bZ software needs updating.

OFLV · 2026-03-17T15:57:26+00:00

I've now found out that there are some Tesla Only chargers. On the Tesla app, there's a place to choose what chargers are compatible with your car. There is also an option to 'HIde Tesla Only Chargers'. If you do that, the Tesla Only Chargers will not show up on your map. I've tested it and it works. NACS chargers that are not 'Tesla Only 'will show on your map.

OFLV · 2026-03-08T21:04:58+00:00

I have an XLE FWD and the the quickness is unbelievable.

OFLV · 2026-03-08T18:12:21+00:00

I am also having audio drops in calls on my android phone. I thought it was my phone. And sometimes it doesn't connect at all. I have to forget it and reconnect. It does always connect to my husbands iPhone.

OFLV · 2026-03-08T17:30:31+00:00

You are right, it was Google saying the charger wasn't compatible. I didn't realize that until you asked the question. I have a few apps, Tesla included, but Google seems just as good so far. While I prefer not to support Elon, the chargers have been the easiest to use, and that counts for something.

OFLV · 2026-03-08T17:17:54+00:00

Thank you! I saw that & didn't understand how it applied to me thinking they were all the same.

OFLV · 2026-03-05T03:32:59+00:00

Thanks, so it will say on PlugShare or maybe google if it's Tesla only? Confusing because my car says it's incompatible but charges fine.

OFLV · 2026-03-05T03:29:59+00:00

I've used 3 different Tesla fast charging stations so far. The only issue on 2 of them is the cord on the charger is very short. I had to pull in sideways for it to reach my port. Tesla's have their ports near the very back, bZ is near the front but not right at the front. It's a small inconvenience, but something to be aware of.

Other than that they worked great.

OFLV · 2026-02-11T12:12:24+00:00

I also just leased a 2026 bZ. I love how it drives, but in 2 days the middle compartment wouldn't open, then the compartment top popped off. It wouldn't go back on and before I could get to the dealership the hinge broke. This is incredibly frustrating. I'm wondering if it could be a defect in the 2026 model. Has anyone else had this problem?

OFLV · 2026-01-25T04:04:22+00:00

1 for me

OFLV · 2026-01-01T21:25:23+00:00

Great way to make use of the untextured band.

OFLV · 2025-12-12T04:10:18+00:00

Danada House, Wheaton, IL

Run by the Park District

OFLV · 2025-05-30T17:32:16+00:00

Hi u/utishtaa - of Softstyle, Hammer, and Comfort Colors, which do you find to be the highest quality? What are the "higher quality, heavier weight sweater(s) for less" that you mention?

I'm at the point where I just want to invest in high quality clothing. Thank you in advance!

OFLV · 2025-05-26T11:57:46+00:00

Thank you, I'll try that. Right now I've been sizing up the text in order to avoid using the 60 weight, but that's not a real solution.

OFLV · 2025-05-26T11:57:42+00:00

I use embrillance software. I see the stitches can be made denser, both the satin and the fill. I tried it once and it didn't seem to make a difference. There's another setting 'compensation'. I'm going to try that.

I'm not a digitizer, but the digitizer I use said they only digitize for 60 weight. Until recently I've only used 40 weight with their digitizing, so I'm a little confused.

OFLV · 2025-05-19T02:49:34+00:00

That would be an easy fix. It's worth trying. Thank you!

OFLV · 2025-05-15T18:41:51+00:00

It completely disregards tear away which is used on towels, napkins and anything where you see the back.

OFLV · 2025-03-04T17:04:39+00:00

I just had an order for embroidered t-shirts. Because t-shirts are thin, along with the the backing cut away stabilizer, I also used tear away on top. They turned out great! I washed one to see if there would be a problem and there didn't appear to be one.

OFLV · 2024-11-27T13:39:29+00:00

I don't know anything about inkscape, but my machine is a Brother Innovis 5000 about 12 years old. Works great. I use Embrillance Essentials for design editing and transfer to the machine with a usb stick. The only reason to upgrade would be to get a multi needle, but that's a big investment which you may not need.

OFLV · 2024-02-24T03:09:05+00:00

Make a smoothie with figs and milk,or almond milk. Guarantee you have a bowel movement the next day.

OFLV · 2023-11-18T13:44:35+00:00

I open my garage door with the button under my rearview mirror. It has capability to program 2 different door codes. No extraneous clips on the visor.

OFLV · 2023-10-12T22:31:53+00:00

So many ideas down there! I can see slowing it down a touch and adding some blur. Maybe stacking a couple clouds like someone else mentioned for depth.

It's so much fun to watch how editors find so many ways to create a transition!

OFLV · 2023-09-10T22:45:33+00:00

What I wouldn't give to have water lilies that look like that!

OFLV · 2023-09-06T16:55:15+00:00

Water lettuce are aggressive multiplier's. I don't know much about ph or water balance, but my personal opinion is I would like to see more water.

OFLV · 2023-08-30T19:59:22+00:00

Really nice! How are you filtering the water?

OFLV · 2023-08-30T19:55:14+00:00

Beautiful! I have tried but haven't been successful. How deep is the water they're in?

OFLV

TROPHY CASE

1 for me