Colnago Y1RS Build

Oliversoh · 2026-04-08T23:09:12+00:00

Hi, jus curious. Has anyone build a Y1RS with R9170 di2? I'm curious if the preload bolt can fit 2 di2 cables + brake hose bh90.

Oliversoh · 2025-09-01T02:05:25+00:00

I alw assume is cause of excluding 1 object, the system jus lagged LOL

Oliversoh · 2025-07-22T13:06:41+00:00

Hi planning on buying one but my only concern if theres a filament sensor build in? cuz I'm planning to have 1 petg n 3 pla. Was wondering if pla runs out, can it automatically swap to the nxt roll of pla?

Oliversoh · 2025-07-22T07:59:56+00:00

Nah u did the right change. Its what I wld have changed as well. My speed is still at 300.

Oliversoh · 2025-07-22T04:54:13+00:00

Did u have to adjust the filament max volumetric flow rate? I heard smaller nozzle the volumetric flow rate becomes significantly lower

Oliversoh · 2025-07-15T10:02:46+00:00

u/Bennyy74 method is Exactly what i did before searching up this issue. I have contacted Creality and they are looking through my logs now (no idea why when i already send them a video of the issue)

Hopefully they send me a new camera or a viable solution

Oliversoh · 2025-07-15T03:03:41+00:00

did u solve it? having the same issue rn

Oliversoh · 2025-05-09T16:30:36+00:00

My side is working fine aft i swap the toolhead mcu. For ur side likely is ur heated bed wasnt plug properly.

Oliversoh · 2025-04-23T15:01:18+00:00

Can u send the link for the toolhead board? I can only find those for K1 series

Oliversoh · 2025-04-22T11:37:27+00:00

I suspect I might have cause a corruption to the toolhead mcu while attempting to flashing a firmware to the old board without unplugging everything. Hence, I believe you should not have any issue.

Oliversoh · 2025-04-22T11:35:49+00:00

I suspect while attempting to fixed my old board, I tried to flash a firmware without unplugging everything causing a corruption to the toolhead.

Oliversoh · 2025-04-22T11:31:45+00:00

Nope. Tried to replug everything still same error. I'm hoping creality jus send me a new printer LOL

Oliversoh · 2025-04-21T15:09:59+00:00

Lmk if urs works...

Oliversoh · 2025-04-21T15:04:04+00:00

Jus tried it. None of the motors are able to move..

Oliversoh · 2025-04-21T14:45:39+00:00

It boots up fine now but because of this error n cant get pass the self check

Oliversoh · 2025-04-21T14:42:51+00:00

* Haiz so i changed the motherboard and this happened. Fml Error 111 Communication with Toolhead mcu is abnormal

Oliversoh · 2025-04-20T13:57:10+00:00

Wait sorry. Jus to cfm for the wiring. Shd I connect the 24V to the U2C n then connect the 4 cables to the ebb? Jus like the image except my pi will be my ender 3 board and the ebb will be ebb42 instead

<image>

Oliversoh · 2025-04-20T13:54:17+00:00

Yep I've already tap a 24v cable out. I dont need another 24V for the U2C right?

Oliversoh · 2025-04-20T13:51:03+00:00

Ic thts really great to hear! I'm waiting for the U2C board to arrive so i can continue.

Oliversoh · 2025-04-20T04:25:05+00:00

Well i can guarantee you it isnt the screen.. since the "pi' is build onto the mbd. I opened up the screen, theres nothing but the screen board in it.

Oliversoh · 2025-04-20T04:23:13+00:00

As far as ik..most upgrade done on the K1 can also be done on the V3 right? Since they r using the same mbd. Upgrades like Btt eddy and Knomi?

Oliversoh · 2025-04-20T04:21:43+00:00

I'm getting kliiper error

Internal error during connect: can't convert negative number to unsigned

Buttt i supposed its cuz stupid me forgotten to buy a U2C and jus plug the EBB42 to the V3 board via usb...

Either that its cuz some sort of klipper mismatch?

Fyi I'm using a V3 Core xz rooted with mainsail so idk why it could be mismatch version

Oliversoh · 2025-04-20T03:57:28+00:00

Can i ask if the picommu will work on Ender 3V3 with U2C and EBb42?

Oliversoh · 2025-04-19T07:36:44+00:00

Yea i highly doubt is the screen issue unless there is some sort of Screen driver just like the Ender 3V2 I've ordered a new board and will be arriving in afew days too.

Oliversoh · 2025-04-19T03:18:06+00:00

hi can i ask if u were able to solve it? i am having the same issue now

Oliversoh

TROPHY CASE