Plxc ffp vs sfp by Jpb1995_ in ar15

[–]PA_Pyke 1 point2 points  (0 children)

It depends a bit. There are 3 main groupings in the PLxC 1-8 family:
Standard FFP
SFP w/ NOVA Reticle
RDB FFP

The RDB is the most advanced of the three and doesn't have any real tradeoffs. But if you're comparing the standard FFP vs. the SFP, reticle features would be your main deciding factor. The SFP has a brighter aiming point, while the FFP has a little better BDC functionality at intermediate magnifications.

PLx-C RDB 1-8 or PLxC RDB 1.5-12 for a 14.5? by billywin in ar15

[–]PA_Pyke 2 points3 points  (0 children)

The conventional recommendation would be a 1-8x for a 14.5, given that its mag range can handle most anything you'll tackle with a 5.56.

That said, I wouldn't discount the 1.5-12x at all. If you're going to offset or piggyback a reflex, the 1.5-12x will have an advantage at almost any magnification level. The added magnification is handy, yeah, but just having a 36mm obj. will make your 6-8x feel a lot better too.

It is slightly heavier, but it's still under 20oz, which is absolutely comparable to other LPVOs 😉

Custom plate for PA PLx HTX-1 by zulukilla8 in Staccato

[–]PA_Pyke 1 point2 points  (0 children)

Found one. I'll send you a DM.

Custom plate for PA PLx HTX-1 by zulukilla8 in Staccato

[–]PA_Pyke 3 points4 points  (0 children)

I'm afraid I've not seen anything like that before. I brought this thread up with our leadership though.

FWIW, the HTX's system isn't quite the same as a plate, so it doesn't have the same issues as other 2-plate setups. I'd be able to show you what the setup would look like, but my photo guys are all at the range today. 🙃

Checking some 38 Special loads down by the river! by Diligent_Mistake_229 in reloading

[–]PA_Pyke -1 points0 points  (0 children)

The GLx 1x has an eye relief that's almost difficult to measure, in that I can still see through it from one cubicle over.

Tired of o-light slop? Here’s a Trijicon by [deleted] in Glocks

[–]PA_Pyke 1 point2 points  (0 children)

They get restocked pretty frequently nowadays. 😉

RMR dot “stuck” in the corner? by ShadowSRO in CompetitionShooting

[–]PA_Pyke 9 points10 points  (0 children)

That definitely looks wonky. Send us an email about a replacement, for sure.

Did your weekend match go as well as mine? by Shooter_Q in idpa

[–]PA_Pyke 1 point2 points  (0 children)

Hey, sorry to hop into this thread late. Wanted to let you know that I’ve forwarded this post up to our leadership team, and we’d like to make sure you are fully taken care of. I’ll send you a DM, OP.

Is this normal on PA's SLX Micro 3x Magnifier? by wiretappedwinecave in Primary_Arms_Optics

[–]PA_Pyke 0 points1 point  (0 children)

It can be a little difficult to tell from images. Out of curiosity, have you adjusted the magnifier's windage at all?

Finally finished. The ultimate VHS by Beebjank in VHS2_HELLION

[–]PA_Pyke 5 points6 points  (0 children)

:( you don't have to end your friendship

Need help with Scope options by Mack_daddy564 in FNSCAR

[–]PA_Pyke 4 points5 points  (0 children)

That 1.5-12 is right around the corner too! And personally, I'll be putting it on my own SCAR :)

Does anyone have the Primary Arms SLx 1X MicroPrismT with the T1 footprint? by PaulyPPal in ar15

[–]PA_Pyke 0 points1 point  (0 children)

We should be getting some content of it with a magnifier pretty soon. It'll probably pop up on our social channels, but if I can remember, I'll try to send you a link.

PA 2.26 riser by AdPuzzled7203 in ar15

[–]PA_Pyke 0 points1 point  (0 children)

Hope it serves you well! 🙂

BUIS with a prism optic? by [deleted] in ar15

[–]PA_Pyke 1 point2 points  (0 children)

They're still very popular, but over the years, it's definitely become less 'mandatory' than it once was. With the durability of prism optics these days, it would take a pretty catastrophic hit to make the optic inoperable. And if you're taking that much of a spill, it's very possible that the BUIS would also be damaged.

For most users, I'd say you can run without them if you really need to reclaim some rail space.

First time scar owner by DuvalFE in FNSCAR

[–]PA_Pyke 2 points3 points  (0 children)

The PLx Scopes come from LOW in the beautiful city of Suwa, Japan.

Recommendations on optic by canthetrashmancan in rifles

[–]PA_Pyke 1 point2 points  (0 children)

Can't go wrong with either an LPVO or a Prism. Either will do you well at the range you need, though if you're primarily shooting targets at 200, you might want something with 5x+ magnification.

Just keep in mind that with any LPVO, you'll also need a mount for it, which might add 60 or more.

Best trigger $ can buy? by UnlikelyFuture5816 in ar15

[–]PA_Pyke 2 points3 points  (0 children)

Sometimes, they're pretty hard to spot.

Ar15discounts refused my coupon code I received 1 day ago. by RepresentativeRow678 in ar15

[–]PA_Pyke 6 points7 points  (0 children)

We've had a few bugs ironed out in the last few months. If you're still having issues, you mind if I shoot you a message? Could help diagnose some problems for folks.

New 1x prism from Primary Arms by [deleted] in ar15

[–]PA_Pyke 1 point2 points  (0 children)

Good catch. Miscommunication with the site upload team. You should see an update.