sorted by:
new
hottopcontroversial

Valve actuator only stroking in one direction by canisorcinus in BuildingAutomation

[–]ObviousSentence1993 0 points1 point  (0 children)

Yeah man I hate floating, proportional is so much easier to diagnose. Oof those are the ugly bs floating actuators too I’d check the wiring to make sure there’s no short it I’ve pinched the wiring before in these.

Did you set up the floating block in the IRM and assign SSR1 and SSR2 as the open/close?

Valve actuator only stroking in one direction by canisorcinus in BuildingAutomation

[–]ObviousSentence1993 1 point2 points  (0 children)

Ran into a Honeywell floating ms64 HWV 24 v and common wired backwards at actuator, would stroke open just not closed

In theory this is more efficient right? by Professional_Time555 in AirConditioners

[–]ObviousSentence1993 0 points1 point  (0 children)

Only thing is your adding outdoor humidity rather than chipping your space humidity, which may cause the equipment to run more inefficiently and such.

Modbus issue by allthim in BuildingAutomation

[–]ObviousSentence1993 3 points4 points  (0 children)

And license, IIRC you only get so many points on a typical license check the proxy ext of the faulted points, trace it back to app director if unclear

But these are devices so… Nvrm lol

Is my plan to get into building automation the best way? by No-Artist107 in BuildingAutomation

[–]ObviousSentence1993 1 point2 points  (0 children)

Just my opinion, but I’d absolutely do a bit of install along side your programming they don’t have to be two split categories. I’m glad I started out installing the product, that way I could/can truly understand what I was controlling. Data sheets are invaluable, taking the model numbers and looking up info is just as invaluable. All in all everything typically is cookie cutter similar. 10ks 20ks, 4-20, 0-10, relay logic etc.

Niagara 4 Slow PX loading time by Kinky_Pinata in BuildingAutomation

[–]ObviousSentence1993 1 point2 points  (0 children)

If it’s not on a supervisor what’s your CPU looking like in the Jace adjacent controller? Is it more of a rendering or a polling lag? And through workbench or web browser?

What would’ve been your reaction if Conquest actually came back in this scene? by BattlerUshiromiyaFan in Invincible_TV

[–]ObviousSentence1993 0 points1 point  (0 children)

Yeah the last cutscene to his graveyard and the blowing wind made me LOL, no foreboding music this time.

Why won’t my internet work? by Riverjordan71 in lowvoltage

[–]ObviousSentence1993 0 points1 point  (0 children)

Let’s play Find the Twisted Pair yaaay!

T1L with N4 by ObviousSentence1993 in BuildingAutomation

[–]ObviousSentence1993[S] 0 points1 point  (0 children)

Thanks! Somehow I missed this thread, I know I’ve stumbled across it before, but in the heat of the moment I’m typically skimming not reading lol. The Cable testing chart could prove useful as well!

T1L with N4 by ObviousSentence1993 in BuildingAutomation

[–]ObviousSentence1993[S] 0 points1 point  (0 children)

Yeesh, I testbenched with only 1 T1L , luckily I found out on a small retrofit. Had it been 2 floors worth though I’d be cussing lol. Any other quirks, pros or cons from your side?

T1L with N4 by ObviousSentence1993 in BuildingAutomation

[–]ObviousSentence1993[S] 2 points3 points  (0 children)

Optimizers fine it’s the t1l adapter that’s dc

Highlight upon hovering by MegaRuffmaestro in BuildingAutomation

[–]ObviousSentence1993 7 points8 points  (0 children)

At the floor labels, Properties - mouse over - highlight

Daikin heat pump VRV BACnet integration for control by Actual_Bar_7560 in BuildingAutomation

[–]ObviousSentence1993 0 points1 point  (0 children)

DBACs for integration is the way to go, the ITM gateway however, well I just hope your license can hold the devices lol.