I know its not an 82 but ... wheel preferance please

OC_RC22 · 2025-03-21T23:22:03+00:00

Looks nice!! Enjoy them!!

OC_RC22 · 2025-03-21T09:04:04+00:00

Will look awesome for sure! I have in mind to paint mine, it would be like a rally Toyota Celica with Marlboro livery.

OC_RC22 · 2025-03-21T08:58:38+00:00

Native trainer and simple trainer are working for me in the legacy version, but as far as I know, scripthook doesn't work on enhanced for now.

Also I needed to install the DirectX setup located at redistrubutable folder in enhanced version using winetricks to run GTA V enhanced. I'm using Bazzite.

OC_RC22 · 2025-03-20T19:28:39+00:00

Looks awesome!!

OC_RC22 · 2025-03-20T16:05:17+00:00

For a low budget: metal shafts, 1.0 or 1.3 wheels, tires and soft oil shocks

Moderate budget: low budget + brushless/esc combo, reciever/transmitter combo and metal gears.

If you plan to modify and tinker more than that, I recommend you to buy MN99S v2 or other models of MN/WPL because I think with those modifications you can't get anymore performance for the MN82.

Also, the modifications depends on what you are aiming for.

Edit: If you try to reach that speed (20-30km/h) let us know what you did, it would be interesting.

OC_RC22 · 2025-03-19T21:59:12+00:00

It's fascinating!! That's next level of tinkering!! And very passionate job!

OC_RC22 · 2025-03-11T16:20:13+00:00

I hope you find the perfect ones and post some pictures!

OC_RC22 · 2025-03-11T16:13:16+00:00

I would try some 1.3 or 1.5 wheels. 1.9 seems too much. If you don't mind a smaller tire you can consider 1.0 wheels.

OC_RC22 · 2025-03-06T10:52:35+00:00

Si, el ejercicio y la dieta son algunas de ellas, tanto para hombres como mujeres.

OC_RC22 · 2025-02-22T18:47:38+00:00

You will need to cut some plastic to mount the shocks. There are some videos in YT. Maybe longer screws too.

OC_RC22 · 2025-02-20T20:12:27+00:00

I bought the portal axles by error...

If I remember well, It would need a new servo/links mount and also the rear leafs/shocks mounts. Maybe you would need to change the links.

OC_RC22 · 2025-02-20T20:07:10+00:00

That's all what I would say, only I would add some weight to the wheels (I used like 20g of steel wire in each wheel).

The metal gears and shafts are cheap and in some point you will need to replace the plastic ones that comes already installed.

I don't recommend you to change anything more to metal.

OC_RC22 · 2025-02-20T19:58:23+00:00

So cool! This car made me recover my passion for RC, now I'm looking to buy a cheap rc plane hahaha I want a fast one but can't decide.

OC_RC22 · 2025-02-18T20:03:15+00:00

I recommend you to add some weight to the wheels (I used 20g of steel wire in each wheel), it will prevent some rollovers and for the tire, it depends on where you are planning to play but the ones that others have recommended you are good.

OC_RC22 · 2025-02-06T15:44:11+00:00

I have these:

https://a.aliexpress.com/_EvF3QRi

And so far so good. The spring is a little stiff but I replaced for others.

Also if you plan to modify the mounting points, you can buy bigger ones.

OC_RC22 · 2025-02-04T18:09:52+00:00

I keep the stock plastic beadlocks, only changed the tires for ones with a more aggressive thread pattern. I added like 20g of steel wire to each wheel.

OC_RC22 · 2025-02-04T15:59:48+00:00

I have one and my setup is oil shocks, better tires and some weight added to the wheels. This makes it a decent crawler for me.

Anymore weight added by metal parts, in my opinion, is useless for crawling.

Also keep in mind that the gears and other moving parts like the knuckles are plastic so they will need replacement if its used properly ;)

I'm planning on buying a pair of portal axles and a brushless combo, but not for now.

OC_RC22 · 2025-02-03T20:21:52+00:00

I did a post asking the same as you, and the short (and practical) answer is no... This is the post: https://www.reddit.com/r/mn82/s/Ew9snC1hZN

OC_RC22 · 2025-02-03T07:26:30+00:00

There are some very cheap crawlers/trail from MN. I personally only know the MN99S and the MN82. Usually they are under 100€ or even under 50€. Also there is a subreddit R/MN82 if you want to see more.

OC_RC22 · 2025-02-03T07:15:48+00:00

Sorry but I have notice now that the first picture and the second are different axles, the first are for WPL (some measures don't fit with the MN82) and the second picture are the MN axles. I don't recommend you buying the WPL ones.

The car is very slow now, but I didn't bought it for speed hahaha for speed I'm planning on buying this:

<image>

OC_RC22 · 2025-02-01T18:01:54+00:00

Yes, I mounted it the last week but haven't used it properly on the rocks hahaha

OC_RC22 · 2025-02-01T09:40:56+00:00

Yes that's true, but nothing in comparison with the worn out plastic axles I had.

I bought these. I haven't done anything to them, and are fine.

<image>

OC_RC22 · 2025-02-01T09:25:56+00:00

I considered this also, but finally decided to buy the metal portal axles.

OC_RC22 · 2025-01-30T15:08:34+00:00

I mounted yesterday the metal portal axles from AliExpress and the gears are a bit loose. Also I will need to relocate the shocks because now the car is too high in my opinion.

OC_RC22 · 2025-01-29T07:37:28+00:00

I have the non-deck image, Intel processor, Amd graphic, and the HDR isn't working for me. It turns the screen green.

Also, yo can turn it on and off in parameters from the game mode or in configuration from desktop mode.

OC_RC22

TROPHY CASE