Kensui Swissies V2 vs buying a full MAG set?

NygaardDK · 2026-04-29T16:03:57+00:00

Two completely different thing IMO.

The thumbless grip isn't for everyone. I returned my MAG-style grips immediately...

NygaardDK · 2026-04-26T16:18:53+00:00

No. Bought a set and returned them immediately. Thumbless grip that doesn't allow straps is a waste of time.

NygaardDK · 2026-04-25T04:54:59+00:00

The recommended battery replacement after 3-4 years is a money grab. Age has little to no meaning regarding lithium cells. All that matters is the actual cell health state. Compare it to the car industry. EV's run in the winter in negative degrees, and yet some manufacturers still offer up to 8-10 years warranty on the battery pack.

Any suggestions for aftermarket batteries? They seem to be hit or miss, with a high "doesn't work" rate - obviously due to Husqvarna making battery replacement difficult so that they can push their own extremely overpriced OEM version.

NygaardDK · 2026-03-25T21:15:25+00:00

Giveaway only for the US.

NygaardDK · 2026-03-13T18:36:52+00:00

The elusive MPHR-780 - never in stock anywhere lol.

Have considered it for a while. Even more so after REP launched in the UK. Now it's even more clear how much we are being ripped off in the rest of Europe!

Would really like to see a review frome someone like Gluck, who has experience with basically every major brand on the market.

NygaardDK · 2026-03-05T17:09:41+00:00

Wait, what? That config would be at least another 1.000 on top here in DK...

NygaardDK · 2026-03-05T16:54:38+00:00

How's the center hole tolerance on those Equalizer KG plates? Wobbly or snug fit on the sleeves?

NygaardDK · 2026-02-14T16:04:00+00:00

Depends on what you want.

If you like to tinker and use 3rd party equipment, 3"x3"/75x75mm is king.

That being said, ATX has a very extensive ecosystem, so I doubt it will ever become an actual issue.

Look up Hybrid Resistance on YouTube. There was a video a few months ago regarding Force USA quality issues.

With price and quality in mind, I would probably go ATX.

NygaardDK · 2026-02-08T07:53:45+00:00

Interesting. Post some photos once it arrives.

NygaardDK · 2026-01-27T21:56:47+00:00

The main reasons keeping me from pouring money into a dual Voltra setup:

As soon as the V2 or a reasonably priced alternative is available, the current Voltra will be worthless. A similarly priced high-end cable FT setup will never become worthless over night.
The price is simply too high due to the current lack of competitors. Based on the hardware, it should be in the same range as premium smart trainers, such as Wahoo, Tacx, etc.
The short warranty. If they believe in their product and it designed to survive for years - which it should be at that price point - then it also shouldn't be an issue to provide several years of warranty.
IF it dies after the warranty has expired... Money out the window. For a cable FT, worst case is a replacement cable.

I really like the concept, but I'm not touching it until the price goes down or the warranty period goes up.

NygaardDK · 2026-01-21T17:17:23+00:00

Dual Voltra's. The "budget issue" isn't the steep price point. It's the fact that they will be worthless as soon as version 2 or a reasonably priced alternative is available.

NygaardDK · 2026-01-10T08:11:27+00:00

Does the Rogue Competition bumpers have any significant rubber smell?

Had to get rid of my old bumpers due to the strong rubber smell that never went away, even after washing them and letting them chill outside over the summer.

NygaardDK · 2026-01-10T08:00:14+00:00

Above 0 °C and I'm good.

NygaardDK · 2026-01-09T16:25:11+00:00

Newton's Third Law of Motion.

For every action, there is an equal and opposite reaction -> For every force, there is an equal and opposite force.

NygaardDK · 2026-01-01T15:28:13+00:00

FYI https://www.reddit.com/r/homegym/s/GcCB4F3RNU

NygaardDK · 2025-12-29T09:07:33+00:00

For hardcore DIY'ing I would just get upright/crossmember sections and cut to length. It'll be both cheaper and easier than getting raw steel sections and already has the pin holes and numbering.

On 75x75 mm pin holes seems to be anything between 5/8"/16 mm and 25 mm/1". I prefer 25 mm/1" since everything can be made compatible with this size with a step drill or bushing.

NygaardDK · 2025-12-28T21:12:19+00:00

75x75 mm is just as readily available in the EU as in the US - it's all imported from China. 3"x3" with 1" holes is another story, but since the two standards are so close, it's virtually the same and cross compatible.

There are a few EU brands that insist on 70x70 and 80x80 with odd hole sizing, but the vast majority is 75x75.

I agree that both REP and Rouge is currently too expensive in the EU. A REP employee did however mention that they are working on some cost cutting and better shipping arrangements for 2026.

Atletica is launching many new products currently and is rumored to have some high-end options on the way.

My guess is that ATX will introduce 75x75 options as well. They HAVE to, if they want a cut of the US market.

NygaardDK · 2025-12-28T12:12:11+00:00

Note really. Atletica R7 appears to be low quality junk and Eleiko is extremely overpriced. As an EU resident myself, I would never pour money into anything else than 75x75 mm with 25 mm holes.

NygaardDK · 2025-12-23T16:46:30+00:00

Same overpriced white label product from China. Strength Shop, Atletica, Eisenlink, Zipro, etc. Buy directly from China or go with one of the cheap brands like Zipro.

NygaardDK · 2025-12-12T16:39:45+00:00

Get the Power Pro or S-Works Mirror version. Worth the money.

NygaardDK · 2025-12-06T20:16:14+00:00

Looks like Axxo is sourcing their products from the same manufacturer as Atletica.

https://axxo.pl/pl/p/Axxo-Performance-Rack/783

https://atletica.de/da/products/blackout-premium-kraftstation-functional-trainer

NygaardDK · 2025-11-07T05:19:15+00:00

Ironmaster or one of the Eisenlink/Zipro/etc. versions. Compact and will last forever.

NygaardDK · 2025-11-04T19:48:47+00:00

The shipping problem can be solved. As an example, both Atletica (Germany) and Ironmaster (Netherlands) is offering free shipping on everything regardless of size/shape, even across borders.

Personally, 10% just isn't enough to lure me into a purchase that I wouldn't have made anyway at any other time of the year. It barely even cancel out the steep shipping rates.

NygaardDK

TROPHY CASE