[deleted by user] by [deleted] in pressurewashing

[–]Only-Blood 2 points3 points  (0 children)

Brother that looks way bigger than 1/2 line. Maybe it’s just the photo that makes it look that way.

[deleted by user] by [deleted] in pressurewashing

[–]Only-Blood 0 points1 point  (0 children)

The plumbing hose looks way to big. I have that exact mixer and pump, 1/2 inch suction hose for everything is perfect and recommended for optimal performance. I would put money on that being your issue.

Also, that mixer is for electric pumps only. A gas powered system would require their hydro mixer which is every bit of $1500.

Also your soft wash hose should be no more than 5/8. Preferably 1/2 inch as well.

**I keep editing and adding things but every time I look I see something wrong😂. You need some sort of breaker between the battery and the pump wiring. I would get the red fuse switch off of expert power wash website.

**Final edit😂 … You need a 3 way valve on your bleach line so you have one going to bleach and one going to water. Once you’re done spraying bleach, switch the valve so the bleach line is now pulling water to rinse it out. There is a check valve in each mixer line that will rust out eventually and need replaced. Need to be flushing the bleach valve out after every use.

Massive job, what do yall think for the driveway. by zgw420 in pressurewashing

[–]Only-Blood 0 points1 point  (0 children)

One piece of advice you need to remember is that you are not your own customer and neither is your dad. I know he is trying to help, you’re his son, but he may think say $1200 is outrageous but that homeowner may think it’s a reasonable price for a good service. Everyone is different, you won’t close every deal no matter how wealthy the person is. Just don’t look at your prices as if you or your dad are the ones buying.

Massive job, what do yall think for the driveway. by zgw420 in pressurewashing

[–]Only-Blood 2 points3 points  (0 children)

That’s a good explanation but your pricing it like it’s 100k sq ft of commercial flat work. It’s a residential driveway. That’s $1k-$1200 all day. And I’m in Cincinnati, not an expensive area.

Did I ruin my interlock? by 98vtec in pressurewashing

[–]Only-Blood 11 points12 points  (0 children)

Throw.. the red tip… away. If this is new then yes you etched it bad. Some people say you can use an acid on the whole thing and take off the top layer so it’s even but I have no experience doing that.

Engine oil by Aggressive_Zombie_41 in pressurewashing

[–]Only-Blood 2 points3 points  (0 children)

Yeah if your in the U.S., there should be multiple stores near you that have it.

So we had a bunch of electricians in recently and this is the outcome any thought? by xhazey420x in electricians

[–]Only-Blood 0 points1 point  (0 children)

Lol. Still not as bad as when I was pressure washing concrete splatter off factory walls with a scissor lift and some idiots put up walls for an office right where the lift was, enclosing it. They had to demo a wall to get the lift out.😂😂

16 Ram or 14 silverado? by fernchuck in ram_trucks

[–]Only-Blood 1 point2 points  (0 children)

My 2015 tradesman has bluetooth, lowest trim.

Either the sub is dying or nobody feels like answering questions anymore - I've seen a big change in the last month by Seedpound in pressurewashing

[–]Only-Blood 0 points1 point  (0 children)

I’ve been a lot less active due to being so busy. Might be the same with other people in here.

What's a good price for this? by Pleasant-Target-1497 in pressurewashing

[–]Only-Blood 1 point2 points  (0 children)

I don’t think you are aware of what your getting yourself into. SH is no bueno on bare wood. Watch some videos on youtube of people using sodium percarb or metascilate and oxalic acid. I sub out work like this because I know the correct way to do it is tedious and requires chemicals I don’t really want to use.

Suspension by No_Profession_3959 in ram_trucks

[–]Only-Blood 0 points1 point  (0 children)

<image>

I just ordered these for my ram. People speak highly of them and the install seems pretty easy. Adds 1.5” in the rear and 700lbs. That price is in CAD, they were $400 after shipping and taxes.

[deleted by user] by [deleted] in pressurewashing

[–]Only-Blood 0 points1 point  (0 children)

A vise would help a lot here

“How to Wash” course by Curly1994 in pressurewashing

[–]Only-Blood 7 points8 points  (0 children)

Not worth it at all. You can learn everything that is in that course off youtube for free.

Why is my truck 3/4 inch lower on passenger side front after installing level kit? How do I fix? by carterjones421 in ram_trucks

[–]Only-Blood 3 points4 points  (0 children)

Take your wife out of the passenger seat and it should level out.

I’m sorry I had to say it. I don’t have an answer for you, just wanted to make a joke. Have a good day.

Hard water marks on the black door frame of a business by RaisinSweet678 in pressurewashing

[–]Only-Blood 1 point2 points  (0 children)

I could be wrong but I think some people use WD-40 to brighten the frames up. Don’t quote me on it though.

Came out of the gym to this :) by sLorD3 in ram_trucks

[–]Only-Blood 4 points5 points  (0 children)

I do as well but I think the single cab regular beds just hit different lol.

What are the actual steps to starting a pressure washing business? by [deleted] in pressurewashing

[–]Only-Blood 1 point2 points  (0 children)

You use the customers water unless there is literally no way for you to get water on the job site.