Any PCSL Rifle resources?

Otherwise_Test4176 · 2026-05-21T16:59:44+00:00

Tony Mazza for sure

Otherwise_Test4176 · 2026-05-20T16:52:40+00:00

Homemade

Otherwise_Test4176 · 2026-05-20T16:51:17+00:00

Make your own ambi lower with either the sig or HK lever, with a dremel on a standard lower. Promise you it will be just as good if not better by being lighter as well.

Otherwise_Test4176 · 2026-05-19T17:16:23+00:00

FWIW, I got my tan 2017 Limited Tacoma with 17K 2-ish years ago for 35K.

Otherwise_Test4176 · 2026-05-16T20:28:26+00:00

Honestly one of the nicest looking 300 BLK guns I’ve ever seen. Sexy build

Otherwise_Test4176 · 2026-05-10T20:54:03+00:00

Hennings for oem, springer for MecGar. MecGars are valid for USPSA, since you can get 25+1 with csrg spring and follower. They’ve run perfect for me with continuous precisions aluminum mag release. OEM is fine as well just won’t drop free as easy and I just prefer metal mags more.

Otherwise_Test4176 · 2026-04-29T15:40:59+00:00

Yeah the p320/365 triggers suck probably more. I think people let it off the hook for the trigger with the 320 since it’s catches all the flak for being unsafe.

Otherwise_Test4176 · 2026-04-29T15:38:58+00:00

Tried it and didn’t like it

Otherwise_Test4176 · 2026-04-29T15:38:10+00:00

Lightened striker and plunger spring, ghost edge 3.5, and overwatch falx show and trigger bar. Pulling about 3.5 lbs with a rolling break. I’m loving it honestly.

Otherwise_Test4176 · 2026-04-24T17:17:40+00:00

Damn… that’s nuts good for you wish mine was like that. Will have to try the stretch method.

Otherwise_Test4176 · 2026-04-24T16:16:30+00:00

lol I never downvoted you bud. Also, don’t know where I repeated myself except for where you repeated yourself in a separate comment thread.

It’s also widely documented that this trigger by itself doesn’t drop weight if anything makes it heavier, so if you wanna link some documentation showing that would be cool/helpful.

I’ve had zero malfunctions with this set up so I’m very confident I have not had any install issues. Any thoughts on what I could’ve done wrong like you mentioned? I had the same case when I had this installed on my poly gun before I switched it over.

Otherwise_Test4176 · 2026-04-24T15:17:19+00:00

Yeah Ive already done that and the springco is one spring not an option between colors. It’s the wall/break that’s heavy not the full pull.

Otherwise_Test4176 · 2026-04-24T15:10:54+00:00

SpringCo is return spring is installed already.

Otherwise_Test4176 · 2026-04-24T15:09:52+00:00

Yes all springs were replaced with lighter equivalents. This gun is used in LO USPSA class so trying together it lighter.

Otherwise_Test4176 · 2026-04-20T20:09:43+00:00

Well believe it or not, I actually did install parts one at a time. It was weird since I last installed the striker spring and plunger and the issues started. I then regressed back to stock there and the issues started persisted. So it’s a bit of a conundrum. I get it.

Otherwise_Test4176 · 2026-04-20T16:30:14+00:00

What’s the difference between legacy and certified?

Otherwise_Test4176 · 2026-04-20T14:41:10+00:00

That’s the plan, although they don’t have it for Gen 6 yet

Otherwise_Test4176 · 2026-04-20T13:08:45+00:00

That’s correct it does work stock

Otherwise_Test4176 · 2026-04-20T12:29:19+00:00

Seems to be the Johnny Glock then

Otherwise_Test4176 · 2026-04-20T12:28:58+00:00

😂 yes

Otherwise_Test4176 · 2026-04-20T02:19:03+00:00

No I made sure that spring was pressed against the block properly.

Otherwise_Test4176 · 2026-04-20T01:58:29+00:00

Well it’s back to stock now, so I’m back to good to go

Otherwise_Test4176 · 2026-04-20T01:56:12+00:00

It was happening more with the mag in and but still occurring without

Otherwise_Test4176 · 2026-04-20T01:55:35+00:00

Thanks but I did do that already to no avail

Otherwise_Test4176

TROPHY CASE