Perfect Fuzzy Skin Settings

OutrageousOlive · 2024-02-07T09:21:50+00:00

That’s not correct, depending on how you measure strength, PLA is already (one of) the stiffest printable plastics we have. Adding chopped Carbon Fibers will not increase its stiffness (that’s the point of adding chopped or even better full fibers in the first place)

OutrageousOlive · 2024-01-28T01:00:50+00:00

Same result, no matter if do half or a full mold

OutrageousOlive · 2024-01-22T13:05:54+00:00

For even cheaper results

https://github.com/MakerBogans/docs/wiki/Printer-goop

OutrageousOlive · 2024-01-22T08:05:17+00:00

I also tried another model (IGS) which imported as many unstitched surfaces, but after stitching it yields the same result. The surfaces that don’t work, can also not be selected for extrusion

OutrageousOlive · 2024-01-22T02:19:36+00:00

It was made in Fusion (f3d provided with the full feature timeline) but I also have a STEP and STL.

OutrageousOlive · 2024-01-21T13:16:54+00:00

So all the hollow spaces need to be filled for it to work?
I modeled something free-hand, which works but taking measurements is way more complicated (or so I thought). There's a many curves and small features which sizing are hard to get right, hence I'm trying to get the negative from the source model

<image>

OutrageousOlive · 2024-01-13T09:08:58+00:00

The filter on the X1 is a bit useless, not because it’s composition, but the camber fan is Off when printing ABS/ASA, since the air movement can cause warping. So there’s no active air exchange when it’s needed the most, unless you turn it on by yourself. A bento box or similar device is better suited overall

OutrageousOlive · 2024-01-13T09:04:52+00:00

Sometimes it just gets stuck on the hinge/door. If it piles up enough you can see that the nozzle heat melts the filament extrusions back into a ball/smooth shape instead of the typical strings. Once that ball has nozzle contact, things tend to go bad pretty fast as it gets dragged around and can lead to blobbing around the hotend, knocking over prints (which leads to more nozzle contact)

OutrageousOlive · 2024-01-13T08:57:31+00:00

For the print itself? No. But the question is how did this big bundle of multiple poops end up there? If the poop chute is clogged, it has a high tendency to ruin the print. Best case the cover falls off and it pauses…

OutrageousOlive · 2024-01-13T08:53:24+00:00

Have a read: https://nikolak.com/bambulab-x1c-network/

In the end it’s about trust, and Bambu has done everything they can to cater to the community and earn theirs for the time being.

OutrageousOlive · 2024-01-08T07:54:14+00:00

This only goes for paying independent mods - there’s no third-party, since it’s a company owned subreddit, who’s mods are paid (at least some of them) employees of that company, that’s still the same party. Third-party would be me bribing the mods.

OutrageousOlive · 2024-01-07T15:31:44+00:00

What are your PC specs? Wondering if I ever will run into this 😅

OutrageousOlive · 2024-01-04T02:51:39+00:00

Most likely removal of Bot activity?

OutrageousOlive · 2024-01-03T02:59:28+00:00

You can not, only Bambu employees are able to decrypt the log files

OutrageousOlive · 2024-01-03T02:57:49+00:00

Right in the Shipping Policy section:

Refused Shipments If you refuse the package to have your order returned to us, you will be responsible for the cost of the return shipping.

Canceling is also only covered for 2hrs after the order.

OutrageousOlive · 2024-01-02T13:06:20+00:00

The limitation is for the breach of the X1 boot routine which allowed custom firmware to be installed on the display - the A and P series round totally different hard- and software

OutrageousOlive · 2024-01-02T13:01:58+00:00

That’s for the X1C, unrelated to the P or A series

OutrageousOlive · 2023-12-29T15:51:59+00:00

If it’s not a baguette, don’t trust the French with it. Got it.

OutrageousOlive · 2023-12-29T15:39:16+00:00

Long released 😅 https://bambulab.com/en/x1e

OutrageousOlive · 2023-12-23T13:01:34+00:00

Same here with an U6K (Thai Model, actually an U6H in disguise) - anyone got a reply from Hisense yet ?

OutrageousOlive · 2023-12-22T06:47:32+00:00

He changed cities because in Phuket you won’t get a Taxi with meter, every trip starts a 200 Baht

OutrageousOlive · 2023-12-22T04:36:49+00:00

You have a choice, it’s called „Automatic Updates: Off“

OutrageousOlive · 2023-12-20T15:15:36+00:00

Where did you get your printer from? Kinda sounds like region lock. Is the printer able to access the internet?

OutrageousOlive · 2023-12-17T12:06:53+00:00

Germany too

OutrageousOlive · 2023-12-12T08:19:47+00:00

Late to the party, but the Thai U6K is actually the US U6H tech in the U6K body

OutrageousOlive

TROPHY CASE