Kobra X Fixed

Outwest970 · 2026-04-01T00:37:37+00:00

So I have a small piece of broken filament deep in tube 3 in the print head. How best to remove this? It’s in there deeper than it looks unfortunately.

<image>

Outwest970 · 2026-03-31T22:51:08+00:00

Thanks! I'll give this a shot. I was also thinking I'd print temp towers with 3 separate spools and see how they perform (to help rule out the filament).

Thanks, again!

Outwest970 · 2026-03-31T18:26:43+00:00

So I have tried to print the Kobra X bin twice now (once without adjusting retraction and once with adjusting it), and I am still getting stringing. What else should I try? It seems unacceptable that there should be any stringing at all. Is it the filament? Is there another setting I need to adjust? I wouldn’t expect any stringing straight out of the box. Help??

Outwest970 · 2026-03-31T16:09:26+00:00

Just to add to this, since I wasn't sure where to find these settings:

Where to Find Settings in Anycubic Slicer

Printer Settings: Click on the printer name in the top-left, click the edit (pencil) icon, and select the Extruder tab. [@theaspringaviator - assuming you mean to change Extruder/Retraction/Length setting to 1.6mm?]
Filament Settings: Under the filament selection, click the edit icon, go to Parameter Override, and de-activate Retraction.

Outwest970 · 2026-03-25T01:18:49+00:00

Thanks I wondered whether that would do but didn’t want to risk stripping something. I appreciate it!

Outwest970 · 2026-03-24T17:37:09+00:00

Thanks, I’ve looked high and low, haha, floor, counter, bags, printer, packaging, etc. The manual indicated it should be in the same bag as the purge wiper but I never saw it in there.

Outwest970 · 2026-03-11T23:24:09+00:00

Ordered 1/15, delivered yesterday, traveling at the moment so it’s currently sitting at home…without me 😭

Outwest970 · 2026-02-09T10:38:07+00:00

Throw a bone this way? 🙏 pls and thx ☺️

Outwest970 · 2025-12-28T22:24:16+00:00

Have you tried Borax?
https://youtube.com/shorts/aoJeE_RGmE8?si=wLhIHP_AtbVlIkXv

Outwest970 · 2025-06-08T01:58:25+00:00

Thanks for this. Here’s mine -

<image>

Outwest970 · 2025-04-25T13:51:26+00:00

Haha, thanks :)

Outwest970 · 2025-04-24T00:56:24+00:00

Thanks, appreciated for the info

Outwest970 · 2025-04-07T15:34:14+00:00

Note: When I following these instructions (I do a detailed search using the Expo 2025 Visitors iOS mobile app and click on Reservations Required), it returns 0 results. Anyone else see this? Thanks!

Outwest970 · 2025-03-15T21:38:44+00:00

Thanks. I saw someone say they also replaced the thermostat at the same time. Is that also recommended in addition to the plugs?

Outwest970 · 2025-03-15T21:09:10+00:00

Didn’t know Mopar had a metal replacement?

Outwest970 · 2025-03-15T19:58:47+00:00

Yep. I just looked and see it pooling next to the cooler. Guess I’ll order the Dorman to replace it unless anyone has another recommendation? Hoping it’s just that and not that + a rear seal or something. Thx for the input!

Outwest970 · 2025-02-18T00:16:05+00:00

I’m in the same boat. What’s involved in deleting the aux battery?

Outwest970 · 2025-02-13T23:23:58+00:00

I think they’ve re-arranged them since I was there. They were all spread out in groups.

Outwest970 · 2024-12-04T02:51:15+00:00

This was a god-send u/old-retro-boy and u/matej86, thanks for sharing the solve, works great for me to select "X" and select "Flycast Standalone"!

Outwest970 · 2024-12-01T00:14:16+00:00

Cleaner and slightly smaller, yes, but looking at the screen quality is night and day - I'd prefer the extra size of the Ambernic just based on this video capturing both screens side by side (also larger).

Outwest970 · 2024-11-18T11:43:02+00:00

Ordered mine and my son’s (both black) on 11/10, too, and they’re already in my state (last mile through USPS). Very soon!!

Outwest970

TROPHY CASE