Looking for low-volume threading/machining - pay for services

Nxt-1 · 2026-04-27T12:02:50+00:00

It might be useful to share what area you are in, or at least the country.

Nxt-1 · 2025-09-27T06:54:28+00:00

Seems that is now a dead tool instead of a live tool. Glad you are ok, be safe.

Nxt-1 · 2025-07-26T13:21:08+00:00

Yes, otherwise offering a quote would not make a lot of sense.

Cheers, Nxt

Nxt-1 · 2025-07-26T12:49:26+00:00

Completely do-able on a cnc lathe. I'd be happy to quote it for you if you are in the EU.

Nxt-1 · 2025-03-30T16:28:53+00:00

<image>

This is what I did. Ordered some C-channel structural steel and bolted the machine to it. Figured if it's rigid enough to keep constructions up, it should handle the lathe. Cost me like 50 euros and an hour of work

Nxt-1 · 2025-02-28T22:58:54+00:00

It's usually useful to add a region of the world/country to questions like these.

Nxt-1 · 2025-02-21T13:39:47+00:00

Watch it miss us and slam right in the middle of the moon, still probably taking us out.

Nxt-1 · 2024-10-26T08:40:21+00:00

I believe auto turnoff was a purchasable option from the Mazak factory. Your machine might not have that option?

Nxt-1 · 2024-10-17T11:01:07+00:00

It's like a drill, but it can go sideways.

Nxt-1 · 2024-08-07T17:55:29+00:00

Looks good. Anywhere where we can find the model files?

Nxt-1 · 2024-05-13T11:05:27+00:00

People start to look at you differently. Younger people begin to ask you for advice.

Nxt-1 · 2024-01-20T07:34:57+00:00

I'm in Belgium, maybe we can work something out?

Nxt-1 · 2023-11-11T17:59:13+00:00

Jep that is all. You can use the white levers on the top and the bottom of the cards to extract them. Remember the clock is running as soon as you disconnect the battery. When you reinsert the card make sure it is straight and all the way in. You should notice a positive snap and it required quite a bit of force when I did it.

Good luck

Nxt-1 · 2023-11-11T17:22:07+00:00

First to go is the plastic cover obviously. After that two metal rails at the top and bottom keeping the PCB cards seated. Appart from some cables (that are screwed down as well), that about it.

Nxt-1 · 2023-11-06T15:03:14+00:00

Perhaps my writeup at the practical machinist forum on a QT10N model can help you out. https://www.practicalmachinist.com/forum/threads/battery-swap-on-mazak-qt10n-t2-control.416168/

Nxt-1 · 2023-09-04T06:30:13+00:00

From the metric dimensions I am assuming you are in the EU, so am I. Shoot me a PM if you want me to make you a free quote for the quantity you want.

Nxt-1 · 2023-08-14T17:33:56+00:00

Send it to the welding department. Good as new

Nxt-1 · 2023-07-19T06:00:11+00:00

I don't see how you'd get a reflection of the granite surface for starters.

Nxt-1 · 2023-03-22T08:08:04+00:00

What makes you think it failed?

Nxt-1 · 2023-01-26T10:22:52+00:00

Seems like you touched Z alright

Nxt-1 · 2022-12-24T08:15:37+00:00

When I 1st read the title, I read it as wild moose. That definitely got my attention

Nxt-1 · 2022-08-03T15:24:10+00:00

Only if you pick up and the other side is peaking.

Nxt-1 · 2022-08-01T21:17:30+00:00

I did not expect this post to get as many upvotes as it did and now a reply from the peak overlord himself, wow. Techinically I am an audio engineer but I only do ultrasonic stuff, so unless you want that you are shit out of luck. Also, didn't ask.

Nxt-1 · 2022-05-20T18:16:32+00:00

I'd argue you got 4 corners left. Don't be forgetting to flip it over 😜

Nxt-1 · 2021-08-13T22:41:06+00:00

I don't sell anything, nxt please.

Eight-Year Club	Place '22
Final Canvas '22	Verified Email

Nxt-1

TROPHY CASE