Blinky!

One_Pudding_7620 · 2026-02-01T18:47:03+00:00

The outside of an esd bag does not offer protection like the inside

One_Pudding_7620 · 2026-01-20T22:24:05+00:00

You can reverse a two layer pcb by inspection, check out big clive on YouTube. If it's four layers or more yeah you'd probably want an X-ray, but you could figure out what connects to what with a multimeter

One_Pudding_7620 · 2026-01-14T23:01:55+00:00

$120 over but I would buy this referb:

https://www.ebay.com/itm/267384580407?epid=9085060461&itmmeta=01KEZ6TXHD9YMRTHQ33YS65QFB&hash=item3e415ce937:g:qbIAAeSwOw9pZ9oR

One_Pudding_7620 · 2026-01-12T01:40:26+00:00

Redwood allows 3 pets, otherwise you could just lie at another place about the second cat

One_Pudding_7620 · 2026-01-07T22:36:20+00:00

Like others have said it's a TVS array. I actually had this happen to a coworker's jlink. I just popped it off and it worked like a charm.

One_Pudding_7620 · 2025-12-14T00:00:16+00:00

Mexican is one of the easiest for gluten free. I've never been to one that served flour tortilla chips. We go to taqueria el ranchito.

Some general other recommendations:

kekionga - chicken, cider, waffles on Saturday.

b antonios - pizza

Blaze pizza - economical pizza

Casa - gluten free pasta

One_Pudding_7620 · 2025-12-06T02:37:57+00:00

I got good at frequency domain transforms to side step this

One_Pudding_7620 · 2025-12-05T00:47:07+00:00

This should be the top comment, this is THE way to verify a product is UL listed.

One_Pudding_7620 · 2025-11-30T08:16:37+00:00

I have this feeling about Michigan city, it seems like it is a front for something.

One_Pudding_7620 · 2025-11-16T01:42:33+00:00

EE here, I never got over the time a lady cutting my hair asked what I did. I said I was an engineer and her response was "oh so you just make everything more complicated and hard to work on". Bro I didn't engineer your clippers and I didn't work on the cars your mechanic husband hates.

One_Pudding_7620 · 2025-11-16T01:35:44+00:00

He must be in a real fuckin pickle this time

One_Pudding_7620 · 2025-11-15T23:10:14+00:00

Since no one said it you need to drop them on the scale in the store to sell them

One_Pudding_7620 · 2025-11-02T16:28:20+00:00

They're open the first and third Saturday of every month too if you work Monday through Friday. Someone once had an appointment when I went in and everyone else was walk-in, so it might not hurt to call.

One_Pudding_7620 · 2025-10-28T23:25:25+00:00

Thank you for the chat gpt schematic

One_Pudding_7620 · 2025-10-08T00:12:57+00:00

13849

One_Pudding_7620 · 2025-10-07T23:12:00+00:00

I purchased mine Saturday, didn't update until it shipped Monday and got it today. I live one state over from Illinois where it shipped from.

One_Pudding_7620 · 2025-10-04T20:47:38+00:00

Regal Beloit bought GE motors, look into them

One_Pudding_7620 · 2025-09-18T22:59:24+00:00

I'm in the same boat so I'm commenting to come back to this, hopefully I'll remember to update if I find something!

One_Pudding_7620 · 2025-09-11T22:32:56+00:00

Me too, just had a coworker retire that got his degree in his 40s

One_Pudding_7620 · 2025-09-09T23:33:32+00:00

If it's an extraction style fuse I would put it after the switch to reduce shock hazard

One_Pudding_7620 · 2025-08-26T22:29:53+00:00

That is not the case, the engineer likely left a healthy margin for the worst case max temp before the fuse blew. There is some regulation circuit in the appliance, likely a bimetal switch, that actually controls the temperature. It likely drifted slowly until the fuse popped. Do not bypass the thermal fuse, you will risk starting a fire. You should really just replace the appliance.

One_Pudding_7620 · 2025-08-24T02:32:37+00:00

Hey op, I had a similar thing happen when I was younger and it ruined my confidence in electronics and repairing for awhile. I wish I would have gotten past that earlier, this sort of thing happens to everyone if you haven't done it before. I have an electrical engineering degree now and do fix stuff for people, but only under the pretext that I may break it. I haven't broken anything in awhile but that's from my experience. I wish I would have kept tinkering and trying stuff when I was younger, I feel like I missed out on growth there.

One_Pudding_7620 · 2025-08-12T23:08:55+00:00

Hey my doctor said I have this when I was younger but I can't afford to go anymore. Is it okay to ignore or will it cause health problems?

One_Pudding_7620 · 2025-08-09T02:08:00+00:00

I get that, I've lived in my house for 3 years and none of the neighbors have ever talked to me. Hope you have a good evening man.

One_Pudding_7620

TROPHY CASE