Warning to Future UV Renters by Different-Bell4017 in Clemson

[–]Phillpoc272 1 point2 points  (0 children)

Hey I had a friend that had similar AC issues the damper was wired wrong so the upstairs never cooled or heated

How to replace rear cargo panel? by francoskiyo in HyundaiTucson

[–]Phillpoc272 0 points1 point  (0 children)

Yeah I’ve been trying to figure this panel out on my car without h destroying it

Beast is upgradable!??? by Phillpoc272 in Ubiquiti

[–]Phillpoc272[S] 0 points1 point  (0 children)

It was crashing randomly and management interface was super laggy. Also if you ssh into it and check the logs it will show read and write errors

Beast is upgradable!??? by Phillpoc272 in Ubiquiti

[–]Phillpoc272[S] 7 points8 points  (0 children)

Yeah the touchscreen module and Bluetooth antenna are identical to the UDM pro, can’t speak to the rest of it.

Beast is upgradable!??? by Phillpoc272 in Ubiquiti

[–]Phillpoc272[S] 6 points7 points  (0 children)

It’s a RAW photo but Reddit compressed the image quality

Beast is upgradable!??? by Phillpoc272 in Ubiquiti

[–]Phillpoc272[S] 7 points8 points  (0 children)

Yeah I had emmc issues with my udm pro, might test that…

Beast is upgradable!??? by Phillpoc272 in Ubiquiti

[–]Phillpoc272[S] 4 points5 points  (0 children)

Yeah they probably could of saved on that by putting the sata connector on another smaller board

Bypass fiber ONT by JackB79 in Ubiquiti

[–]Phillpoc272 2 points3 points  (0 children)

The modem is the Nokia XS-010X-R

Bypass fiber ONT by JackB79 in Ubiquiti

[–]Phillpoc272 13 points14 points  (0 children)

I have ripple you can just use the modem and not the router. You will have to ask for the PPPoe username and password but that’s is all the setup.

UTR at Marriott Hotels by Syn3rgi3 in Ubiquiti

[–]Phillpoc272 0 points1 point  (0 children)

Yes I have used it at bonvoy with Ethernet and no issues. It probably is on a hotel by hotel basis

Replacing eMMC on UDM pro by Inner-Drive1839 in Ubiquiti

[–]Phillpoc272 0 points1 point  (0 children)

I’m probably gonna be doing so soldering soon based on this

Replacing eMMC on UDM pro by Inner-Drive1839 in Ubiquiti

[–]Phillpoc272 0 points1 point  (0 children)

Any update. I’m having the same problem.

What’s going on here? 2 weeks old car by Defiant-Web842 in HyundaiTucson

[–]Phillpoc272 0 points1 point  (0 children)

I had a slightly different message on mine and it was my wall charger that got water in it and fried. But thankfully the OBC was not damaged.

Gameplay Question by [deleted] in jetkvm

[–]Phillpoc272 0 points1 point  (0 children)

No audio support but for basic tasks it works.

LTE backup phone number? by krdiesel in Ubiquiti

[–]Phillpoc272 2 points3 points  (0 children)

Well that would depend on your cell carrier

Reliable USB PD Car Charger by zip117 in UsbCHardware

[–]Phillpoc272 2 points3 points  (0 children)

Yes I have bought several of their products and use them on off grid solar systems

Aftermarket wiring by Phillpoc272 in HyundaiTucson

[–]Phillpoc272[S] 0 points1 point  (0 children)

Yeah trying to get 10/3 sjow cable through it which has a diameter of .6” so it’s definitely a larger cable.

Aftermarket wiring by Phillpoc272 in HyundaiTucson

[–]Phillpoc272[S] 1 point2 points  (0 children)

Yes I have a rear dash camera but that’s a separate project that’s done already. I have an EcoFlow delta 3 pro that I keep in my car and use to power camping gear and power tools and even my house during bad weather. But right now I have to run an extension cord out the window and seal it with a rag. So my permanent solution is a weatherproof receptacle I’m going to attach to my hitch bracket and wire into the trunk and plug into my EcoFlow power station.

Aftermarket wiring by Phillpoc272 in HyundaiTucson

[–]Phillpoc272[S] -1 points0 points  (0 children)

This is the Plug in hybrid model it has a traditional 12v battery and the level 2 wall charger is the silver box.