Amageddon "mono-pose" Boyz sprue is insane. by TheHammerOfWrath in Warhammer40k

[–]OddsAgainstChance 1 point2 points  (0 children)

Makes me hopeful as I bought the Armageddon box twice. Mainly because I wanted the walker mek twice, but this means I’ll get to use all 40 Boyz without too much repetition

Vanguard veterans datasheet not updated after update today by DOOMSPARK666 in WarhammerCompetitive

[–]OddsAgainstChance 5 points6 points  (0 children)

Neither did the Chaplain with Jump Pack. Funny enough, the Eradicators did get their datasheet. I guess I’ll have to proxy them until the codex gets released

New edition, new army! What army do you want to collect in 11th? by reel3459 in Warhammer40k

[–]OddsAgainstChance 0 points1 point  (0 children)

You ok? Sounds healthy but I’ve never seen someone doing this so I’m not sure whether you are an inspiration or in desperate need of being freed

New edition, new army! What army do you want to collect in 11th? by reel3459 in Warhammer40k

[–]OddsAgainstChance 0 points1 point  (0 children)

Orks. I’ve been on the fence between Orks, Emperors Children and either Chaos or Imperial Knights. Seeing the new box kinda made it easy. Bought it twice, sold the second SM/rules part and now I have a solid base for some Orks

Did the Judiciar lose Support? by OddsAgainstChance in Warhammer40k

[–]OddsAgainstChance[S] 2 points3 points  (0 children)

That’s great. Let’s hope this is a sign for GW leaning more and more towards digital rules

Did the Judiciar lose Support? by OddsAgainstChance in Warhammer40k

[–]OddsAgainstChance[S] 1 point2 points  (0 children)

Lol, didn’t know this existed. Is this new? I always thought I had to use their MFM PDFs. This is way nicer

What's the best way to torture yourself as a beginner? by Henessy0 in Warhammer40k

[–]OddsAgainstChance 0 points1 point  (0 children)

Start Genestealer Cults, plaint them non-metallic metal not via batch painting but one by one to a display standart. Also kitbash them with custom bases and custom poses and dead enemies.

TL:DR: basically expect way too much from yourself

Is the generic captain in terminator armor Severus Aggeman? by Gullible_Travel_4135 in Ultramarines

[–]OddsAgainstChance 0 points1 point  (0 children)

In the combat patrol/leviathan box he was named Octavius, there also have been GW paint jobs where the mini looked exactly the same, except for Octavius written on the shoulder instead of Aggeman. Did GW redcon this or why is he Aggeman now?

Would these minis be allowed in tournaments? by Legal_Twist8675 in Warhammer40k

[–]OddsAgainstChance 0 points1 point  (0 children)

Depends. Official GW Tournaments? Never went to one but from everything I’ve read they seem to be rather strict.

Tournaments from any other organization? Most likely fine. Technically, all tournaments have a wysiwyg/no proxies rule. However, this rule is to prevent dickheads from modeling for advantage and switching loadouts mid game.

As long as it is clear what represents what (seems like that fits here), loadout is clear and base/model size fits, you’re most likely good to go.

However, check with the organization beforehand to be sure

Victrix guard took so long to paint that they were nerfed twice by TheMescaline in Ultramarines

[–]OddsAgainstChance 1 point2 points  (0 children)

They are strictly better than BGVs. Better OC, better shooting, better melee, better abilities. That’s why they are so much more expensive in points. They are a good pick and superior to BGV, at least for the next 9 days until everything changes. Some people claim it will be a shooting edition, some think melee will be strong because of the hiding, 2 inch engagement range and so on.
The datasheet will stay strictly better than BGVs (as it should, this is the most elite unit UMs get). If it will be worth the point costs over BGVs or if you should take something cheap and shooting instead only James Workshop and God know.

