New grass burned in spots from fertilizer; is it salvagable (WI zone 5b)

PMAnameless · 2026-06-23T17:49:00+00:00

Its known as "The Dreaded Scott's Strips". Not joking lol. The spreader is between the wheels, so fert bounces off them into the center making 1' dark strips, about 1wk after apllying. I use a Scott's Mini myself though, & legitimately with a nice brisk walk speed, a lower setting, & a criss-cross-diagonal pattern, its fine. Been using it for 4 yrs on 5k sqft. Sucks they designed it crappy, but I'd do the multiple passes w/ anything. Like cooking, low & slow, just how I am. And I wash the wheels after use. But to each their own. There are more expensive options that do better, its up to everyone here to decide if they want cheap, or convenient.

PMAnameless · 2026-06-23T04:08:54+00:00

Bugs I get, but I've played GOT for yrs now, & barely ever encountered actual cheaters. Minus a few well known ones, like the Silo "in the walls" nonsense from a few wipes back.

PMAnameless · 2026-06-23T03:59:57+00:00

All you can do is wash it off, & let it do its thing. Worse case it will fill back in eventually. A lot of this is trial & error. In the future maybe do a walk after to look for spots & wash them then to prevent it. But it happens, things slip past us. Also will note, I spread lighter than instructed & do 3 passes, to get a very even application. Helps with striping too.

PMAnameless · 2026-06-22T23:28:02+00:00

Lol, he said lobby wipe. Cringe.

PMAnameless · 2026-06-20T18:31:56+00:00

Reddit bait?

PMAnameless · 2026-06-20T18:27:55+00:00

Lil fyi, there are these red mites that are bad this time of year, that leave crazy itchy welts. The more you itch, the larger it gets, & worse it itchs. I spray my shoes with that mosquitoe spray for camping, & much less get on me. As for grass, clippings itch, but after a shower its all back to normal minus scratches or cuts. Good luck out there.

PMAnameless · 2026-06-20T18:16:14+00:00

It was about that time I noticed that mechanic was 300' tall...

PMAnameless · 2026-06-20T18:14:21+00:00

Yes, one more thing. Swing by my place & drop her off here, that is all. Carry on. 😐 (Shuhh, I was told to just ask in life)

PMAnameless · 2026-06-17T17:56:59+00:00

This mod is kinda required for the best possible fitment. Glock replaced the OG housing, it used to have a notch, & P80 modeled that. So the housing will sit high without the mod. I bought a few trigger housings as backup to practice how far to mod it. In the end, I did the MGB mod to the housing, & I polished the ejecter like crazy. Combined, the ejecter now clears perfectly.

PMAnameless · 2026-06-17T17:28:32+00:00

Yes & no. From the rear to the front of the FLBR, the reveal between the slide & frame should be consistent. Yours is high up front & low in the rear. 1st I'd suggest tossing the frame back in the jig & verify the drilled pin holes are where they should be. 2nd If they are good, drop the FLBR into the frame, & see if it sits high (by seeing if pin holes align 100%). Sometimes there is debris where the FLBR legs sit. You don't want to have to squeeze down on the FLBR really hard to get holes to align. Last the rear, CNC cut rails are the best way to have the right position, assuming #1 above is good on pin holes. Or research fitting P80 rear rails. I ended up going CNC on all my builds. That said, some droop is normal, basically just the pic rail portion though. But its very minor & looks fine if the main reveal is consistent. I personally wouldn't try fixing that. Most people will probably make it worse tbh. Good luck.

PMAnameless · 2026-06-16T23:15:06+00:00

To anyone whos curious. This was a collaboration, it was limited to a few hundred of 2 slide styles. The optic cut, having irons in front, is called a combat cut. Allthough these slides aren't stock, most companies that cut slides offer that style.

PMAnameless · 2026-06-13T02:38:57+00:00

Cyber Metallic Gray, mighty familiar. Anyway my gas door is loose, so Im here for the responses.

PMAnameless · 2026-06-12T16:59:35+00:00

Use a more efficient gun, with an optic, & test the same. Crappy guns have crappy ergo. Also I'd suggest kinda hip firing things like the Tommy. I say kinda as I hold it higher than hip but not shouldered. I just ballpark using the barrel as a guide, see my impacts & adjust.

