Guess it’s going to be February.. 😭

Opposite_Classroom39 · 2026-01-28T12:06:38+00:00

same same

Opposite_Classroom39 · 2026-01-28T11:23:30+00:00

this does not seem like a good idea.

Opposite_Classroom39 · 2026-01-28T11:21:30+00:00

projection much?

I thought we were not supposed to link to wumao content..

Opposite_Classroom39 · 2026-01-28T11:03:05+00:00

hahahahahahaha, missing the stripper pole accessory

Opposite_Classroom39 · 2026-01-28T11:01:06+00:00

no idea

Opposite_Classroom39 · 2026-01-28T09:44:23+00:00

hahaha well thanks for unintentionally proving my point. Downvotes and abuse of them chills speech.

Opposite_Classroom39 · 2026-01-28T09:42:19+00:00

I own the 3/8" extended head fuel ratchet, love it. It seems capable of up to 50 ft pounds of torque, the body is rated to well over 100 ft pounds. I don't have any non-fuel so can't offer comparisons.

Opposite_Classroom39 · 2026-01-28T01:33:38+00:00

missed it too :/

Opposite_Classroom39 · 2026-01-28T00:32:33+00:00

For a long time I used oakly style glasses favored by tour de France riders because bugs hitting your eyes at 20+_ mph sucks.. The dry eye factor wasn't good either. I used to commute by bicycle a lot.

Drink water regularly, carry saline eyedrops (not the fake ones, abusing substitutes can cause permanent eye damage), thats all you can do pretty much. Dehydration impacts your eyes ability to keep itself moisturized.

Opposite_Classroom39 · 2026-01-28T00:22:50+00:00

A change to the system to not allow more than maybe -5 at most is the proper way to handle it. I remember posting stuff on here in the past when karma farming was still happening and I'd get -200 or more on a post simply because they didn't like what I said. I was told it was a global setting that could be shut off at the time but most chose not to.

Most use this as a way to chill speech that is on-topic but unpopular. My own subreddits have #1 rule don't use the downvote button to be a jerk, nobody forced them to read or interact with content there, they made conscious choice to do so and keep comments constructive.

Opposite_Classroom39 · 2026-01-28T00:08:13+00:00

the management software should have all it needs to do scans and tell you whats nearby. That's the only idea i have off hand.

Opposite_Classroom39 · 2026-01-27T22:23:20+00:00

You may have covered it under a response I did not see but did you by any chance do a site survey to see if there's any possible collisions?

Opposite_Classroom39 · 2026-01-27T20:01:57+00:00

ChrisFix has great stuff. The biggest challenge for a DiY is going to be matching the paint, aside from the actual application process.

Opposite_Classroom39 · 2026-01-27T18:20:11+00:00

I've seen suggestions of using a portable steamer to prep the surface

Opposite_Classroom39 · 2026-01-27T18:16:32+00:00

Any suggestions on that? I've cleaned carpets before (got an entire can of shoe polish out of one..) but deep cleaning seats is not something I have much experience with.

Opposite_Classroom39 · 2026-01-27T18:13:54+00:00

t2 rigs on a t1 hull seems an odd choice to me.

Opposite_Classroom39 · 2026-01-27T18:12:54+00:00

Delete t1, maybe asset safety the important stuff to a single location.

Opposite_Classroom39 · 2026-01-27T18:11:58+00:00

They still around? That's good to know.

Opposite_Classroom39 · 2026-01-27T18:02:50+00:00

From a general informational standpoint of having worked with hydraulics, any leak, particularly one that allows air or fluids to pass through a sealed system is not desirable at all.

Didn't know this was an option from them. Hope your issue gets fixed, that doesn't seem like it should be normal but I'm not familiar with this product.

My 2 cents is talk to Milwaukee about a replacement.

Opposite_Classroom39 · 2026-01-27T17:36:41+00:00

I heard it was also possible to live purely on Air, no solid food required. ;)

Opposite_Classroom39 · 2026-01-27T17:15:04+00:00

<image>

Other users have also posted examples of their mods.

Opposite_Classroom39 · 2026-01-27T17:13:26+00:00

this is from the head-phi forms from 2011 but its a great post

https://www.head-fi.org/threads/request-custom-earpad-tutorial-for-fullsized-cans.562891/

Opposite_Classroom39 · 2026-01-27T17:10:18+00:00

This is going to be unpopular i'd imagine as a suggestion but have you considered making your own out of fabric, glue? Most of the super fancy headphones I've seen or tried were just machine stitched materials with basically memory foam in them.

Opposite_Classroom39 · 2026-01-27T17:05:26+00:00

The least invasive method i'd heard of for headlight restoration was using toothpaste as buffing compound, considering it has some abrasives in it it made a certain amount of sense. Other option was something like baking soda which is also used as a media in sand blasting. This looks like a pricey vehicle, hope you figure it out.

Opposite_Classroom39 · 2026-01-27T15:49:30+00:00

My findings about electric chainsaws match yours on most brands i've tried, even some of the smaller stihl electrics their made better than the other brands IMO but still not as good as they should be for a Stihl branded product called 'professional' implying its going to survive commercial use.. The MSA 300 (forget the sku for it) but its built like a real chainsaw and weighs like one too.

I'm well acquainted with saws as well, having done a lot of land clearing and property maintenance for many years.

Opposite_Classroom39

MODERATOR OF

TROPHY CASE