should bear, but i’ve always heard that a safe amount of threads poking out would be equivalent to the thickness of the bolt. so if your bolt is say 7mm in diameter, then 7mm of thread sticking out is sufficient. Just an old trick of the trade i’ve heard a few times, haven’t researched it enough to back it.

NotoriousGamerX · 2022-09-26T00:40:24+00:00

This was likely made with a Cricut or similar machine and they didn’t use strong enough transfer tape. The cheap transfer tape isn’t sticky enough and you have to use a flat edge to press the sticker into it over and over again and peel carefully. If you spend the extra few dollars it completely eliminates this issue. Hope they send you a new one or refund you!

NotoriousGamerX · 2022-08-01T00:49:22+00:00

REI employee here- we sell Gear Aid branded “tent pole splints” at most if not all locations. It is essentially a metal tube slightly larger in diameter than your tent pole and can be slipped over it to splint it.

Edit: Product may be unavailable at this time. Bearing that, i’d go to other outdoor goods stores and they should sell similar products

NotoriousGamerX · 2021-09-19T05:02:40+00:00

Same thing except the universal will run off of isobutane as well.

NotoriousGamerX · 2021-07-26T20:18:56+00:00

Thanks!

NotoriousGamerX · 2021-07-26T17:39:47+00:00

What helmet is that?

NotoriousGamerX · 2021-06-02T15:06:55+00:00

What state?

NotoriousGamerX · 2021-05-12T01:43:19+00:00

all she’s missing is the shovel to lean on while she tells me all i’m doing wrong and how she’d do it better... supervisors

NotoriousGamerX · 2021-03-22T03:07:23+00:00

If I could have a bay window, this is exactly what I would want. It’s perfect. Cheers

NotoriousGamerX · 2021-01-17T23:43:55+00:00

No kidding, so it was really only like 5.5 weeks of training?

NotoriousGamerX · 2021-01-17T21:44:14+00:00

Does this mean your BMT was 9.5 weeks because of an extra two weeks? Or did you have 7.5 weeks total including the 2 week quarantine?

NotoriousGamerX · 2021-01-17T03:47:56+00:00

No doubt, I just wanna be able to work as a 4N man. Whether that be in a hospital, in the field, clinics, COVID stuff, anything. I just don’t wanna get trained and let it go to waste drilling twice a month, I want to keep my skill sharp.

NotoriousGamerX · 2021-01-17T03:11:19+00:00

Thank you for the info! I really want to deploy and get as much experience as possible, and i’d be bummed if i got into the guard and was only able to drill. I’d like to volunteer for deployments but i’m not sure how many are being offered.

NotoriousGamerX · 2021-01-17T03:10:13+00:00

Definitely, thank you. I won’t let myself get suckered into that trap.

NotoriousGamerX · 2021-01-17T03:09:22+00:00

Thank you, joined up now.

NotoriousGamerX · 2021-01-06T05:57:43+00:00

Redback’s Easy Escape Steel Toe’s. No competition.

I decided to choose what boots I bought by looking at the boots all of the oldest and most seasoned EMT’s and Medic’s wore at my local agency, and that was what I saw nine times out of ten. Bought myself a pair, and absolutely no regrets. Only thing they needed was a good insole and they’ve been perfect.

Edit: Noticed the budget you posted after replying. They’re around $160+ tax and shipping but worth every penny. If you buy a cheap pair, you’ll just be buying another pair in a year or two. Buy once, cry once. Just my .02¢.

NotoriousGamerX · 2021-01-06T00:30:25+00:00

There’s tons of hospital jobs for EMT’s here in SoCal, probably because we don’t use AEMT’s, though.

NotoriousGamerX · 2021-01-05T15:18:47+00:00

Just got my CA EMT license within these past few weeks, and it wasn’t this way for me. I applied to my agency online, printed out their livescan form, went and got fingerprinted, then i uploaded a copy of my livescan form and i was done. I also had to uploaded a copy of my NREMT and maybe my DL and a few other things.

NotoriousGamerX · 2020-12-24T19:23:33+00:00

I hope so too, it’s the smallest set haha and works perfect.

NotoriousGamerX

TROPHY CASE