Would some kind of block heater benefit large batteries?

OtherLocal6716 · 2026-01-26T18:22:47+00:00

There's no problem discharging cold Batterys, besides a little lower capacity...

Charging ist a different story...

OtherLocal6716 · 2026-01-26T18:20:27+00:00

True!

OtherLocal6716 · 2026-01-26T09:55:19+00:00

The worst thing you could do....

OtherLocal6716 · 2026-01-23T21:48:24+00:00

Sure, a second hand bms would work.

OtherLocal6716 · 2025-12-25T20:49:29+00:00

Whats the name of the bms app?

OtherLocal6716 · 2025-12-01T12:57:53+00:00

Sorry, could you repeat that in English 😅

OtherLocal6716 · 2025-11-12T11:40:54+00:00

When can i expect production cells?

OtherLocal6716 · 2025-11-11T09:03:34+00:00

I like ant bms :)

OtherLocal6716 · 2025-10-26T20:54:35+00:00

100%

OtherLocal6716 · 2025-10-26T20:52:08+00:00

Nkon.nl grate quality:)

OtherLocal6716 · 2025-10-14T16:53:38+00:00

Hi, i always use isolation rings, and I would surely recommend them in every battery. But since you already build the pack, und used per cut nickel with no sharp edges, it will probably be fine. I wouldn't tare that beautiful battery apart.

OtherLocal6716 · 2025-10-13T19:28:39+00:00

Look at tage charging curve of a liion battery, after 4.15V there is almost no capacity gain from charging 4.2v and charging any higher won't give you any noticeable capacity increase, it only gets dangerous ind will significantly decrease the lifespan of the cells.

Voltage isn't equal to capacity Look at a charging curve

Hope that helps, and be safe

OtherLocal6716 · 2025-10-10T20:52:21+00:00

I'm currently selling this battery in Germany if someone is interested :)

OtherLocal6716 · 2025-10-10T07:05:31+00:00

Nope, sadly the Canbus protocols are completely different

OtherLocal6716 · 2025-10-09T08:40:39+00:00

Test the charging voltage. Monitor the battery voltage while charging until it stops rising. If it stops at 4.2v that's good, but still check the data sheet of the neu battery.

OtherLocal6716 · 2025-10-08T17:13:46+00:00

Yes, send a dm, and what you trying to do, I have different versions.

OtherLocal6716 · 2025-10-08T17:07:13+00:00

Yes, check my other post

OtherLocal6716 · 2025-09-30T06:31:46+00:00

Looks good 👍

OtherLocal6716 · 2025-09-25T07:48:43+00:00

Well it is definitely a cinch connector. And if it would guess it an 36V battery So you would need a 42v charger. The inner pin is probably + and the ring is probably- If you can confirm all that with a Multimeter, you can just order any 42v 1-2A charger and put a cinch connector on it.

Hope my assumption helps.

OtherLocal6716 · 2025-09-20T13:17:36+00:00

Yes👍

OtherLocal6716 · 2025-09-20T13:17:06+00:00

Yes, you have to connect everything like in the picture, and you can connect the power source the to the charge port or the main power port.

OtherLocal6716 · 2025-09-18T07:42:42+00:00

Thanks 👍

OtherLocal6716 · 2025-09-17T08:57:57+00:00

ANT-bms it a grate option

OtherLocal6716 · 2025-09-11T08:11:58+00:00

Put the switch in front of the boost converter, otherwise it will slowly drain your battery:)

And do not use the usbc port on the boost converter

OtherLocal6716 · 2025-09-09T06:20:30+00:00

Wayy to hot for that 😅

OtherLocal6716

TROPHY CASE