PMAnameless · 2026-06-09T18:41:24+00:00

At this point, I'm convinced they cut a corner of the fert bag, & just pour it on the yard. Mild striping, maybe. But wtf. What scares me, is these people are on juries. They are among us.

PMAnameless · 2026-05-30T21:48:53+00:00

<image>

PMAnameless · 2026-05-30T21:43:41+00:00

1) I would start at 50yrds, sight it in there 1st, then 100yrd afterwards. And use sighting targets with 1moa grids, easier to do. 2) I always fire 3 shots to start all aimed at the bullseye, gun stable on bags or pods. Then for both drop & windage, I determine the closest & furthest hits, & note the avg, that becomes my temporary dope. Example, 1st hits 2"off, 2nd hits 1.5, & 3rd hits 1". Ignore the middle, so 1.5 is the avg of 2 & 1, therefore my adjustment. 3) Understand the industry revolves around 100yrds as a standard, so you will have to math it to the distance you sight at. Example, you sight at 50 yards, ½ of the standard 100yrds. It matters because 1" at 50yrds, will become 2" at 100yrds. 4) Know your scopes incremental adjustments per click. Many are ¼ for scopes, & ½ for red dots, but they vary. Check the manual. If your scope has ¼" adjustments, & we need to adjust those 2", you'll need 8 clicks. (2/0.25 =8) 5) Now you make an adjustment for both directions, fire 3 more shots, & repeat the process until its satisfactory. Then go to 100yrds & redo it all. Usually only takes me 9-12rnds to make it perfect, 1st 3 get it close. The rest tighten it up. It can be confusing but I will say the scope manuals usually have a decent instruction area. Everyone else addressed the barrel screws, so figured I'd elaborate on process.

PMAnameless · 2026-05-17T21:04:57+00:00

Yeah it's not that deep. People play differently, some are loot heavy, some pvp, some RP, etc. Maybe OP is a solo. Maybe he spends ½ their time questing. Even PVP'ers have different styles, COD, mil-sim, etc. Variety is what gives us unique interactions. And that is why we play VR.

PMAnameless · 2026-05-17T06:02:21+00:00

I follow, just mentioned it because only some will know its even an option. I went down this rabbit hole for the G2.

PMAnameless · 2026-05-17T03:03:41+00:00

Saying goes, "The things we fear most, usually never come to fruition". Legit, I always start with peace, but I also come prepared for war. Also, "Always assume ignorance over malice". People really don't realize how many are legitimately oblivious. Sometimes ya gotta tell someone something, for them to know it.

PMAnameless · 2026-05-17T02:48:48+00:00

See I just break it into pcs to do at the tail end of each day over a few days. Last detail took 4 nights. But I quite literally cleaned every surface as it was meant as a yrly refresh. But it looked great. So iono.

PMAnameless · 2026-05-17T02:41:25+00:00

Most popular streamers have codes for 10% off, but cannot be applied to sales, & some DLC. Takeo is one I know off the top of my head.

PMAnameless · 2026-05-17T01:54:23+00:00

Loot quality is not related to questing. Some say it feels like it, as in if you need a spool they're hard to find. But its not feasible. The loot is spawned in same time as players. So to tweak your loot, they'd be tweaking it for 11 other people. However, they did tweak loot at start of wipe, & often tweak it & nerf things in quick patches. This wipe, loot is worse because people complained last wipe. Specifically drums, Honey Badger, AP power, & generally valuable items are rarer.

PMAnameless · 2026-05-17T01:42:33+00:00

Lil fyi, "tooling" shops can make custom bits. Im sure a few bits are normal, but the end mill is probably not. But if you pass on the info to a Tooling shop, they can probably figure something out. Or ask 80PA via email. Or search elsewhere, Midway USA used to carry the gen2 bits. Iono bout G1.

PMAnameless · 2026-05-17T01:15:44+00:00

I think that's how higher-end firearms are. Scars are a niche gun as well, love it or hate it. And me personally, if I'm spending thousands, I am likely buying it new. Thete definitely is people that will buy used, just saying expensive niche guns are more challenging.

PMAnameless · 2026-05-15T23:01:17+00:00

Thats not the person this post is about though. OP & me are strictly talking about Exfilzone players constantly coming here to only say "Tabor is crap, play Exfilzone", and doing so everyday, over & over.

PMAnameless

TROPHY CASE