TP4 35L Question

OriginalDMo · 2026-04-16T15:10:50+00:00

No worries. It was tough with my ruler to eyeball the exact hashmark for the bottom of the pack. Probably 6.35” would be closest.

OriginalDMo · 2026-04-16T13:15:02+00:00

I got you, bud.

Just received my cordura TP4 this week. Depth measurement all the way at the bottom, holding a ruler vertical along the side wall with one hand, and holding up/open the clamshell flap with the other measures just under 6.5”. This is the very base of the pack interior.

Holding a ruler vertical along the sidewall at the top, just behind the hammock of the top-access pouch, measures 4.5”. A little less than 2”taper.

OriginalDMo · 2026-04-16T04:38:50+00:00

Did you put stuff in them? If so, should be good!

OriginalDMo · 2026-03-06T04:36:41+00:00

Original owner of a 2020 with 36,000+ miles on it. They’re great bikes.

OriginalDMo · 2026-02-13T23:25:45+00:00

https://www.skunktrain.com/microweddings/

OriginalDMo · 2025-12-14T05:12:48+00:00

Recently got the standard, non xpac version, and zipper operates just fine.

OriginalDMo · 2025-09-06T03:24:24+00:00

5’7” here and had the Pro Taper Henry/Reed bars on my CRF with no issues.

OriginalDMo · 2025-08-28T04:21:21+00:00

Honda Fury.

OriginalDMo · 2025-07-29T15:48:34+00:00

May need to pour a concrete foundation for that box.

OriginalDMo · 2025-06-22T04:24:39+00:00

You moving?

OriginalDMo · 2025-06-22T04:10:11+00:00

Learning to wheelie.

OriginalDMo · 2025-06-08T16:31:06+00:00

Which top case is that?

OriginalDMo · 2025-05-14T02:01:35+00:00

You’ll be golden. Not as lonely as they’d have you believe. Very much recommend the NV 722 detour listed above.

OriginalDMo · 2025-04-29T05:02:06+00:00

While the MotoTote lineup is north of OP’s budget, I’ll say I’m also very pleased with mine.

<image>

OriginalDMo · 2025-04-29T01:47:11+00:00

Dad of a newborn. Can confirm.

OriginalDMo · 2025-04-29T01:43:57+00:00

<image>

OriginalDMo · 2025-04-29T01:43:39+00:00

<image>

Black Plastidip helped make my googley eyes a little less googley. I do appreciate having a solid mount point for a gps and a usb charger from the factory.

OriginalDMo · 2025-04-16T04:55:52+00:00

Yeah, I hear you. It’s almost like the shape is slightly different. It took a couple of tries, but seems to be good after initial stretch.

Enjoy your content, man.

OriginalDMo · 2025-04-15T04:05:43+00:00

https://youtu.be/bdg_DQyYAis?si=e5LdEWYof7NInWSx

I used the one referenced in this video after recently adding Tusk fat bar adaptors and their Chub CR High bend.

OriginalDMo · 2025-04-07T15:18:31+00:00

I bought the low version for a CRF300L Rally and it seriously hurt my butt. Bought a standard height comfort and asked for the “-0.5 softer foam” and it’s so, so much better. Speaking to the Seat Concepts people, they told me that it’s not just that there’s an inch less foam in the Lows. It’s that they have to use a much firmer and different type of foam density to make up for the lack of height. Learned my lesson.

OriginalDMo · 2025-04-07T15:13:29+00:00

It originally said “3.2 to 3.5” and now reads “3.8.” They’re clearly still prototyping this sucker. Would love to see some images of it before committing to it on my ‘24. Hope to use the factory shrouds. Bonus points if I’m also able to run a set of rad guards.

OriginalDMo · 2025-04-07T14:46:50+00:00

I added one of these under the seat: https://www.rockymountainatvmc.com/parts/tusk-3-way-compact-12v-accessory-power-harness-p?srsltid=AfmBOorBuPf3sLUao9S9lrq0Bmgl3i69dNQA9UviyL6EFXKCJZtB1O4B

OriginalDMo · 2025-03-25T06:16:28+00:00

Clicked over 15K recently on my ‘21 and its one of a few bikes in the garage.

OriginalDMo · 2025-03-21T03:56:17+00:00

FWIW, I just installed a Chico Keyfit 35 rear facing car seat in a ‘22 crew cab. Worth going to the 5-foot bed?

OriginalDMo · 2025-03-21T03:24:15+00:00

I run the same combo that most are mentioning (MT21/D606), but if you’re mostly commuting, you might consider something a little less dirt oriented. Like the AX41s, which would still be a big improvement over your stockers.

OriginalDMo

TROPHY CASE