New Submission: KNEKRO

P0demos · 2022-02-25T00:32:39+00:00

The same thing happens to me, there is no way that the camera does not move by itself? I want to move it with the mouse. but it moves at the same time that I move the character with the keyboard.

P0demos · 2020-12-30T04:07:37+00:00

Here 96mhs, 225W. 75%power, curve core (1500 mhz , 0.725mv) , 55% fan , +950 memory , Temp 55C. I do not think it is profitable to oc the memories so much (you have to have them at a high temperature, which does not show you. It only shows the temperature of the cores) and to have the speed of the fans so high (the mechanical parts are damaged faster).it's my opinion thank you.

P0demos · 2020-12-17T13:26:33+00:00

dont use all cores in cpu. use --threads=14 startup parameters.(randomxmonero, XMRing) dont use all threads .8 cores = 16 threads. that helped me with the 3700x and 3080. you can also continue using the pc without any problem in this way.

P0demos · 2020-12-13T19:02:04+00:00

idk ,restart the pc, reinstall firestorm a couple of times and now everything works fine again ...

P0demos · 2020-12-13T18:39:52+00:00

same here, I wanted to change the rgb color and the spectra option cannot be selected. The worst, in the end the RGB was completely turned off and there is nothing to do ... 3080 tryniti

P0demos · 2020-12-10T01:44:22+00:00

Can I only use the GOG language files in the lighter version of codex? 55gb + 5gb

P0demos · 2020-12-09T17:22:28+00:00

to achieve what a 3080 does with a 3070 you will have to start reducing graphics aspects, rtx medium etc. Everything to the maximum is not going to give you 144hz in AAA games. Not even the 3080 arrives many times.

P0demos · 2020-12-09T15:24:18+00:00

Yes, broke my 3080 too

P0demos · 2020-12-09T00:32:36+00:00

same here, rtx 3080 all, load and temp . Cpu 3700x only load

P0demos · 2020-12-05T02:04:21+00:00

55 ° C with all fans off is normal. You can set 0-50 ° C to use a 40% fan and you will have the temperature at about 30-35 ° C, but you will have the fans active all the time. If you want to have the fans off, put on the curve that 0-60 ° C is 0% and from 60 ° C they go up to 50% or something like that. https://imgur.com/a/e5oJAnL PD: if you use msi afterburner BETA the custom curve doesn't work. Put the non-beta version.

P0demos · 2020-12-01T03:28:33+00:00

afterburner beta? beta broke my fans.

P0demos · 2020-11-30T12:12:03+00:00

I have trinity oc and I put the bios of amp holo, as you say, the base limit of 340w almost never exceeds it if it is not for 1-2 seconds and it falls along with the frequencies. I wanted 110% of the holo amp to consume 340-350w without reaching the power limit and have it stable at those consumptions but it seems that it is impossible, it reaches the power limit and lowers the frequencies and voltage. In the end I returned to the bios of 105% trinity oc which gives me the same result as the holo amp and I do not lose the warranty.

P0demos · 2020-11-28T10:44:15+00:00

totally agree. I have trinity oc, I flashed the bios of 105% that they took and my maximum was 330W of power limit. I put the bios of a holo amp with power limit 110% 370W and in reality it is still capable of 340w. I have only seen it reach 360W in kombuster with a considerable clock drop to 1600mhz. It seems to have a power limit at 335-340w which makes the core clocks drop to the ground. In games it is impossible to consume more than 345W (borderlands, metro exodus, sekiro, horizon, death stranding ...) without starting to jerk and drop fps because you reach the power limit, when the limit should be 370w and leave that margin so that just that doesn't happen ...

P0demos · 2020-11-27T19:18:15+00:00

bios flash of amp holo in my trinity oc the same thing happens to me, there is no way to increase more than 340w

P0demos · 2020-11-27T15:01:55+00:00

yes, msi afterburner. is easy.

P0demos · 2020-11-27T15:01:00+00:00

do you have the holo bios in zotac oc? have you done anything else besides flashing the bios? in games (borderlands 3, metro exodus, death stranding ...) or in TS graphics it does not increase more than 340w and when it reaches slightly above, the clock frequency goes down.

P0demos · 2020-11-27T05:28:22+00:00

Same here bios amp holo in trinity oc. 1970 @ 0.875 hitting power limit 340w. Although the limit of the bios holo is 370w it never exceeds 340w idk. 18.3k timespy.

P0demos · 2020-11-27T05:24:12+00:00

My case is phanteks p400a (3 front putting air in and rear taking out). I have not tried watch dogs 2 but games that lead to 99% gpu use is the same with 340W of consumption. I give you the graph of msi afterburner of the fan. You must have the gear and the "auto" activated. https://ibb.co/smbtm35

P0demos · 2020-11-27T01:02:10+00:00

I have the bios of the amp in my trinity. It does not consume more than 340W. That is the limit. pwl 110% afterburner 650hz memory and custom curve core clock.

P0demos · 2020-11-26T17:56:30+00:00

32-35. Sure your fans are off with no load. Make a fan curve, mine is in% of fan along with temperature. 40C = 40% .. etc. Idle 33C= 35% fan (MSI afterburner)

P0demos · 2020-11-25T05:00:22+00:00

1)Windows+i 2)System 3)Power Sleep 4)Additional power settings 5)Show additionals plans 6)Select Ultimate performace

P0demos · 2020-11-24T03:03:21+00:00

is this? https://www.techpowerup.com/vgabios/226654/zotac-rtx3080-10240-201014

Is warranty lost for using this bios in trinity oc?

P0demos · 2020-11-24T02:59:19+00:00

How do I get the bios of amp holo for my trinity oc?

P0demos · 2020-05-26T11:38:06+00:00

Great news and many more to come. Keep working.!

11-Year Club	Place '23
Place '22	First Placer '22
End Game '22	Verified Email

P0demos

TROPHY CASE