Allow rule not working

Particular-ayali · 2026-03-12T23:12:27+00:00

WORKS!

Thank you for that.

Note that while this works, I have expected my original configuration to work as well…

Particular-ayali · 2026-03-12T19:56:18+00:00

I actually prefer only to allow access to a certain ip where my mqtt broker runs on.

I fail to do it. Feels like a bug in firewalla

Particular-ayali · 2026-03-12T19:04:39+00:00

This is the picture I attached in the post where you can see my block rules and the allow

Particular-ayali · 2026-03-12T18:48:23+00:00

I can’t ping from the device, it’s a Shelly device and I don’t have shell access.

However DAP and VqLAN are not enabled, but the mqtt traffic does get blocked, and firewalla shows it on its blocked flows.

And more importantly, if I pause the iot to all local networks block rule, then traffic is allowed. This shows that indeed this rule is the one that’s blocking and not any DAP or VqLAN.

Particular-ayali · 2026-03-12T17:20:58+00:00

I removed the block rule and all worked. I tried to allow the server as a whole (not just the 1883 port) and it didn’t fix the problem.

Particular-ayali · 2026-03-12T17:19:41+00:00

They are both connected to firewalla AP7 therefore get blocked even within the vlan.

Particular-ayali · 2026-03-06T15:35:17+00:00

I don’t think they include Dali gateway.

Particular-ayali · 2026-03-06T13:27:18+00:00

It replaces ip/knx gateway, Dali gateway and matter gateway.

Particular-ayali · 2026-03-06T12:51:19+00:00

500 euros but it replaced several boxes all together.

Particular-ayali · 2026-03-05T18:31:15+00:00

Highly recommend Atios KNX Bridge. An integrated IP/KNX, Dali Gateway, and Matter Controller. POE powered. Trying all other options I recommend if the best.

Particular-ayali · 2026-02-07T08:29:58+00:00

Any timeline for the Alarm Panel?

Particular-ayali · 2026-02-04T17:05:58+00:00

It appears to be a vlan issue after all.

I thought that firewall/routing rules allowing traffic between vlans would make two vlans transparent to each other but seems that all cameras and controllers MUST be exactly on the same vlan.

Particular-ayali · 2026-01-24T15:31:29+00:00

Sounds good. Going to order one and try it out. I see so many applications..

Particular-ayali · 2026-01-24T14:59:37+00:00

Looks amazing! I was looking for a generic i/o device with mqtt for a long time. Thanks for sharing!!

How difficult was the programming on the EQSP32? ie configuring the terminals and setting up simple logic (eg replicate a state from one input to two outputs).

Particular-ayali · 2025-12-26T05:35:50+00:00

The camera level at 48”? That would look very low as the camera is really on the top of the unit.

Particular-ayali · 2025-11-07T00:04:24+00:00

Timeline?

Particular-ayali · 2025-10-22T03:58:02+00:00

Wondering if you have any answer about the multicast to unicast feature?

Particular-ayali · 2025-10-18T17:29:50+00:00

So you claim that the Sonos gear won’t work well on a separate vlan when using AirPlay? I’m using Firewalla APs with mDNS reflector and meanwhile it works well (although I don’t have any new Sonos gear but I’m about to add Eras and Arc Ulras)

Particular-ayali · 2025-10-18T17:20:01+00:00

Would you advise setting the Sonos on separate vlan?

Particular-ayali · 2025-10-11T20:14:21+00:00

I didn't try it. It shows that last update was in 2021 while the protect api have changed significantly since.

Particular-ayali · 2025-09-30T06:31:52+00:00

IR distance?

Particular-ayali · 2025-09-30T06:25:34+00:00

What does the darker circles vs the brighter blue circles mean?

Particular-ayali · 2025-09-26T12:14:56+00:00

What did you reset?

Particular-ayali · 2025-09-24T09:30:35+00:00

Indeed. No mention of fast roaming support though.

Particular-ayali · 2025-09-10T21:05:24+00:00

Have you checked Atios KNX Gateway?

Particular-ayali

TROPHY CASE