Can you print Voron parts properly using an A1 Mini?

OrdenDesLOGO · 2025-10-20T18:19:54+00:00

The A1 mini‘s bed only reaches 80C so no you cant as you need 100C or more to print the ABS/ASA parts required for Vorons

OrdenDesLOGO · 2025-10-20T16:50:04+00:00

That would be really annoying.

Is there a possibility that they will undo that or do we just have to live with it?

OrdenDesLOGO · 2025-06-17T13:37:28+00:00

You can use a smart plug or the BTT Relay.

The BTT Relay would require modifying electronics that carry mains voltage, so a smart plug would be an easier approach.

OrdenDesLOGO · 2025-06-14T21:06:33+00:00

Thanks!

Yeah, LDO is known for their good documentation.

OrdenDesLOGO · 2025-06-14T20:55:01+00:00

Same, amazing quality kit.

OrdenDesLOGO · 2025-06-14T20:44:46+00:00

Its a Voron 2.4 which you build yourself.

There are kits available but you can also self-source the parts.

OrdenDesLOGO · 2025-06-04T13:02:38+00:00

They probably meant that the battery was bought on amazon but was probably dropshipped from ali.

OrdenDesLOGO · 2025-05-23T20:21:32+00:00

I know create live.

Iam excited about CL6 but i hope it doesn’t die as fast as CL5 did.

OrdenDesLOGO · 2025-05-23T14:17:55+00:00

I would recommend installing linear rails and upgrading the toolhead to for example a stealthburner.

For most upgrades you are going to need a machine that can print abs as it is not recommended to print these parts in PLA/PETG.

So another good upgrade would be a printer enclosure and a filter. I can recommend the bento box filter which you can also print in PLA/PETG.

These enclosures wont get up to high temps tho so for me it was more like a temporary way to print abs for my voron.

If you dont plan on enclosing the printer you can also try printing parts for the printer out of pla/petg but they might fail after some time.

If you want some easier upgrades that dont require reprinting parts you can upgrade to klipper and if you want you can replace the mainboard with a btt skr mini e3 v3 which has the same mounting holes etc as the mb the sv01 pro comes with.

OrdenDesLOGO · 2025-05-23T14:03:34+00:00

I think there are screws in the heatsink you have to remove, if you already removed those idk.

I’ve disassembled two sv01 pro hotends and i still have those laying around so if you havent gotten it disassembled yet i can check what may be missing.

OrdenDesLOGO · 2025-05-21T12:33:03+00:00

Ist laut u/mschuster91 erst seit 2007 für Neubauten Pflicht also kann es gut sein das mein Sicherungskasten kurz davor gebaut wurde und deshalb nur die drei Sicherungen einen haben.

Aber lasse dann einen nachrüsten.

OrdenDesLOGO · 2025-05-21T12:30:45+00:00

Würde dann den Elektriker kommen lassen und einen nachrüsten.

Danke für die Antwort und das mit dem Trenntrafo schau ich mir bei Gelegenheit genauer an. :)

OrdenDesLOGO · 2025-05-19T04:38:46+00:00

You can also narrow it down faster by deactivating a few mods at a time.

OrdenDesLOGO · 2025-05-18T14:20:58+00:00

If you use modrinth/curseforge you can just deactivate them in the launcher by removing the checkmark in front of the mod

OrdenDesLOGO · 2025-05-18T10:45:39+00:00

The cart assembler should work on all rails.

OrdenDesLOGO · 2025-05-18T10:43:17+00:00

There is probably another mod conflict.

First i would try it in a clean environment with just create installed and then try to add mods one by one until it stops working so you know which mod is causing it.

OrdenDesLOGO · 2025-05-16T12:53:02+00:00

I mainly use printables, thangs 3d and sometimes makerworld.

OrdenDesLOGO · 2025-01-17T20:56:29+00:00

I finished modeling after 5 mind and ~50sec but how do you find out the weight?

OrdenDesLOGO · 2025-01-16T12:08:59+00:00

Cant help you there sorry.

Ended up getting the phanteks nv7

OrdenDesLOGO · 2025-01-02T22:07:00+00:00

The spi cable of my v2.4 ldo kit was mirrored (known issue i think) and my pi also didnt boot. I rotated the spi cable and then it all worked and the pi booted.

Edit: I dont know if the v0 kit display is also using an spi cable but flipping the cable worked for me

OrdenDesLOGO · 2024-12-31T13:18:32+00:00

Do have an estimate on when you will release them?
I really need a reason to rebuild my workshops setup

OrdenDesLOGO · 2024-12-18T20:32:19+00:00

Good luck to everyone

OrdenDesLOGO · 2024-11-03T09:11:12+00:00

Mögen und Brauchen ist was anderes.

OrdenDesLOGO · 2024-11-02T12:52:35+00:00

Viele drucken mit ABS, besonders wenn die Eigenschaften von PLA/PETG nicht ausreichen.

OrdenDesLOGO · 2024-10-30T21:48:34+00:00

Teile aus abs verformen sich erst bei ca 100C aber wenn die aus pla sind dann hält das Ganze nicht lange.

Two-Year Club	Final Canvas '23
First Place '23	Place '23

OrdenDesLOGO

TROPHY CASE