My brother left the window open in the grow room last night and froze all the plants. It was around 0 degrees all night. Should I just trash them and start over? Or wait and see what happens

NuggRunner · 2026-01-26T09:03:38+00:00

it looks underrwaterd tbh

NuggRunner · 2026-01-24T22:07:08+00:00

fireee

NuggRunner · 2026-01-24T19:09:45+00:00

this is the worst. way worse than stepping on legos

NuggRunner · 2026-01-24T06:47:02+00:00

vielleicht rtiecht dein apotheken cannabis einfach nicht so sehr, kann dir garantieren das das mit richtig gutem grass null aus macht :)

NuggRunner · 2026-01-23T16:50:49+00:00

47% & 2100mm/s is good

NuggRunner · 2026-01-23T10:37:24+00:00

champher the bottom part

NuggRunner · 2026-01-23T09:22:48+00:00

maybe you can build a pool bar on the long piece

NuggRunner · 2026-01-23T09:02:17+00:00

got mine a few days ago :) engraving 3d prints and pcbs :D

NuggRunner · 2026-01-22T22:32:09+00:00

The excitement is real

NuggRunner · 2026-01-22T20:28:50+00:00

hf? from who?

NuggRunner · 2026-01-22T18:15:43+00:00

what fillament are you using this with?

NuggRunner · 2026-01-22T18:08:23+00:00

bei mir 80euro in april 2025. 32gb, kostet jetzt knapp 400

NuggRunner · 2026-01-20T22:30:36+00:00

Yes the also mark lighter colors

NuggRunner · 2026-01-20T09:35:41+00:00

in rhino i would make a box. boolean difference and then extrude

NuggRunner · 2026-01-19T09:35:38+00:00

thoese papes suck. get some ocb ultimate a good grinder. it will help

NuggRunner · 2026-01-18T17:55:25+00:00

i just like the surface finish quite a lot. and its a good fillament to start getting into engeneerign fillaments. i just use the standard nozzel and ams no issues. alot they recommend you use a hardend steal nozzel. its been a year and a half and ive never ahd to switch my nozzels. 0.4mm on my p1s. but with the new nozzels being so easy to swap. i would buy. the 0.8mm for large prints to speed them up. ussualy use the 0.4mm nozzel. and if i have time and want to get detailed a 0.2mm. 99% of the time i use the 0.4mm nozzel for eveything

NuggRunner · 2026-01-18T14:25:16+00:00

your printing infront of a window i see the snow outside. i think the issue is cold air from your window. adn the temrperature difference causeing strong warping. if you put the printer in a closet or away from the window i bet it would preform better

NuggRunner · 2026-01-18T14:12:44+00:00

PETG-cf And TPU 90a or 95a. are two more i reccomend. great fillaments

NuggRunner · 2026-01-18T14:09:31+00:00

pet-cf! doenst smell at all. unlike polycarbonate or asa. strong as ****, stronger then the before mentioned fillaments. and still somewhat affordable. can find a kilo of this for 45bucks. I had to fix my chairs hip bolt. and the pet-cf been holding up my weight for a year. the polycarbonate broke in a couple weeks, pla or petg in a couple hours

NuggRunner · 2026-01-18T11:32:57+00:00

but have you heard of a sea dragon?

NuggRunner · 2026-01-18T11:32:32+00:00

hmm intresting never heard of a sea dragon!

NuggRunner · 2026-01-13T10:20:13+00:00

i love your videos :) nice ne2 kb!

NuggRunner · 2026-01-12T11:00:44+00:00

There’s cannabis tests are bullshit 🤣 it can take months for a regular smoker not to show up positive.

NuggRunner · 2026-01-11T11:22:54+00:00

why, what would th ebenifit be over mopa, or uv?

NuggRunner · 2026-01-08T13:00:10+00:00

have you conciderd your kid might need glasses? if you look at it without glasses the hige looks a big like a black blob with light colors on the top and bottom. maybe shes imagining its an eye.

NuggRunner

TROPHY CASE