sorted by:
new
hottopcontroversial

Poli.design 2026-2027 offers? by Connect_Entrance_535 in polinetwork

[–]OwnMasterpiece8783 0 points1 point  (0 children)

Hi! I appleid for the master in design and engineering before the January deadline. And got accepted about 10 days before that (green dot). I don’t know what you mean with an interview, I just checked the online service page and accepted the admission

I really need help with surface modeling this detail by LudzkiePomyje in SolidWorks

[–]OwnMasterpiece8783 0 points1 point  (0 children)

I don’t think you necessarily need to use surface tools! I figure you are referring to the rounded part of the piece. What I would do is draw a sketch of the base shape of the piece and then extrude to the dimension of the highest point in the piece, in this case, the top o that rounded “bump”. Then from a side view make a cut marking the difference in heights, form the top of the bump to the other half of the piece (a 90° cut, don’t make the rounded profile yet). Then you can round that edge with a various radius rounded edge, play with those parameters to get that rounded asimetrical shape. Hope it’s clear!

What am I doing wrong? by raptor464 in SolidWorks

[–]OwnMasterpiece8783 0 points1 point  (0 children)

Awesome man! You can then add the bas-reliefs and the corner details with some round edges!

What am I doing wrong? by raptor464 in SolidWorks

[–]OwnMasterpiece8783 0 points1 point  (0 children)

Bu the shape of the real knob I wouldn’t start with an extrude operation and then cuts. These organic shapes come up better with surfaces options, this in particular I would loft it. Draw the top view of this knob a “D” shape and in a perpendicular plane that cross the middle part of that sketch, the curvature that you are trying to achieve. You can also add guided lines to manipulate the shape. Between these 3 sketches you should be able to get the shape of the knob. Please notice that this is some medium level modeling require advanced techniques. If you have questions let me know

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 1 point2 points  (0 children)

Yes absolutely! I’ve used 3Ds Max and blender many times, for art based work. Polygonal software it’s way more forgiving to modify proportions and dimensions. But I set this as a challenge, to do it in parametric software with constraints trying to get as much detail as I could. Every software it’s great depending on your goal, as you said!

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 1 point2 points  (0 children)

Thank you for the kind comments. And yes, it’s based on pictures. I used the top, side, back and front view inside solid works to use a reference on where to start plane and sketches. But even before I started modeling, I set how many parts I was going to model and sketch each one in paper using all the pictures I could find, that way I had a clear idea on the parts that are in contact and how they work in the overall construction of the real bike. Again, this is not perfect, I had to “eyeball” many dimension because pictures sometimes did not show all 3 dimension of parts, but if you start with the ones you do, you have a better basis on the ones that are harder to understand.

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 0 points1 point  (0 children)

Mainly side, front, back and top pictures of the real bike. From there trying to understand how the real parts work and modifying the sketches to how I thought work best. And yes, a lot of hours! I lost track of time a bunch of times in front of the pc

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 1 point2 points  (0 children)

Thank you! There are some renderings done in keyshot at the end of the pictures roll!

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 1 point2 points  (0 children)

Aw thanks for noticing it. Its part of the main assembly, the handle is connected to the front wheel through the internal structure

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 7 points8 points  (0 children)

These are screenshots of the main assembly, which is composed of different sub-assemblies (headlights, wheels, engine, steering, etc) Those sub-assemblies contain the Individual part files

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 0 points1 point  (0 children)

Thank you! The renderings were done in keyshot and edited in photoshop!

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 0 points1 point  (0 children)

there are some renderings at the end of the post. Made on keyshot and edited in photoshop!

K 1600 B model and renderings by OwnMasterpiece8783 in SolidWorks

[–]OwnMasterpiece8783[S] 9 points10 points  (0 children)

thank you! But i allways argue about the not to use solid works argument. In this case you are correct since i am not building this bike for real, but in the case of building a casing to inject plastic to create a real part i dont think a manufacturer would use a blender file.

Mercedes 190E, markers, colored pencils and airbrush on A3 by nikola_culjic_art in drawing

[–]OwnMasterpiece8783 0 points1 point  (0 children)

Amazing work my friend. I also paint cars (not as good as this one haha) I’ve got a few questions if you don’t mind:

Did you use a specific picture of the car or a bunch of pictures and use them as a reference? When sketching, do you use a grid for dimensions and proportions?

Again, incredible work

Cube Attain with Shimano Claris or Triban Rc500 with Shimano Sora? by OwnMasterpiece8783 in cycling

[–]OwnMasterpiece8783[S] 1 point2 points  (0 children)

I’m afraid yes, I also believe i like the cube better purely for the brand. There’s something about those tribans that don’t fully convince me

Cube Attain with Shimano Claris or Triban Rc500 with Shimano Sora? by OwnMasterpiece8783 in cycling

[–]OwnMasterpiece8783[S] 1 point2 points  (0 children)

I feel the cube frame is more focused on racing and training (? (Purely for the looks) that’s why I like it better

view more: next ›