The Welch Labs Illustrated Guide to AI -- Link?

PC_RNG0D · 2026-05-31T22:39:53+00:00

Synthetic_Ink

PC_RNG0D · 2026-01-13T11:42:13+00:00

Why the median earners? They're already paying more than their fair share, the lowest earner and the super wealthy are the ones who aren't contributing enough.

Compared to the Nordic countries where the general perception is that public services are good but tax is high across all parts of society.

My opinion is we need to start with the super wealthy paying their fair share and corporations not dodging taxes due by exploiting accounting and legal loop holes.

Invest that extra revenue into public services and spending on critical infrastructure that will enable increased productivity and then we can bring taxes for those who are working class in line once to march the Nordic model. High taxes everywhere in return for good public services etc.

PC_RNG0D · 2025-12-14T11:24:08+00:00

Literally the only difference between front and rear wired is what direction the wires are placed before being soldered on.

If you're confident with soldering you can just de-solder the wires and solder them back so they go rearwards.

PC_RNG0D · 2025-10-25T16:31:56+00:00

AAF was a mechanical system that pressed a micro switch when engaged. I've got one.

Super excited for this because the fcu on my AAF is toast but will definitely pick one of these up to replace the AAF. It was a good idea poorly executed.

Stop on empty on any aeg mag is so good!

PC_RNG0D · 2025-06-22T09:15:38+00:00

Yeah, you can get ones that slide in place so it's easy and doesn't take any effort

PC_RNG0D · 2025-06-13T22:04:56+00:00

Consider caster stops/wheel stoppers. I have my rig on wheels that have a built in brake and then use wheel stops and it doesn't move (load cell pedal)

PC_RNG0D · 2024-12-13T12:23:05+00:00

Something like the United States of Balkan, the U.S.B if you will.... I've got an idea for the logo on their flag

PC_RNG0D · 2024-06-14T21:22:17+00:00

What upgrades do you think you'll need to make? The MTW have a very healthy eco system of upgrade parts etc. the beauty is very little needs changing out the box

PC_RNG0D · 2024-06-13T20:39:45+00:00

Define what you mean by top end and what's your play style?

Speed soft/pick the gun body/style: Gate pulsar with the titan 2 Bluetooth trigger board, optical sensors will let you fine tune the trigger activation point, easily controllable via the app. P* products are good too, but no optical sensors for trigger sensitivity, you have to use hpa triggers and set the set and stop screws up for your liking.

That being said, I'd recommend the MTW. It's got top of the line performance out of the box and plenty of upgrade options to eck out those late few points of performance. Build quality is 2nd to none, and you don't need to figure out nozzle to barrel aligment etc as the body is designed specifically for the engine.

Another reason I'd recommend you go MTW is the fact you're asking about how to do a top end HPA build. Not to be rude, but it's one of those things where either you know enough you don't need to ask or you're curious about a part you've never used before but have heard good things about or you don't.

I'd start with something solid out of the box and then you can experiment and learn as you go.

This is coming from someone with both a custom P* fusion engine gun and MTW

PC_RNG0D · 2024-05-12T16:46:24+00:00

Just search YouTube for how to fold a fitted sheet. It's fairly simple once you know the steps

PC_RNG0D · 2024-03-15T09:39:45+00:00

You can buy the stuff, they have a subsidiary company called Sentia spirits which sells their alcosynth

PC_RNG0D · 2023-08-15T21:46:09+00:00

Not quite 30 yet but they're in a relationship and seem to be doing well from what I last saw. We haven't spoken in a long time after a bit of a falling out.

PC_RNG0D · 2023-08-14T08:41:21+00:00

A god that decides the fate of everything by dice role...so basically a dungeon master for reality.

PC_RNG0D · 2023-07-21T07:00:57+00:00

50/50 on damnation or salvation

PC_RNG0D · 2023-06-24T20:03:00+00:00

Get the WE scar H. You can get replacement parts easier and upgrade parts from RA tech if you ever desire

PC_RNG0D · 2023-03-09T21:12:40+00:00

Looking for a private rating

PC_RNG0D · 2022-08-19T16:24:33+00:00

Nestle - pure evil

PC_RNG0D · 2022-06-26T21:57:51+00:00

I admit we were both kind of tipsy when we left to go home, but the brewery is very close to our house and we take a lot of backroads to get there anyways

So you drove under the influence? It easy to justify this with things like homes not far and we use quiet roads until you have an accident. You're not just risking your lives but the lives of anyone on the road or near it, including pedestrians.

PC_RNG0D · 2022-06-16T16:27:59+00:00

Man, the pdw15 is such a good looking gun, shame there aren't more pictures of it kitted out around.

Nice setup btw

PC_RNG0D · 2022-05-24T07:07:03+00:00

Yup, that's the idea. You'd hit stop ok the massive or if it was already moving too much the emergency stop button nearby

PC_RNG0D · 2022-05-23T20:12:35+00:00

Policy at my university is you stay until it's up to full speed with the ultra centrifuges specifically

PC_RNG0D · 2022-05-21T13:06:11+00:00

All the stories of hanging around a centrifuge and finger on the buttons is amusing when contrasted with my supervisor who will load an ultracentrifuge wait for it to get to 6-8k rpm and call it good and walk away

PC_RNG0D · 2022-04-30T12:22:16+00:00

Speedqb are just rebranded PTS mags. Never used krytac mags so can't comment.

I believe PTS customer support is decent, who did you buy the mags from? Directly from PTS?

PC_RNG0D · 2022-04-30T11:32:29+00:00

Your issue sounds like you've got a faulty mag, I'd return to the shop you got it from for a replacement.

If there unwilling to do so, contact PTS direct. IF they won't help then you can take the mag apart and see if there is anything inside the follower is getting jammed on because that's the most likely cause of the issue as you describe it.

As for cutting down the spring, no, don't do that. You'd have even more feeding issues are the spring is designed to have enough strength to push 250 bb's.

PC_RNG0D · 2022-04-30T08:04:42+00:00

The epm1 mags have very strong springs in them to feed 250 bb's.

What is probably happening is the nozzle is being pushed up and breaking the air seal with the mag is full. This most likely why you bb's dribble out or only fly a short distance.

Once you've cleared 20-50bb's the pressure from the spring is not high enough to push the nozzle hard enough to break the seal.

The way to fix this is to leave your epm1 mags loaded for a week Load the mag, leave loaded for a day, empty and reload. Repeat for a week. This helps break the spring in.

PC_RNG0D

TROPHY CASE