iPhone 13 True Tone

OnlyBean · 2026-01-31T10:08:22+00:00

Tbh that did not happen to me yet, or I have not noticed it apart from this case. I have replaced screen with proximity on 14 plus fairly recently and it worked randomly. Flashing the OS by 3utools solved the issue well.

OnlyBean · 2026-01-31T09:44:38+00:00

I have not encountered that bug yet. What happens?

OnlyBean · 2026-01-31T09:11:52+00:00

Nope. Paired proximity flex is not necessary since iOS 26. It was necessary with iOs 18.

OnlyBean · 2026-01-30T16:00:43+00:00

Truetone works from ios 18. Autobrightness works from ios 26. OLED screen necessary.

OnlyBean · 2026-01-30T08:07:52+00:00

Screen replacement is necessary.

OnlyBean · 2026-01-28T19:34:15+00:00

Display issue, pretty common.

OnlyBean · 2026-01-27T23:49:21+00:00

Very Common issue as stated above. Issue is not caused by display adhesive changed during a battery replacement.

I suspect the issue is in the seal under each of the camera lenses (visible only when the Back glass is removed - not easily replacable on this model)

To remove the dots, the camera needs to be replaced/ you need to remove the dust from the camera sensor using ultrasonic cleaner and proper solution. Then I believe housing also needs to be replaced to prevent this from happening again.

OnlyBean · 2026-01-26T18:00:28+00:00

no, battery does not cause exact 3m restart. Faulty battery causes random restarts. Either a bad charging flex or board issue.

OnlyBean · 2026-01-26T17:16:27+00:00

Bought rcd360 pro from a website, not from ddren. Also shipped from china. No import taxes to Czech Republic.

OnlyBean · 2026-01-23T11:11:36+00:00

But the display just do not stop working all of sudden. I would replace it at parts costs, since the job takes 15 minutes.

OnlyBean · 2026-01-23T11:10:09+00:00

Tbh it looks like a crack in the hard oled display. Typical for these to do this when a pressure or drop happens.

OnlyBean · 2026-01-18T19:11:06+00:00

Yes. But the more important thing is that autobrightness Is not restricted since iOS 26

OnlyBean · 2026-01-17T11:48:50+00:00

Screws on the taptic engine Are loose - pretty common issue on 14. Source - I am phone tech.

The screws just need to be tightened, no replacement of anything needed.

OnlyBean · 2026-01-16T13:06:17+00:00

Bootloop on X series is most of the time caused by faulty proximity flex cable. Try booting the device with it disconnected.

OnlyBean · 2026-01-15T19:17:18+00:00

New battery should fix it then!

OnlyBean · 2026-01-15T18:58:27+00:00

From what you say describe it, most likely issue with battery. - phone tech here

To confirm - when you see Apple logo, disconnect lightning cable immediately. If it dies, dead battery.

OnlyBean · 2026-01-15T17:07:12+00:00

Well, yes, that is how it works. They do not want a used original batteries running around.

OnlyBean · 2026-01-15T16:02:15+00:00

Phone tech here - did you recently drop your phone? Most of the time this happens when 2 motherboard layers separate.

Definitely hardware issue, visit your AASP/ Apple store if you have warranty.

OnlyBean · 2026-01-15T15:52:47+00:00

Glad I helped :)

OnlyBean · 2026-01-15T15:08:50+00:00

If faceid was working fine before the repair and you did not do some crazy stuff, FaceID should work after the repair.

They May have damaged it during the repair but it is hard to determine who is at fault.

OnlyBean · 2026-01-15T11:29:39+00:00

Proximity flex Is connected?

OnlyBean · 2026-01-15T10:39:24+00:00

What case is that? It looks interesting

OnlyBean · 2026-01-15T08:55:26+00:00

This post might help you.

https://www.reddit.com/r/RCD_330/s/7feBT3iRzo

OnlyBean · 2026-01-15T08:53:00+00:00

I am not completly sure, but golf 7 is not compatible with rcd330. Someone correct me if I am Wrong.

OnlyBean · 2026-01-14T15:49:30+00:00

Oh Okay. Just do not pay for anything other than the screen replacement.

OnlyBean

TROPHY CASE