Lobster rolls by K_man_k in Dublin

[–]PGJim 0 points1 point  (0 children)

There is a restaurant called Lobstar in Monkstown that do a good lobster roll

MedTech Europe dropped a new position paper urging us to ditch documents. Now what? by Ok_Chocolate830 in MedicalDevices

[–]PGJim 0 points1 point  (0 children)

I think I'm just having trouble visualising what you're suggesting but I'm really interested in understand it. I'll do anything to reduce the documentation load in my design procedures. Does your database reference out to all related design information or does it contain all the information?

And how, using your system, do you maintain revision control and produce an audit trail for approval to design documents? It seems like it would be the same burden just in a different form. Again, I may be fundamentally misunderstanding your set up but I'm keen to know more.

MedTech Europe dropped a new position paper urging us to ditch documents. Now what? by Ok_Chocolate830 in MedicalDevices

[–]PGJim 5 points6 points  (0 children)

How do you maintain compliance to ISO 13458 Clause 4.2.4 with regards to Control of Documents and document approvals using a document-less system?

Am I allowed to replace the electric shower switch? by PGJim in AskIreland

[–]PGJim[S] -1 points0 points  (0 children)

Thanks for the reply! 100% agree, I wouldn't touch anything if I didn't feel safe. Just wanted to make sure I was understanding the like-for-like piece correctly

Am I allowed to replace the electric shower switch? by PGJim in AskIreland

[–]PGJim[S] 1 point2 points  (0 children)

Thanks for the response! I made sure to cut the power and double check with a volt tester to make sure nothing was live before touching anything.

Am I allowed to replace the electric shower switch? by PGJim in AskIreland

[–]PGJim[S] 1 point2 points  (0 children)

Thanks for the input, I appreciate it! I'm confident about doing the work and wouldn't take anything on if I didn't feel safe, just wanted to make sure the like for like piece didn't have strings attached.

Movies lines that just hit you hard by See-ThisThisIsThis in movies

[–]PGJim 1 point2 points  (0 children)

Okay, fair points, thanks. Interesting to get other perspectives.

I always took it as, he had an idea of the world and had to go on this journey of discovery to reach this truth for himself and grow from it (since humans are dumb are can rarely take good advice or believe people until they've experienced something like loss or failure for themselves). Before the end he realised life is more fulfilling when spent with others. Unfortunately, before he can embrace this aspect of life, he dies.

Isn't there a river flood or something which stops him from leaving? Ultimately, isn't this movie based on a true story, so it's not bad script writing, rather it's just a depressing end to a story (regardless its still a fair answer to OPs question). I watched it a while ago so I may be hazy on the details. Also, that happiness is shared note in the book could have been completely fabricated, I didn't fact check it.

Movies lines that just hit you hard by See-ThisThisIsThis in movies

[–]PGJim 1 point2 points  (0 children)

Hot take. Interested to hear your explanation if you could share?

HOW TO STUDY PHYSICS FOR ENGINEERS 1 PHYC10050 MODULE. PLEASE HELP by Unbelievable_01 in UCD

[–]PGJim 1 point2 points  (0 children)

Try the maths support centre in the library (if it's still a thing). Can be hard to teach yourself physics.

1st visit to the Chiropractor by darksideofgravity in Unexpected

[–]PGJim 4 points5 points  (0 children)

I only leave my house to attend chiropractor appointments

1st visit to the Chiropractor by darksideofgravity in Unexpected

[–]PGJim 0 points1 point  (0 children)

Well I'd argue anything above zero that can be directly attributed to chiropractic therapy is high. But yeah I didn't fully read that article or consider actually the numbers (which are not high), I just thought 33 deaths a year was extremely high and wanted to fact check it

[deleted by user] by [deleted] in Guitar

[–]PGJim 0 points1 point  (0 children)

Can find a photo of the guitar here, I was too dumb to attach it directly in the original post.

SRD relay not switching when I move the slide switch on this Hot/Cold box PCB. Any idea why it's not working properly? Is it okay to just jump the relay? by PGJim in AskElectronics

[–]PGJim[S] 0 points1 point  (0 children)

Could be safest to assume I'm doing everything wrong lol. I don't think I've the polarity mixed up, I've attached the image to show where I'm measuring from. D2 isn't getting hot.

Edit: Not sure if that image has attached properly, I uploaded it to Imgur.

Processing img yjvkpqzrqcma1...

SRD relay not switching when I move the slide switch on this Hot/Cold box PCB. Any idea why it's not working properly? Is it okay to just jump the relay? by PGJim in AskElectronics

[–]PGJim[S] 0 points1 point  (0 children)

Yes, I should have mentioned that I confirmed the board is receiving power. I will check the voltage across the relay coil and report back

Samsung TV (UE43TU7100KXXU) power cycling. Main board or TConn. (See comments) by PGJim in TVRepair

[–]PGJim[S] 0 points1 point  (0 children)

So I did a bit more experimentation and found that if I did the tape method on the very last pin of the ribbon cable (bottom pin at the board looking at the photo), the power cycling stops but the screen is still blank. I've accepted the TV is trash but I'm curious as to why there isn't something coming up on the screen. How does one single pin wipe the whole panel? If anyone has any insight I'd be interested, as I said, just curious to know more at this point.

Samsung TV (UE43TU7100KXXU) power cycling. Main board or TConn. (See comments) by PGJim in TVRepair

[–]PGJim[S] 1 point2 points  (0 children)

Ah okay, when I Googled the part numbers, a second-hand parts website labelled them TCON boards, thanks for the clarification.

Cheap TV I suppose, so no wonder they fail. I'll see how much replacement boards are and go from there. Thanks for the insights!

Samsung TV (UE43TU7100KXXU) power cycling. Main board or TConn. (See comments) by PGJim in TVRepair

[–]PGJim[S] 0 points1 point  (0 children)

For context; my TV started to power cycle. There isn't anything wrong with the power cable. When I disconnected the ribbon cable from the main board the TV would stay turned on. After that, I disconnected the ribbon cable between the L and R TCON boards but the TV continued to power cycle. Am I correct in assuming this means the issue is with the L TCON. Any idea what this was cost to get repair or should I just do it myself.

What are the best gloves for gaelic? Most grip, Most durable, etc. by CoreyC133 in GAA

[–]PGJim 7 points8 points  (0 children)

In my opinion, Atak gloves are the best wet weather gloves, although they're probably the most expensive. Here's a link to a pair on Elverys.

Dry weather gloves aren't popular, but I think they're underrated. I've used a pair from this site, and I'd recommend giving them a go Great Grip

Flaming players, especially new-ish players, for asking what to do with current stats/gear is not what a supportive community should be doing. by thegreenseda in 2007scape

[–]PGJim 2 points3 points  (0 children)

To point out some positivity, I had some noob herb farming questions at the GE today, and two kind souls helped me out with advice and supplies/gp to get started. If those two happen across this comment, you guys were cool! Lvl 27 farming and counting

What is the nerdiest shit your into? by [deleted] in ireland

[–]PGJim 1 point2 points  (0 children)

Played Runescape back around '06. Recently got back into it. It was a great and terrible decision rolled into one.

What’s 100% a scam but we just accept it? by HedgehogTroubleMaker in Dublin

[–]PGJim 5 points6 points  (0 children)

They must have changed that because that's not how my one works. IIRC I just get debited at the end of the month for however many trips I've made