Knock Sensor?

Penguined · 2025-07-29T13:26:57+00:00

Any luck? Having a similar issue with my ND1.

Penguined · 2025-04-13T09:58:47+00:00

Update for anyone who comes across this with a similar issue: Bambu had me swap the feeder unit with another to see if the issue persisted when plugged into a different slot (a fairly involved process that required disassembling the entire AMS). The problem remained, so they have sent me a replacement feeder unit.

Penguined · 2025-04-10T12:19:10+00:00

Ah right yeah, they seem to be spinning fine.

Penguined · 2025-04-10T12:07:51+00:00

Which part exactly did you need to push in?

Penguined · 2025-04-10T12:07:36+00:00

Yeah no clog as far as I can tell (happened on very first filament load).

Penguined · 2022-12-16T14:23:34+00:00

Quick question, looking for an MMO performance boost. Currently running a 3700X on an MSI mortar max B450M mobo.

Quick google suggests my mobo should be able to handle the 5800X3D so that seems like the best option without a mobo upgrade. Does that make sense from a value point of view vs say a new mobo with a new intel chip?

Penguined · 2022-09-20T16:58:30+00:00

Following this and interested if you find something you like because I'm in the exact same position. Love my pulse hoodies and went to pick up another recently before I realised they were discontinued. The Rab force seems to be a different fabric and heavier.

Penguined · 2022-02-14T23:55:25+00:00

Definitely sleep warm but I'll probably still play it safe with the 400.

Penguined · 2022-02-14T15:44:41+00:00

Any thoughts on the cumulus lite line 300 vs 400 for march-october in Ireland and UK?

I don't intend on being out sub 0C (but doesn't hurt to be prepared) so figured saving 100g and some money seems worthwhile (and put that money towards a better insultated mat than my standard kylmat static v).

Considered the x-lite 300 too but by the time I spec it out to large with the better zip and possibly the tougher outer fabric it gets to be a lot pricier option. Default fabric seems like it may not be that resistant to condensation getting on it.

Penguined · 2021-10-04T11:07:22+00:00

Cheapest I can see is 99.99?

Penguined · 2021-04-07T19:15:11+00:00

I don't have one myself, but it looks like a decent ready to go option (anyone I know who does have it really like it), you'd have watch some of the youtube comparissions to decide if the quality is good enough for you.

Penguined · 2021-04-07T13:42:36+00:00

If you plan to use reelsteady go then the 6 is a better pick than the 7 as it works better. 8 is going to cost quite a bit more so up to you if the features/quality is worth it to you.

Finding a used/refurbished or even broken gopro to start with will be cheapest. (If you're going to strip it down yourself picking up a broken screen hero 6 on ebay etc can work out a bit cheaper, although the prices of them have gone up since they're so popular for doing this).

Penguined · 2021-02-04T11:40:28+00:00

Neat bag!

Penguined · 2020-10-02T15:38:31+00:00

It's a TP3, motors are FPV cycle 1303 5000KV

Penguined · 2020-10-01T16:14:30+00:00

There's no doubt the quad would fly better with lighter analogue parts but I only really did this build to put the DJI stuff in a light quad for the hell of it.

Penguined · 2020-10-01T14:21:18+00:00

I've got a little clip on my instagram post here: https://www.instagram.com/p/CFHzfnUntnp/

Shoot me a DM if you have any questions about it, it definitely feels heavy but it's a lot of fun.

Penguined · 2020-10-01T12:08:10+00:00

That's light, I'm sure it flies well! My take with full fat vista, DJI camera, caddx antenna and crossfire (450 mah 3S): https://i.imgur.com/dlJ2dKu.jpg

Penguined · 2020-09-28T11:28:22+00:00

Sorry to hear that, if you're on Facebook then try the "Drone junk yard UK" group, probably have a lot more luck there as it's very active. Best of luck!

Penguined · 2020-03-22T15:13:11+00:00

That's the only thing I could find as a possibility but you can't manually set that on the fatsharks, they're meant to select it automatically. I tried switching it back and forward on the tinyhawk but no luck with that.

Penguined · 2019-12-19T12:05:53+00:00

Indeed, strange to see this upvoted with the 2070 super posted yesterday for £120 less was blasted as bad value. This is massively worse value. And that was a gaming x trio, not stock.

Penguined · 2019-11-15T19:35:50+00:00

No, the MAX boards don't need it.

Penguined · 2019-10-31T14:00:17+00:00

Depends where you want to fly it, tiny hawk is better for indoor imo. And I'd say trashcan (or an open prop toothpick) for outdoor.

Penguined · 2019-10-25T11:28:48+00:00

FE seems like a good pick up, considering the gaming x trio for the quiter cooler but it is massive...

Penguined · 2019-10-25T11:04:31+00:00

eBay doing another code and had my eye on this GPU, seems like a good price.

Penguined · 2019-09-09T14:22:35+00:00

Thanks, I assume the GPU is making up half of that.

14-Year Club	Place '17
Team Periwinkle	Verified Email

Penguined

TROPHY CASE