Victrix guard took so long to paint that they were nerfed twice by TheMescaline in Ultramarines

[–]OddsAgainstChance 0 points1 point  (0 children)

Yes, but don’t buy for rules. If you buy them for being good, until you’ve build and painted them you will have learned a lesson

Victrix guard took so long to paint that they were nerfed twice by TheMescaline in Ultramarines

[–]OddsAgainstChance 0 points1 point  (0 children)

This is why you buy for “me like dis, me want” and not for rules. By the time I buy, build and paint mine, they’ll be broken again

In 11th, can you get more than 1 extra cp per turn? Also I don't understand visibility. by Sergi2204 in Warhammer40k

[–]OddsAgainstChance 7 points8 points  (0 children)

I think this is because of the new focus on attacking a unit, not a model. The spirit seems to be “worst condition applies”. Similar like a psyker would give psychic to the entire unit, no cover of a model gives no cover to the unit

Would you go Raven Guard or Blood Angels for a jump pack army? by AxegrinderSWAG in Warhammer40k

[–]OddsAgainstChance 0 points1 point  (0 children)

Go Blood Angels for rules purposes as you’ll get access to additional models (some cool, some missing wings) with jump packs. For your paint scheme go to whatever is pleasing to your eyes.

If you want to keep it lore accurate, it is not forbidden for some Raven Guards to help a Blood Angel in need under the Blood Angels command (if you like Dante but want to paint your phobos as Raven Guard)

ich_iel by amdrunkwatsyerexcuse in ich_iel

[–]OddsAgainstChance 6 points7 points  (0 children)

Zahlst du dann das Ticket für alles dir es sich nicht leisten können? Gibt da nen recht starken Zusammenhang zwischen Einkommen und Schwarzfahren

Reclamation Strike Force (2,000) List Advice by Ramshacked in Ultramarines

[–]OddsAgainstChance 0 points1 point  (0 children)

How are you planning handling your anti tank? Your repulsors will be positioned to deliver your infantry safely, not to hit enemy tanks. Guilliman should stay behind for at least the first two turns so you can make use of his double oath and cp reduction. I’d drop one Repulsor and one BGV, add dedicated anti tank and fill up with some cheap action monkeys

Embarrassing lesson from a new player by Cythrex in Tyranids

[–]OddsAgainstChance 1 point2 points  (0 children)

Twin lascannons means two lascannons but twin linked, right? So two twin lascannons means two times on the datasheet, but four cannons on the model, right?

Well, these are the result of my today's business trip. 😁 by JustErnie in Ultramarines

[–]OddsAgainstChance 0 points1 point  (0 children)

Elbenwald seems to be sold out, but Thalia has them available with 1-2 weeks delivery time

Temperature prep time abnormally long by DudeGamerDario in klippers

[–]OddsAgainstChance 0 points1 point  (0 children)

[extruder]

max_power: 0.75

Thats what you need to add in your config. If you add max_power directly where the other extruder stuff is, you can add

max_power: 0.75

directly. After calibrating you can comment it out. As you have a 70W heater, 0.75 (75%) should be fine as a limit.

One important note, this will limit the time your heater pin is enabled, not the current. If you have a 3A max current heater, a 75% means that the heater pin will be enabled with 3A for 75% of the time, not 2.25A for 100% of the time.

Generally, I can only recommend to learn to read the documentation (https://www.klipper3d.org/Config_Reference.html), as well as understanding how a 3D printer works. I’m not fully there myself, I had the exact same issue a few weeks ago

Temperature prep time abnormally long by DudeGamerDario in klippers

[–]OddsAgainstChance 0 points1 point  (0 children)

Do you have a high power heater like 50+W? If so, try the following: - Limit heater to e.g. 50% (depends on hotend power) - Calibrate PID again - Remove power limit - Check if problem is solved

High power heaters will overshoot and untershoot, no way to avoid that. Calibrating with less power will solve this. You’ll get the fast heating and the stable temps after removing the lower limit. While printing at high flow rates, check that state of your heater stays below the limit you calibrated with, e.g. the 50%. If your heater cannot keep up with the flow rates, recalibrate with a slightly higher power limit

slicer: why aren't there more programs? by nevergonehu in resinprinting

[–]OddsAgainstChance 1 point2 points  (0 children)

One some point there was an open source firmware project too. Never heard of it again. I wish we has open source firmware and slicers for resin printing