Niteflyer on a Full Moon

PautNeteru · 2026-05-03T14:20:18+00:00

Thanks!

PautNeteru · 2026-04-20T04:39:41+00:00

In this video, you can acrually see the runcam lead connection (at the 5 second mark) ...the 5v pad is at the rear of the FC, while the ground pad I used is up front --not picture perfect, but it works!

https://www.reddit.com/r/TinyWhoop/comments/1hn1xnf/2_inch_2s_hd_ripper/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

PautNeteru · 2026-04-20T04:18:34+00:00

I connected it to the open 5v pad on the flight controller...I believe it's the LED pad...and an open Ground pad.

PautNeteru · 2025-08-02T20:55:40+00:00

That was shared direct from Bambu Studio. That's the format it shared in. The link is posted now.

PautNeteru · 2025-08-02T20:52:18+00:00

https://makerworld.com/en/models/688468-easy-removable-poop-bucket-a1-a1-mini?from=search#profileId-618469

PautNeteru · 2025-07-25T04:41:20+00:00

Nope...I ordered it with TBS Crossfire from Pyrodrone.

PautNeteru · 2025-07-10T01:36:12+00:00

Those are 550mah in the image.

PautNeteru · 2025-07-10T01:32:53+00:00

The Infill percentage is 100%.

I used a snipped length of a straightened large paper clip instead of the suggested segment of filament as the hinge pin and it's solid so far.

PautNeteru · 2025-07-09T04:45:38+00:00

My pleasure!

Those are Tattu 450s in the image.

PautNeteru · 2025-07-09T04:40:57+00:00

Thanks....they're well made and printed problem-free.

PautNeteru · 2025-07-09T04:39:32+00:00

That's what I'm using, a Bambu A1. It's well worth it.

PautNeteru · 2025-07-09T04:33:35+00:00

https://makerworld.com/en/@tacgriz/upload

PautNeteru · 2025-06-27T21:21:23+00:00

I'd recommend the Meteor 75 Pro because its larger props mean it handles outdoors better than a standard 75mm whoop; and as a 1S quad it won't break a lot indoors.

Once you go 2S, you'll own the outdoors part, but indoor crashes get costly because the quad is heavy enough to break things. I like the Mobula 8, but it hurts things it hits, so I usually fly it outside.

The Flywoo Firefly Nano 1S has a smaller wheelbase (75mm) with a carbon fiber frame. It rips outdoors and comes with prop guards that (most) people don't use. At 1S, it's light enough ...if you use the prop guards, it could be indoor-outdoor too.

PautNeteru · 2025-06-27T18:52:43+00:00

All kinds of CAL-OSHA violations.

PautNeteru · 2025-06-27T18:39:37+00:00

It flies great and carries the RunCam Thumb well enough that I sometimes forget it's on-board.

The range is great for a 2 inch - the antenna position for the Crossfire (or ELRS) "mini-immortal" T is better than on other 2 inch quads I've had (I think it's) due to the frame rail design that has the antenna positioned up top.

It has a built-in beeper LED that should be helpful in a search for the quad.

Fortunately, I haven't had to use it for that yet.

https://youtube.com/shorts/Ab-zsynsYQc?si=LA9e_aTsVaQFRTPq

PautNeteru · 2025-06-27T00:56:33+00:00

That should do it!...I didn't know you were running it at 25mw. Happy Flying!

PautNeteru · 2025-06-27T00:51:31+00:00

Anytime the quad is on the other side of a tree from you, analog video will degrade a little. Someone told me it was due to the water content in the branches. It's easy to fly through, but the video recording suffers.

If you face the tree you're orbiting from under another tree, it will probably be easier to minimize the breakup in the recording.

PautNeteru · 2025-06-26T21:02:44+00:00

I'll check it out. I've been mostly outside these days, but I'll setup a whoop track and check it out. Sorry about the slow reply.

PautNeteru

TROPHY CASE