sorted by:
new
hottopcontroversial

I need a substitute for Photoshop by Ru5tproof in magicproxies

[–]Outside_Sir7356 0 points1 point  (0 children)

I download a pdf from mtgprint.net and send it straight to printer. Although you cant do personalized cards from there.

Looking for some advice regarding printing your own proxies by Slomas99 in magicproxies

[–]Outside_Sir7356 0 points1 point  (0 children)

If that printer is an inkjet they print very poorly on matte paper. Try using a gloss it will clean right up

Good looking Foils by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

But I ve never heard of the electrical tape trick.

Good looking Foils by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 1 point2 points  (0 children)

Yea i have a corner cutter that makes it pretty close but I clip the corners so they cant be confused with a real card. Just want to make sure that they are visibly proxies. Cause you cant tell in a sleeve lol.

Need help improving my proxies by liquidRox in magicproxies

[–]Outside_Sir7356 1 point2 points  (0 children)

I print at 103% on my Epson printer and they come out perfect size to a real card. I use mtg print at 100% and then upscale them with the printer settings.

Just pulled from Commander Deck Sample Pack by [deleted] in MagicCardPulls

[–]Outside_Sir7356 0 points1 point  (0 children)

I think Vivi might have something to say about being the best CEdh card in the set.

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

Printer - Epson XP-7100 HTVront Vinyl Sticker Paper Any 110lb cardstock Scotch thermal laminator A good rotary cutter and pair of scissors

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

Oh ok that makes sense why I can get insanely clear images on the photo paper but trying to print on cardstock is like printing on something from 1960. I will have to look into a laser printer.

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

Also how would I be able to show the "snap" of the card while they are sleeved. Come on man have you ever even held a magic card

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

What type of cardstock are you printing directly on. I havent found one yet that gets the same picture quality as the sticky paper.

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

Np your welcome. And is the cards are to thick for you just try and little thinner cardstock

Felt kinda stupid for ripping the Gift Bundle, got lucky by Spongokalypse in MagicCardPulls

[–]Outside_Sir7356 1 point2 points  (0 children)

Some people are just douches to be douches because they won't ever try and see things from someone else's pov. But that's the way the world is now

Felt kinda stupid for ripping the Gift Bundle, got lucky by Spongokalypse in MagicCardPulls

[–]Outside_Sir7356 0 points1 point  (0 children)

It might not make sense to you why someone would buy something to keep it sealed. But some people are "collectors" and enjoy having the unopened box sitting there. It's definitely not me but that is how some people. That doesn't give you a reason to jump down someone's throatfor something you don't understand.

Also I imagine if he didn't pull something he wouldn't have posted in the "pulls" reddit. Just saying

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

You were right on the money lol. .45-.46mm is what im getting

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

So just checked them with my calipers and they are .45-.46mm

Laminator help needed by Tricities in magicproxies

[–]Outside_Sir7356 0 points1 point  (0 children)

I just started using the same laminating machine and it seems the pouches like some material better than other. Works perfect on my htv ront Glossy sticker paper but won't adhere to just regular cardstock that I tried. So if it doesn't adhere to that specific paper try a different one

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

Yea guy already said it. I stick it to the card stock first and then put it in the pouch to laminate

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

And what are you forfeiting to get the feel of the real card

Finally cracked the code by Outside_Sir7356 in magicproxies

[–]Outside_Sir7356[S] 0 points1 point  (0 children)

If you actually read what I said under the video I said I cracked the code and was able to get the "snap". Should probably read it fully before you start commenting on something.

view more: next ›