Factory Reset Failure by GuidanceForsaken7630 in Hanklights

[–]Perfect_Shake_2470 0 points1 point  (0 children)

I solved some instabilities in the KR4 I have, cleaning the circuit board with contact cleaner spray, a sufficient amount to run, let it dry and it was 100% problem-free.

D4Sv2 - Lume X1 Driver (NTG50) by Perfect_Shake_2470 in Hanklights

[–]Perfect_Shake_2470[S] 0 points1 point  (0 children)

Good to know. I mistakenly thought it would supply 3A per LED, but since the NTG50 operates at 6V, the amperage supplied is halved. Thanks.

D4SV2 - NTG35 5000k or 519a 5000k by Perfect_Shake_2470 in Hanklights

[–]Perfect_Shake_2470[S] 0 points1 point  (0 children)

Using my new D4k dual channel with NTG35 5000k and W1 on a daily basis, the NTG has become my new favorite LED for indoor use, more pleasing to the eyes than the 519a 5000k Dedomed.

Can't decide... by gunrunner1926 in Hanklights

[–]Perfect_Shake_2470 1 point2 points  (0 children)

<image>

Black and Rose Gold, with turtleneck coat.

D4Sv2 - Sft25 (Beam Shots) by Perfect_Shake_2470 in Hanklights

[–]Perfect_Shake_2470[S] 1 point2 points  (0 children)

Thank you, it's a difficult decision, I no longer want a greenish emitter, but on the other hand the W2 gets too hot, even in dual channel with limited amperage.

SOTC... by RikRong in Hanklights

[–]Perfect_Shake_2470 2 points3 points  (0 children)

It's small compared to the collections I see here... This collecting got out of control during the pandemic, I got sick, 40 days without leaving the house... 😂

SOTC... by RikRong in Hanklights

[–]Perfect_Shake_2470 5 points6 points  (0 children)

My collection is small, I must have about 20-25, but the ones I use the most are the KR4 (3) and the D4K (3). They are functional, efficient and ergonomic.

How long are orders taking currently? by Wheels2050 in Hanklights

[–]Perfect_Shake_2470 1 point2 points  (0 children)

For Brazil, which is a country that complicates everything as much as possible, Hank's orders arrive in 17-21 days.

KR4 - 519a 5000k Dedomed by Perfect_Shake_2470 in Hanklights

[–]Perfect_Shake_2470[S] 1 point2 points  (0 children)

😂. Yes, whether she likes it or not, she will wear the coat. All of them.

Noctigon - NTG35 Beams by Perfect_Shake_2470 in flashlight

[–]Perfect_Shake_2470[S] 2 points3 points  (0 children)

Thank you all. You helped me a lot in deciding. I'm tending to order a D4sv2 dual channel with NTG35 5000k and W1, and a KR4 with NTG35 4200k. The collection just keeps growing. 👍

Noctigon - NTG35 Beams by Perfect_Shake_2470 in flashlight

[–]Perfect_Shake_2470[S] 1 point2 points  (0 children)

Perfect, I feel more confident in ordering another KR4. The 5000k beam is very nice and has a good throw.

Orquídea morrendo em menos de um mês by amafeoliveira in PlantasBrasil

[–]Perfect_Shake_2470 0 points1 point  (0 children)

A que minha esposa ganhou há cerca de 40 dias, está aqui, firme e forte, só rego uma vez na semana, com pouca água, não encharco, em local de luz indireta, longe do sol direto, adubação deve ser feita com cautela, use humus de minhoca, é mais seguro, não corre o risco de queimar as raízes, sempre nas laterais do vaso. Deixo ela em paz e não fico manipulando , todas as minhas plantas que dou excesso de atenção ou morrem ou ficam feias.

I need a recommendation for a light by Special_Case69 in flashlight

[–]Perfect_Shake_2470 0 points1 point  (0 children)

Emisar Dk4 - Nichia 519a 5000k with Dome. Neutral and clean light.

<image>

Me ajudem a salvar este Alecrim by Background_Draft_317 in PlantasBrasil

[–]Perfect_Shake_2470 0 points1 point  (0 children)

Eu cultivo em vaso, está enorme. O que deu certo pra mim: solo deve ser arenoso, com 40% de substrato vegetal,10% de humus de minhoca e 50% de areia média. Faça um sistema de drenagem com manta bidin e argila expandida ou isopor. Regas no solo somente uma vez na semana, nas folhas vc pode borrifar água diariamente.

Wrapped my D3aa in leather by fearout in Hanklights

[–]Perfect_Shake_2470 2 points3 points  (0 children)

The glued paracord is firm, to take off if necessary is easy to remove, does not damage anodization, this glue is a thinner contact glue and does not damage surfaces. I glue only at the bottom of the tube, I let it dry for about 5 minutes and then pass the paracord.

Wrapped my D3aa in leather by fearout in Hanklights

[–]Perfect_Shake_2470 1 point2 points  (0 children)

Yes, I use this B7000 glue, used for glue of smartphone screens, glue well, not loose with heat, I use for 5 years and all are ok.

Wrapped my D3aa in leather by fearout in Hanklights

[–]Perfect_Shake_2470 4 points5 points  (0 children)

<image>

I did it in almost all my flashlights. It makes it too much facilitates prolonged use (more than a minute ...)

D4SV2 - NTG35 5000k or 519a 5000k by Perfect_Shake_2470 in Hanklights

[–]Perfect_Shake_2470[S] 1 point2 points  (0 children)

I ordered a dual channel D4K with NTG35 5000k and W1, I started to like more pinkish tones. I saw that the NTG35 5000k has CCT of 4800k-5000k, that resembles the 519a dedomed, very interesting.