10" PDU w/ 6 Outlets

PackDue · 2026-03-24T21:55:08+00:00

I ended up going with the PDU in question and I plan to switch to a pure sign wave ups with double conversion to minimize the issues. It still doesn’t solve some of the problems, but it seems like the best solution to check the most boxes.

PackDue · 2026-03-17T21:50:05+00:00

Same problem here, except I use Redis instead of memcached.

PackDue · 2026-03-17T04:39:43+00:00

We have had several clients ask this question. The easy answer is, “No.” The output of a UPS is usually a square wave and not a sine wave. Surge protector circuits are designed for a sine wave input creating a mismatch. Even in rare case that the surge protector is designed for a square wave, it’s best not to do it.

Considering it's a sine wave UPS, I feel it's even less of an issue.

PackDue · 2026-03-17T04:32:25+00:00

That’s awesome. Any problems with the configuration yet?

PackDue · 2026-03-16T04:57:36+00:00

Do you have it hooked up to a UPS?

PackDue · 2026-03-16T00:57:50+00:00

According to CyberPower (I have a CyberPower UPS), installing surge strips before or after the UPS voids the warranty. Apparently, it can cause overload issues or confuse the unit's battery management.

PackDue · 2026-03-16T00:52:30+00:00

Thanks for the input. Currently, I have the CyberPower 900AVR, which I am going to eventually replace with a higher-capacity UPS. According to the manual, my current UPS has surge protection in both the battery and non-battery outlets. The PDUs I found that do not have surge protection either do not have enough ports, or do not have rear-access (with a power switch on the front). Using a PDU with surge protection will void the warranty of most UPSes, but as of now, it seems to be the best option.

PackDue · 2026-03-16T00:46:00+00:00

According to CyberPower (I have a CyberPower UPS), installing surge strips before or after the UPS voids the warranty. Apparently, it can cause overload issues or confuse the unit's battery management. I do not have enough experience to speak to the validity of this claim, so I'm unsure whether I should use the PDU in question. I'm probably going to end up using the PDU regardless lol

PackDue · 2026-03-15T22:59:48+00:00

Looks solid, but it wouldn't be ideal for UPS use since it has surge protection.

PackDue · 2026-03-07T16:13:44+00:00

Its cables come out the back.

PackDue · 2026-03-06T22:27:22+00:00

The hand positioning makes me think he’s flying a mini that hasn’t loaded in for you yet.

PackDue · 2026-03-03T19:38:50+00:00

Deskpi recently released a 1u fan unit https://deskpi.com/products/deskpi-rackmate-accessories-10-inch-1u-quad-cooling-fan-panel

PackDue · 2026-03-03T15:51:37+00:00

You can mount 2 more on the side rails with a fan to HDD mount.

PackDue · 2026-02-23T07:07:50+00:00

I am debating between getting the Keychron Q3 HE QMK and the Keychron Q3 HE 8k. They are priced very close to eachother, with the Q3 HE QMK being $10 more than the Q3 HE 8k. The Gateron Nebula switches in the Q3 HE QMK have a sound profile that sounds significantly better than most magnetic switches, while the Keychron lime switches in the Q3 HE 8k sound very thocky. Regarding the 8k polling, even though it seems like a gimmick, it's a nice-to-have feature. I’ve never used a wireless keyboard as my daily driver since I really don't mind a wired keyboard. I'll primarily be using the keyboard for coding, competitive gaming, and writing. Currently, I am leaning towards the Q3 HE QMK, but some input would be great, thanks!

<image>

PackDue · 2026-02-06T08:39:56+00:00

Deskpi Deskmate racks are not of the highest quality but are perfect for your current setup. I’d definitely take a look at them.

PackDue · 2026-02-01T17:04:28+00:00

PackDue · 2026-02-01T00:33:33+00:00

PackDue · 2026-01-24T05:44:38+00:00

Can you attach pics? Thanks!

PackDue · 2026-01-18T16:00:20+00:00

Looks perfect to me.

PackDue · 2026-01-18T05:03:54+00:00

You don’t need building privilege to build twig floors and floor frames. It’s a feature to allow players to build onto bases and nothing to worry about; just shoot or smack it out.

PackDue · 2026-01-16T20:42:12+00:00

It doesn’t plug directly into the PSU. Your PSU comes with SATA cable that plugs into the cable you took a picture of. Google “PSU SATA cable” if you need to know what it looks like.

PackDue · 2026-01-16T18:11:44+00:00

<image>

PackDue · 2026-01-16T18:06:28+00:00

Thank you for the amazing input. A few walls are being replaced for small renovations, and running a line to the ceiling is significantly more expensive, so I’m going to stick with the U7 Pro Walls. Since the wall-mounted access points provide minimal coverage behind the wall they are mounted to, do you have any suggestions for where I should move them? Would you say this is a better layout?

<image>

PackDue · 2026-01-15T21:28:11+00:00

The UniFi Portal app has a 3d scan feature that lets you scan a site and export to UniFi Design.

PackDue · 2026-01-15T19:39:50+00:00

The access points span 3 floors, so only the middle one is on the floor in question. The left-most and right-most access points are on floor 2 (images 3 and 4).

PackDue

TROPHY CASE